Tender For Repair/Maint To Di/Gi/Ppr Pipelines, Its Joints, Valve Pit Chambers And Allied Works Services At Domestic Area Under Afs Phalodi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Di/Gi/Ppr Pipelines, Its Joints, Valve Pit Chambers And Allied Works Services At Domestic Area Under Afs Phalodi.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer, Air Force Station, Phalodi Name of Work : REPAIR/MAINT TO DI/GI/PPR PIPELINES, ITS JOINTS, VALVE PIT CHAMBERS AND ALLIED WORKS SERVICES AT DOMESTIC AREA UNDER AFS PHALODI. Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out,for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed. |
| 4 | Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 5 | Supply and laying in trenches 15/16 mm bore PPR water tubing, triple layer, PN 16, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 6 | Ditto as per Item No 4 above but 25 mm bore PPR water tubing complete all as specified & directed. |
| 7 | Ditto as per Item No 4 above but 40 mm bore PPR water tubing complete all as specified & directed. |
| 8 | Ditto as per Item No 4 above but 50 mm bore PPR water tubing complete all as specified & directed. |
| 9 | Ditto as per Item No 4 above but 80 mm bore PPR water tubing complete all as specified & directed. |
| 10 | Supply and laying in trenches 15 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 11 | Ditto as per Item No 9 above but 20 mm bore steel tubing complete all as specified & directed. |
| 12 | Ditto as per Item No 9 above but 25 mm bore steel tubing complete all as specified & directed. |
| 13 | Ditto as per Item No 9 above but 40 mm bore steel tubing complete all as specified & directed. |
| 14 | Ditto as per Item No 9 above but 50 mm bore steel tubing complete all as specified & directed. |
| 15 | Ditto as per Item No 9 above but 80 mm bore steel tubing complete all as specified & directed. |
| 16 | Ditto as per Item No 9 above but 100 mm bore steel tubing complete all as specified & directed. |
| 17 | Taking up or down 100 mm bore of pipe DI water mains (including all fittings), with spigot and socket ends jointed with rubber gasket joints , cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody complete all as specified and directed.Note :- Excavation and earth work shall be measured and paid for separately. |
| 18 | Ditto as per Item No 16 above but 150mm bore of pipe complete all as specified & directed. |
| 19 | Ditto as per Item No 16 above but 200mm bore of pipe complete all as specified & directed. |
| 20 | Ditto as per Item No 16 above but 250mm bore of pipe complete all as specified & directed. |
| 21 | Labour for laying only in trenches old serviceable 100 mm bore of DI pipe any class (obtained from item No. 16.00 here-in-before), with spigot and socketed ends, jointed with Rubber tyton including testing complete all as specified and directed.Note : (i) Rubber tyton joints of pipes shall be measured and paid separately under respective items here-in-after.(ii) Cast iron fittings/specials etc shall be measured and paid separately under respective items here-in-after. |
| 22 | Ditto as per Item No 20 above but 150 mm bore of pipe complete all as specified & directed. |
| 23 | Ditto as per Item No 20 above but 200 mm bore of pipe complete all as specified & directed. |
| 24 | Ditto as per Item No 20 above but 250 mm bore of pipe complete all as specified & directed. |
| 25 | Taking up or down 25 mm bore steel tubing and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and relaying pipe from site complete all as specified and directed.Note :-Excavation and earth work shall be measured and paid separately. |
| 26 | Ditto as per Item No 24 above but 40 mm bore steel tubing complete all as specified & directed. |
| 27 | Ditto as per Item No 24 above but 50 mm bore steel tubing complete all as specified & directed. |
| 28 | Ditto as per Item No 24 above but 80 mm bore steel tubing complete all as specified & directed. |
| 29 | Supply, fixing and laying in trenches Ductile iron pipe of size 100 mm class K-7,S/S with inside cement motar lining and out side zinc coating with finishing layer of bitumen with socket ends suitable for rubber gasket push-on jointing ISI marked including testing complete all as specified and directed. |
| 30 | Ditto as per Item No 28 above but of size 150 mm bore complete all as specified & directed. |
| 31 | Supply and Fix in repair in OH tanks Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with required size reducer of pipe bore size 25/20 mm complete all as specified and directed. |
| 32 | M& L for excavation and making proper space to rectify the leakage of DI/CI pipe of size 150 to 250mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed. |
| 33 | M&L for excavation and making proper space to rectify the leakage of CI/DI pipe of size 80 to 100mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed. |
| 34 | M& L for excavation and making proper space to rectify the leakage of galvanize iron pipe of size 25 to 50 mm bore inclduing all required material to rectifiy the leakage complete all as specified and directed. |
| 35 | M& L for to rectify the leakage of CI/DI pipe of size 150 to 250 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of pits complete all as specified and directed. |
| 36 | M& L for to rectify the leakage of CI/DI pipe of size 80 to 100 mm bore inclduing all required material to rectifiy the leakage in existing valve pits including making good the disturbed surface of valve pits complete all as specified and directed. |
| 37 | M & L in replacement DI fitting upto 150 mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars,tail piece,caps and plugs etc. suitable for spigot and socketed pipes, conforming to IS-1536-2001 complete all as specified and directed. |
| 38 | Ditto as per item no 36 but of size 200 to 250 mm dia complete all as specified & directed. |
| 39 | M & L for taking down old unserviceable 250 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. nuts, bolts etc. complete all as specified and directed. |
| 40 | M & L for taking down old unserviceable/rusted 200 mm bore sluice valve for refacing, regrinding and refixing after repairs to CI sluice valve with flanged ends, cast iron body flanged and drilled end, non rising type, including replacement of brass spindle with nuts, gland cap, CI wheel suitable size with including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed. |
| 41 | Ditto as per Item No 39 above but 150 mm bore sluice valve complete all as specified & directed. |
| 42 | Ditto as per Item No 39 above but 100 mm bore sluice valve complete all as specified & directed. |
| 43 | M&L for supply, install, connecting and testing of 250 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed. |
| 44 | M & L for Supply, install, connecting and testing of 200 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type including jointing materials i.e. rubber gaskets, nuts, bolts etc. complete all as specified and directed. |
| 45 | Ditto as per Item No 43 above but 150 mm bore sluice valve complete all as specified & directed. |
| 46 | Ditto as per Item No 43 above but 100 mm bore sluice valve complete all as specified & directed. |
| 47 | Ditto as per Item No 43 above but 80 mm bore sluice valve complete all as specified & directed. |
| 48 | M & L for replacement in repair Rubber gasket joint in CI/ DI Spigot and socket pipes and valve of 250 to 150 mm bore CI/ DI pipe complete all as specified and directed. |
| 49 | Ditto as per Item No 47 above but 100/80 mm bore CI/ DI pipe complete all as specified & directed. |
| 50 | S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ DI Pipe / CI Pipe with nuts, bolts,ring /seal etc complete all as specified and directed. |
| 51 | Ditto as per item no. 49 but of size 80mm bore complete all as specified & directed. |
| 52 | Ditto as per item no. 49 but of size 100mm bore complete all as specified & directed. |
| 53 | Ditto as per item no. 49 but of size 150mm bore complete all as specified & directed. |
| 54 | Ditto as per item no. 49 but of size 200mm bore complete all as specified & directed. |
| 55 | Ditto as per item no. 49 but of size 250mm bore complete all as specified & directed. |
| 56 | Supply, install, connecting and testing in replacement of ball/ Butterfly type, non return valve size 80 mm bore, (as per IS 5312), cast iron body, flanged ends, Valve seat steel rings (LT bronze) and fasteners stainless steel of ISI marked including jointing materials i.e rubber or fibre board, gaskets, nuts, bolts etc., complete all as specified and directed. |
| 57 | Ditto as per Item No 55 above but non return valve size 100 mm bore complete all as specified & directed. |
| 58 | S & F in renewal for gun metal, globe or gate valves size 80 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 59 | Ditto as per Item No 57 above but globe or gate valves size 50 mm bore complete all as specified & directed. |
| 60 | Ditto as per Item No 57 above but globe or gate valves size 40 mm bore complete all as specified & directed. |
| 61 | Ditto as per Item No 57 above but globe or gate valves size 25 mm bore complete all as specified & directed. |
| 62 | Supply, install, connecting and testing in replacement of Air release valve, 80mm bore, Flanged End Heavy, double ball CI body confirming to IS-14845 complete all as specified and directed. |
| 63 | Supply, install, connecting and testing in replacement of Air release valve, 100mm bore, Flanged End Heavy, double ball CI body confirming to IS-14845 complete all as specified and directed. |
| 64 | Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 80mm bore, confirming to IS-4038 complete all as specified and directed. |
| 65 | Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 100mm bore, confirming to IS-4038 complete all as specified and directed. |
| 66 | Supply, install, connecting and testing in replacement of CI Foot valve lift type Screwed / Flanged 150mm bore, confirming to IS-4038 complete all as specified and directed. |
| 67 | M&L in repair of Over Head filling Point GI delivery piping at Technical location SWTs by giving reinforcement with GI pipes/ Angles through fasteners , welding and painting of pipe complete as specified and directed. |
| 68 | M & L in repair of Over Head filling Point delivery piping at strategic location SWTs by fixing flexible canvas piping @ 100mm dia and 1500 mm length complete as specified and directed. |
| 69 | M & L for construction of valve chamber of size 1200x1200x1000 mm deep dimensions (overall internal dimension)for sluice valve etc.with PCC foundation, PCC block masonary wall, Plastering, PCC Coping, White washing, mild steel chamber cover, painting of chamber cover including Excavation and earth work in any type of soil complete all as specified & directed below valve chamber shall be provided with the fallowing specification:-(i) Cement concrete for foundation (1:4:8) type D2 using 40 mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in CM 1:6 complete(iii) internal and exposed surface of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth. (iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall. (v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 6 mm thick MS Sheet with 30x30x5 mm size angle iron frame with hold fast and locking arrangement. (vii) Steel surface shall be painted with two caot s of synthetic paint of first quality over one coat of red oxide primer |
| 70 | M & L for construction of valve chamber of size 600x1600x600 mm deep dimensions (overall internal dimension)for sluice valve etc.with PCC foundation, PCC block masonary wall, Plastering, PCC Coping, White washing, mild steel chamber cover, painting of chamber cover including Excavation and earth work in any type of soil complete all as specified & directed below valve chamber shall be provided with the fallowing specification:-(i) Cement concrete for foundation (1:4:8) type D2 using 40 mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in CM 1:6 complete(iii) internal and exposed surface of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth. (iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall. (v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 6 mm thick MS Sheet with 30x30x5 mm size angle iron frame with hold fast and locking arrangement. (vii) Steel surface shall be painted with two caot s of synthetic paint of first quality over one coat of red oxide primer |
| 71 | supply and fixing Openwell Pump submersible pump,90 feet head 1HP single phase 240 volt complete all as specified & directed. |
| 72 | supply and fixing self priming monoblock pump of capacity 1HP single phase 240 volt complete all as specified & directed. |
| 73 | supply and fixing self priming monoblock pump of capacity 1/2 HP single phase 240 volt complete all as specified & directed. |
| 74 | Supply and Fix in renewal GI Tee size 80 mm bore size ISI marked complete all as specified and directed. |
| 75 | Ditto as per Item No 72 above but 50 mm complete all as specified & directed. |
| 76 | Ditto as per Item No 72 above but 25 mm complete all as specified & directed. |
| 77 | Ditto as per Item No 72 above but 20 mm complete all as specified & directed. |
| 78 | Supply and Fix in renewal GI Elbow size 80 mm bore size ISI marked complete all as specified and directed. |
| 79 | Ditto as per Item No 76 above but 50 mm complete all as specified & directed. |
| 80 | Ditto as per Item No 76 above but 25 mm complete all as specified & directed. |
| 81 | Ditto as per Item No 76 above but 20 mm complete all as specified & directed. |
| 82 | Supply and Fix in renewal GI socket size 80 mm bore size ISI marked complete all as specified and directed. |
| 83 | Ditto as per Item No 80 above but 50 mm complete all as specified & directed. |
| 84 | Ditto as per Item No 80 above but 25 mm complete all as specified & directed. |
| 85 | Ditto as per Item No 80 above but 20 mm complete all as specified & directed. |
| 86 | Supply and Fix in renewal GI Union size 50 mm bore size ISI marked complete all as specified and directed. |
| 87 | Ditto as per Item No 84 above but 25 mm complete all as specified & directed. |
| 88 | Ditto as per Item No 84 above but 20 mm complete all as specified & directed. |
| 89 | Supply and Fix in renewal GI Reducer size 50 to 25 mm bore size ISI marked complete all as specified and directed. |
| 90 | Ditto as per Item No 87 above but 25 to 20 mm complete all as specified & directed. |
| 91 | Ditto as per Item No 87 above but 40 to 20 mm complete all as specified & directed. |
| 92 | Ditto as per Item No 87 above but 40 to 25 mm complete all as specified & directed. |
| 93 | Supply of TDS/PPM tester of measurment range 0 to 9990 ppm,Accuracy +/-2%,Tempreture range 0 to 80 degree ,LCD Display Screen,Battery operated,factory calibrate with digital push button completion all as specified and directed. |
| 94 | M&L for fabrication & fixing in position mild steel work for covers, supporting clamps of pipe, ladders, railing of over head water tank, under ground sump , Open well & water supply installation fabricated with mild steel section such as angle, flat, Tee, nut & bolt etc etc, cutting, welding cold or hot drilling holes in any shape or size and fixing arrangement, including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete using steel section of Fe 290 Grade -165 including dismantling of old steel work complete all as specified & directed. |
| 95 | M& L in Repair for Earthing complete with galvanised mild steel plate electrode 600x600x6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate electrode at a depth not less than 1.5m below normal ground level and including GI Wire 4 mm bolted (with Gl nuts, bolts & check nuts) and riveted to earth plate electrode at one end connected to metallic bodies of LT equipment etc at the other and earth strip encased in and including 15 mm bore Gl light grade pipe with all fittings from top of earth plate electrode to body of equipment fixed with and including 4 MM iron clamps bolts, nuts and washers and including providing watering pipe 20mm bore GI Pipe electrode complete all as specified and shown in elctrical plate No 3 of MES SSR Part-1. the scope of work includes necessary excavation and earth work in any type of soil. removal of soil upto 50 metre PCC pit with precast RCC cover, charcoal/salt funnel, Cl frame etc complete all as specified & directed. NOTE: (I) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.50 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC(1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of Cl cover. Reinforcement in cover shall be of 8mm dia TMT bars @ 150mm c/c both ways.(ii) Item includes the cost of 7.5 metre Gl pipe for protection of earth strip.(iii) Item includes cost of 7.5 metre earth lead strip(iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thinkness of 15 cm on all sides. |
| 96 | supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire completion complete all as specified & directed. |
| 97 | M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling and mass complete all as specified & directed. |
| 98 | M&L Submersible fountain Light LED underwater adjustable ,colour full and scape, spotlight, IP68 waterproof submersible light complete all as specified & directed. |
| 99 | Supply only calcium based high strength chlorination chemical (65% - 70%) for water disinfectant in granular from in factory sealed HDPE Container 45 to 50 Kg complete all as specified & directed. |
| 100 | S&F in repair Pressure gauge of capacity 0 -10 Kg/cm2 range with n siphon stop valve including all necessary GI pipe connection fittings / cutting / jointing complete all as specified & directed. |
| 101 | M& L for making connection from existing 80 mm bore CI / GI water pipe line by providing mild steel two piece half round clamp fabricated with 60 mm wide & 5 mm thick mild steel flat bend to shape welding 25 mm size socket, including nut bolt, rubber packing, drilling hole in existing pipe line & painting of clamp with anti corrosive paint complete all as specified & directed. |
| 102 | M& L for making connection from existing 100 /150 mm bore CI / GI water pipe line by providing mild steel two piece half round clamp fabricated with 60 mm wide & 5 mm thick mild steel flat bend to shape welding 25 mm size socket, including nut bolt, rubber packing, drilling hole in existing pipe line & painting of clamp with anti corrosive paint complete all as specified & directed. |
| 103 | M& L for making connection from existing 200 /250 mm bore CI / GI water pipe line by providing mild steel two piece half round clamp fabricated with 60 mm wide & 5 mm thick mild steel flat bend to shape welding 25 mm size socket, including nut bolt, rubber packing, drilling hole in existing pipe line & painting of clamp with anti corrosive paint complete all as specified & directed. |
| 104 | S&F in repair stainless steel Spindle of 80 / 100 mm size cast iron sluice valve including replacement of gland nut bolt etc complete all as specified & directed. |
| 105 | S&F in repair stainless steel Spindle of 150 mm size cast iron sluice valve including replacement of gland nut bolt etc complete all as specified & directed. |
| 106 | S&F in repair stainless steel Spindle of 200/250 mm size cast iron sluice valve including replacement of gland nut bolt etc complete all as specified & directed. |
| 107 | Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 10 Sqmm 3 core complete all as specified & directed. |
| 108 | S&F in repair Lawn Sprinkler Connection Size 20/25 mm Pop Up Height 4 inch,body height 6 inch, Spray Pattern Full Circle Sprinkler Type Irrigation system Material Plastic Pressure10 Bar Automation Grade Automatic Body Type Pop up Type Size/Diameter 75 mm complete all as specified & directed. |
| 109 | Removing of vegetations/bushes/foreign in all over RGLC campus materials etc around pump houses etc throwing the wastage at a distance not less than 500 mtr as and where after that chemical spreading all over the vegetation for complete burn ot of root complete all as specified & directed. Note -T&P and safety equipment required for the work is to be provided by the contractor. |
| 110 | Removing of vegetations/bushes/foreign in all over Central pump House / MAP pump House campus materials etc around pump houses etc throwing the wastage at a distance not less than 500 mtr as and where after that chemical spreading all over the vegetation for complete all as specified & directed. Note -T&P and safety equipment required for the work is to be provided by the contractor. |
| 111 | Taking up or down 20/25 mm bore CPVC pipes and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed.Note :-Excavation and earth work shall be measured and paid separately. |
| 112 | Supplying and laying of 40 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified & directed. |
| 113 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified & directed. |
| 114 | Ditto as per item no.112 but of size 20mm dia complete all as specified & directed. |
| 115 | S&F in repair 25 LPH RO + post carbon water purifier With TDS adjuster,Heavy duty,ABS Plastic,25 Ltrs capacity,advanced TDS adjuster,enhance water safety with continuous,wall mounted(RO+ Post Carbon + TDS) including all connected items for fixing from sources complete all as specified and directed. |
| 116 | S&F in repair 50 LPH RO + post carbon water purifier With TDS adjuster,Heavy duty,ABS Plastic,25 Ltrs capacity,advanced TDS adjuster,enhance water safety with continuous,wall mounted(RO+ Post Carbon + TDS) including all connected items for fixing from sources complete all as specified and directed. |
| 117 | Testing of water sample of pump houses / RGLC / RO Plant and other water supply installation of GE(AF) phalodi for bacteriological and chemical testing from NABL approved laboratory including submitting the report to the engineer in charge , compolete all as specified. Note:- New bottel for sample collection is responsiblity of contractor. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender