Tender For Mtps- I - O&Ahs - Ahph-I - Breakdown Repair Works In The Ash Slurry Pumps, High Pressure Water Pumps, Low Pressure Water Pumps, Flush Water Pumps, Seal Water Pumps, Sump Pumps, Cable Trench Pump, Ash Slurry Sumps, Related Pipelines And Val
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
12 days left
EMD
21000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps- I - O&Ahs - Ahph-I - Breakdown Repair Works In The Ash Slurry Pumps, High Pressure Water Pumps, Low Pressure Water Pumps, Flush Water Pumps, Seal Water Pumps, Sump Pumps, Cable Trench Pump, Ash Slurry Sumps, Related Pipelines And Valves In Ash Handling Pump House, Stage-I For The Period Of One Year From The Date Of Commencement Of Work.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for replacement of existing wornout oil seals in the drive end side of the Ash Slurry pump by removal of drive end assembly, replacing the and reassembling the same, belt tension and alignment works as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 2 | Charges for replacement of existing wornout spares/oil seal in the non-drive end side of the Ash Slurry pump by removal of suction & discharge spool pieces, suction side door, Suction side wear plate, suction flange, outer casing, inner casing, impeller, bracket side door, bracket side wear plate, gland housing, expeller, shaft sleeve, liquid thrower and belts, replacing the and reassembling the same, belt tension and alignment works as directed by the Engineer in charge at site. (Including consumable and T&Ps) |
| 3 | Charges for dismantling the High pressure water pumps, Low pressure water pumps, flush water pumps or sump pump(A) by decouple the pump from the motor, dismantling the entire pump, replacing the wornout spares, reassembling and alignment works as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 4 | Charges for dismantling the cable trench pump, seal water pump or sump pump (B) by decouple the pump from the motor, dismantling the entire pump, replacing the wornout spares, reassembling and alignment works as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 5 | Charges for replacement of existing wornout NDE bearing in the High pressure water pumps, Low pressure water pumps, flush water pumps or seal water pumps by dismantling the bearing end cover, replacing the wornout bearing, reassembling and alignment works as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 6 | Charges for replacement of existing wornout DE bearing / shaft sleeves in the High pressure water pumps, Low pressure water pumps, flush water pumps or seal water pumps by decouple the pump from the motor, dismantling the pump, replacing the wornout bearing / shaft sleeves, reassembling and alignment works as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 7 | Charges for replacing the worn out (or) punctured M.S. spool piece by dismantling the sleeve joint, flange joint, dismantling the punctured M.S. spool piece, fabrication of new spool piece, erection and line joining work in the Ash slurry pipe lines in Ash handling pump house as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 8 | Charges for patch welding works in the worn out (or) punctured portion of the Ash slurry pipeline by dismantling the sleeve joint, flange joint, dismantling the punctured pipe line, half round patch welding work and line joining work in the Ash handling pump house as directed by the Engineer in charge at site. (Including consumable and T&Ps) |
| 9 | Charges for dismantling the worn out (or) punctured 200 /250/ 300 NB valves, repairing and reassembling in the existing pipe lines in Ash handling pump house as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 10 | Charges for replacing the existing worn out 80 /100 / 200 / 250 / 300 NB valves in the Ash handling pump house as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 11 | Charges for replacing the existing worn out / punctured seal water line for Ash slurry pump, erection of new line and related valves in the Ash handling pump house as directed by the Engineer in charge at site.(Including consumable and T&Ps) |
| 12 | Charges for replacement of damaged / worn out bearings in the ash slurry pumps including of de-coupling the pump from the motor dismantling of suction and delivery spool pieces ,outer casing ,bracket side, wear plate,bracket side door ,impeller, dismantling of driven pulley from shaft, gland housing, liquid thrower inner and outer bearing caps etc.(Including consumable and T&Ps). |
| 13 | Reassembling of the ash slurry pumps.(Including consumable and T&Ps) |
| 14 | Charges for dismantling the worn out(or) punctured MS ERW new bend and fabrication, erection by cutting and welding as per site condition (300 NB) (Including consumable and T&Ps) |
| 15 | Charges for welding of M.S. flanges with 300 NB MS ERW pipes and newly fabricated bends.(Including consumable and T&Ps) |
| 16 | Charges for fabrication of M.S. flanges diaof OD490mm including cost for transportation to outside work shop and return.(Including consumable and T&Ps) |
| 17 | Charges for dismantling the punctured /heavily worn-out ‘T’ joint and erection of newly fabricated M.S. ‘T’ joint and line joining work. (Including consumable and T&Ps) |
| 18 | Charges for fabrication of new M.S. ‘T’joint with proper alignment work etc.(Including consumable and T&Ps) |
| 19 | Cost of Bearing No. 6311 Make: SKF or Equivalent |
| 20 | Cost of 19mm square PTFE Graphite Gland Rope |
| 21 | Cost of 12mm square PTFE Graphite Gland Rope |
| 22 | Cost of cutting gas |
| 23 | Cost of MS welding electrode Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender