Tender For Proposed Interior Work Of Uran Municipal Council Town Hall Building At Uran
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2026
0 days left
EMD
5.49 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Interior Work Of Uran Municipal Council Town Hall Building At Uran
BOQ
| Sl. No. | Item Description |
| 1 | Full Height Partitions in Solid finish Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 2 | Full Height Partitions in Solid finish with glassProviding and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 3 | Acoustical Panelling made from Fabric wrapped Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete |
| 4 | Acoustical Panelling made from 12mm wp Ply woodProviding & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete |
| 5 | Stage flooring Providing & fixing inposition Stage flooring Made from 18mm plywood 1200x2400 & 18mmTeakwood planks 100x800 having tongue & groveon Sal-woodframe of 50x 100 at 600mm c to c onstage surface includingcost of requiredCut-Outs, decorative mouldings / finishing-items / polishetc., asperArchitectural&AcousticalDesign& Instructions&Complete in all aspects. .including allmaterials labour,finishing etc complete |
| 6 | Acoustical Ceiling Providing & Fixing inposition ,Acoustical Ceiling made from Compressed polyester fibre nonwoven 9 mm panels on approved heavy duty GIframe 300 mm ctoc & intermediate channels at 1200 mm c toc, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing - items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete |
| 7 | Acoustical Panelling made from12mm thick Agrowood stripsProviding & Fixing in position , Acoustical Panelling made from 12mm thick Agrowood strips of 50, 75 7100mm wid thon 50x50 mm Sal-wood frame of 600x600 c toc having supports from wall of required length, in front of 1000gsm synthetic wool 50mm thick with approved coloured fabric on strips side & chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items /Melamine Polish & Scaffolding, as per Architectural & Acoustical Design & Instructions & Completeinall aspects. including all materials labour,finishing etc complete |
| 8 | Carpet Flooring Providing & Fixing in position, Carpet more than 800+gsm, made with100% stainproof fibres of approved make along with 5mm under lay as per Architectural & Acoustical Design &I nstructions & Complete in all aspects including all materials labour,finishing etc complete |
| 9 | Auto-glow Aluminium extruded stripsProviding & Fixingin position, 1000 mm wide Auto-glow Aluminium extruded strips on auditorium steps as per Design & Instructions & Complete in all aspects. Make Piccolo or Nexus |
| 10 | Ms fabrication workProviding & Fixingin position, Ms fabrication work using angles, sqr tubes, c channels etc for various partition frame asper Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete |
| 11 | Under Deck insulation for metal deck Providing & Fixingin position, Under Deck insulation for metal deck using 1000 Gsm synthetic wool with fixed to deck using adhesive and chicken mesh. |
| 12 | Heavy duty fully upholstered Auditorium chairsProviding & fixing in position,heavy duty fully upholstered Auditorium chairs 520 mmc toctip-uptype. Heigh to back should be lessthan 1030 mm with plastic protective cover on back and bottom having teakwood handles.Back to back distance is 1000 mm.The auditorium chairs should be of following specifications 1.Powder Coated Heavy duty MS Stand. 2. Individually moulded , ergonomically designed seat and back cushions. 3.Moulded Polyurethane Foam cushion. PU foam density 48–52 Kilograms /cu.mtr 4. Moulded Polyurethane Foam manufactured incertified ISO9001 facility to ensure consistency in density for long evity.5.Upholstered in Foam laminated stretch sand wich Fabric for clean finish and soft comfortable feel as per the colour & pattern selected by the client. 6.SeatandBackshouldhavemouldedsyntheticprotective cover. 7.WoodenorPUarmrest 65mmx20mm -330mm long . 8.Mountedusing Anchor fasteners. |
| 13 | Solid Core Flush door Single leafSolid Core Flush door Single leaf Providingand fixing factory made solid core flush door insingle leaf 35mmthick, decorative types, ofexteriorgrade, asperdetaileddrawings, conforming toI.S.:2202 1962 (Revised)with approved face veneers on both faceswith/without glazing and venetians in thepositions shownon thedrawingsor asdirected, all necessarybeads, mouldingandlipping, holdfasts,mat finishstainlesssteelfixturesfastenings, finishing withfrench-polish/waxingcomplete. (withoutdoor frame).(Sample tobegot approved from Ex.Engineer before use) Commercial Hard Wood shutte |
| 14 | Acoustical DoorsProviding & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete |
| 15 | Directional signageFloor Directories Providing and fixing acrylic multilingual Braille (raised dots) ADA compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor plan and the list of rooms on that floor, to be installe done ach floor near the staircase, desig nedas perstandards and having 4mm thick blue acrylic base plate with Upper Case San Serifwordsands ymbolsmade of white acrylic non glare cutout letters of height 20 mm raised not less than 0.8 mm above base plate and the equivalent word / swritten in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above baseplate. Grade 2/ Grade 1Braille to be in tegral with thes ignface and beraised 0.5 mm above baseplate. Eac hdirectorytobe fixe dasper manufacturers specifications on the wallat theapproved location ata height of 1200mm from FFLand as per the directions by the engineer in charge. |
| 16 | Floor DirectoriesFloor Directories Providing and fixing acrylic multilingual Braille (raised dots) ADA compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor plan and the list of rooms on that floor, to be installe done ach floor near the staircase, desig nedas perstandards and having 4mm thick blue acrylic base plate with Upper Case San Serifwordsands ymbolsmade of white acrylic non glare cutout letters of height 20 mm raised not less than 0.8 mm above base plate and the equivalent word / swritten in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above baseplate. Grade 2/ Grade 1Braille to be in tegral with thes ignface and beraised 0.5 mm above baseplate. Eac hdirectorytobe fixe dasper manufacturers specifications on the wallat theapproved location ata height of 1200mm from FFLand as per the directions by the engineer in charge. |
| 17 | FIREORDER-signagesSupplying and installing of in position the signages \\"FIREORDER\\" it should contain the following matteron 3mm thick \\"Opaque\\" PVC foam board of computerizedcut, PVC Non-reflective self adhesivevinylepainted foamboardof 3' x4'.Product tobeADA compliant and modular system. |
| 18 | Gypsum False Ceiling Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc.all complete. |
| 19 | PAINTING - Texture PaintProviding and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 20 | MEDIUM BACK CHAIR - PROJECTOR /BILLINGProviding & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery |
| 21 | Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 22 | Sofa 3 seaterProviding & fixing Sofa Set 3 seater Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat |
| 23 | Sign-Board Providing and fixing of company name on back side of reception counter panelling at required level with 1.50mm thick brushed stainless steel channel box lettering of minimum ht of 150mm in ARIAL FONT, inclusive of stainless steel holdfast, screws etc. for each letter inclusive of drilling holes at required intervals etc. This should be fixed in line and level with all the required accessories including scaffolding and making good etc.complete as required by the Architect..(steel 304 18gj.)All the materials shall be of approved make. |
| 24 | Granite cladding. (lift door cladding)Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) |
| 25 | S.S RAILINGProviding and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete |
| 26 | Granite cladding. (Wall cladding)Providing and laying telephone black / AmbaWhite / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc.OnC.M. 1:6 including filling joints with polymer base filler nosing/ moulding the sharp edges wherever necessary, curing, etc. complete |
| 27 | Free Standing Table @ 1500Lx600Dx750HT Free Standing Table @ 1500Lx600Dx750HT Providingand fixingTableofSize1500x600x750mm. Top:made from25mm Prelaminated Particleboard. All edgesarecoveredby2mm.Thk.PVCedgebands glued by hot melt glue applied by auto edge banding machine.Legs:CShapemadefromCRCASheetwithPowderCoatfinish.Modestypanel:Madefrom18mmbothsideprelaminatedparticleboards.Alledgesarecoveredby0.8mmPVCedgebandsgluedbyhotmeltglueappliedbyautoedgebandingmachine.KEYBOARD TRAY(WITHOUTMOUSETRAY) :-MetalPowderCoated-BlackColor,CPU TROLLEY:-Metal PowderCoated-BlackColor, 3DRAWERPEDESTALUNIT havingoverallsize392Lx450Dx680Ht.mm.withcentral lockandkey.Drawersand bodyarecompletemetalwithpowdercoat finish, faciain18mmprelaminatedparticle |
| 28 | Low Height Openable Storage @ 900Lx450x750HTLow Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storageof 900 x 450 x 750Ht ,with 2 adjustable shelves,Completebody & shuttermadein 0.8mmthick & Topin 2mm thick CRCA,2 Shutter to be mounted witht hehelp of cuphinges, and 4 adjustable levelers, enitrestorage in powder coated finish with 60 to 80 microns. with 25mm. thk additional To pontopof |
| 29 | LIFTSupplying, erecting, testing & commissioning programmable rope mounted Overload Warning Device (OWD) within built digital indicator complete with required wiring & accessories with audio visual indication in lift car including dismantling of existing accessories as applicable. |
| 30 | Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI |
| 31 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. |
| 32 | Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner. |
| 33 | Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall with insulating and non-corrosive bond in an approved manner with required joints. As per specification no. EAEP. |
| 34 | Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EAEP. |
| 35 | Supply, Installation, testing and commissioning of Lift with following specifications ('PWD (E) CSR2022-23-Item No 17-1-4-Pg, No-245)SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg Floors :- G+1 floor (2 Stops/2 Landings) Travel :- 3 to 4.2 mtrs Location of Lift Machine:- MR/MRL Rated speed :- 1.0mps VS Car/Landing door clear opening of 800 mm wide x 2000 mm high Clear Car size of ......mm wide x ......mm deep x 2250mm high Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel directionprotection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries.Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · ift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.Other mechnical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General:- Job includes entire procedure of obtaining all necessary erection permissions & \\"License to Work the Lift\\" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings |
| 36 | For Lift travelling up to six floors or at a speed of 1.0 mps, add as below,( 'PWD (E) CSR2022-23-Item No A-2 -Pg, No 274)For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. |
| 37 | For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. |
| 38 | For additional 2 MP CammeraDesiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft. with control key board, DVR, Hard Disk,cables, UPT transreceivers etc. complete with not less han following specifications.1. Four numbers of IP Camera with night vision functionality with range up to 30 meters. Camera construction shall besuitable for weather proof outdoor installation.2. Eight Channel DVR with metal body construction, having software features of motion detect recording.3. 3.5 inch 2 GB HDD 4. 8 port POE Switch5. 32 inch LED Screen, Keyboard & mouse. |
| 39 | For additional 2 MP Cammer |
| 40 | Networking SystemCat-6 cable (Un-Armoured) for connectivity of cameras onto the network |
| 41 | Supplying, fixing, and configuring 48 Ports managed gigabit switch 10/100/1000 Mbps + 4 SFP ports erected in provided rack complete. |
| 42 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 43 | Supplying and fixing 17U floor mount rack (Dimension-DxWxH – 800x600x954 mm) as per specification No. WG-NAS/RAK |
| 44 | Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. |
| 45 | Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 46 | Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW |
| 47 | Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete. |
| 48 | 1) Add Rs. 38159.00 for additional 16 extension card for digital (hybrid) type EPABX |
| 49 | Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete |
| 50 | Supplying, installing, testing & commissioning IP telephone instrument as perspecification complete |
| 51 | Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW instrument desk top unit as per specification complete |
| 52 | Supply & inst of crone box |
| 53 | HVACSUPPLY OF HITACHI MAKE 15 TR FLOOR STANDING DUCTABLE UNITS ( R-410 GAS -) OPEN HALL |
| 54 | SUPPLY OF HITACHI MAKE 11 TR CYLING SUSPENDED DUCTABLE UNITS ( R-410 GAS -) LOBY |
| 55 | Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condenser, dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. APAC/ WAC |
| 56 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC |
| 57 | Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) |
| 58 | Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 40 litres per hour and storage capacity 80 litres with partially stainless steel body As per specification no. APWCR/ WC |
| 59 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete |
| 60 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. |
| 61 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/C |
| 62 | Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete |
| 63 | Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC 2017. |
| 64 | Providing and applying of acoustic insulation for air ducts with 25mm thick, 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete. |
| 65 | Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. |
| 66 | Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size |
| 67 | Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. |
| 68 | Supply, installation, testing and commissioning 20G Rect Angle Ducting kits etc. complete. |
| 69 | Supply, installation, testing and commissioning 22G Rect Angle Ducting kits etc. complete. |
| 70 | Supply, installation, testing and commissioning 24G Rect Angle Ducting kits etc. complete. |
| 71 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 16 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 72 | 300W LED Profile Spot 19 Degree Light Supply, installation, testing & Commissioning of 300W LED Profile Spot 19 Degree Light complete with,3200K CCT Colour Temperature 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing,Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflectorEfficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtr above 11412 suitable to illuminate the key presenter or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Brand embossed impact on the light body for genuine product Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 73 | 300W LED Profile Spot 19 Degree LightSupply, installation, testing & Commissioning of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual AdjustmentDmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtr above 11412 suitable to illuminate the key presenter or talent on stage.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory.Brand embossed impact on the light body for genuine productApproved Make: Leksa Lighting / Lytmaster / Markrich |
| 74 | 400W LED Blinder Light 30 Degree Supply, installation, testing & Commissioning of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 8 Channel modes CRI & TLCI Value > 95 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 410W11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 75 | DmX & RDM Control options with latest technologySupply, installation, testing & Commissioning of DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embossed impact on the light body for genuine product Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 76 | Supply, installation, testing & Commissioning of 18 x 10W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumi led / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 10W Lamp source x 18 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Colour Mixing through DmX 0 ~ 100% Linear dimming, In built presets for different colours Strobe Mode 20 times/SecData DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacityPower In and Out Connections High precision colours, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effectsRigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embossed impact on the light body for genuine produc Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 77 | 54x3W LED 3200K Par Light Beam Angle 25° Supply, installation, testing & Commissioning of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Lumi led / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady colour No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s65dB ~ 130dB Sound sensing capacityPower In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection.RDM Control options with latest technology (RDM ID to be specified)LM79 Certificates from NABL Accredited laboratory Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embossed impact on the light body for genuine product Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 78 | Aluminium O Type clamp made up of high gradeSupply, installation, testing & Commissioning of Aluminium O Type clamp made up of high grade aluminium having thickness not less than 5mm suitable for round tubes of dimension varying from 40 to 55mm outer daimeter, provided with fixture mounting 25mm M8 bolt and wing nut, minimum 100KGs of safe working load, 40mm bolt and wing nut for pipe locking. Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 79 | Light Fixture dual safety Supply, installation, testing & Commissioning of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleeve on the rope. Carabiner Clip Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 80 | Suspender cum clamps designed made out of MSSupply, installation, testing & Commissioning of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 81 | Fixed stage Lighting bar/winch of 16Mtr lengthSupply, installation, testing & Commissioning of Fixed stage Lighting bar/winch of 16Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal BoreMaterial for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 82 | Fixed stage side Ladder as per the designSupply, installation, testing & Commissioning of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 83 | Fixed FOH Lighting bar/winch of 17Mtr length cSupply, installation, testing & Commissioning of Fixed FOH Lighting bar/winch of 17Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal BoreMaterial for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 84 | power junction box 4 way made up of MS Sheet metal fabricated housingSupply, installation, testing & Commissioning of High quality power junction box 4 way made up of MS Sheet metal fabricated housing.Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C20˚C to +70˚C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing Approved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 85 | High quality power junction box 2 way made up of MS SheetSupply, installation, testing & Commissioning of High quality power junction box 2 way made up of MS Sheet metal fabricated housing.Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plugarrangement for wall/floor fixing Approved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 86 | High quality Dimming In junction box 1 way made up of MS SheetSupply, installation, testing & Commissioning of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator materialAll metal housing offers best overall RF protection & lectromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Approved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 87 | DmX Loop Junction BoxSupply, installation, testing & Commissioning of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint.High temperature resistant insulator materialAll metal housing offers best overall RF protection &electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixingApproved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 88 | DmX Male Female Connectors Supply, installation, testing & Commissioning of SITC of DmX Male Female Connectors 5 Pin having rubber sheath protection for Cross connecting DmX wiring connectionsApproved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 89 | DmX Male Termination ConnectorSITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal defaming Approved Make: Leksa Lighting / Nuetrick/ Aultra Lighting |
| 90 | DmX Male Termination Connector DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files. Approved Make: Leksa Lighting / Lite Puter / Avolite |
| 91 | Opto isolated RDM enabled DmX splitter unit SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs Slow blow safety fuse 5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. Approved Make: Leksa Lighting / Lite Puter / Avolite |
| 92 | Copper unarmoured Flexible cableSupplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 93 | 5 Core DmX CableSITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal.Approved Make: Leksa Lighting / Falcon/ Belden |
| 94 | Suspender cum clamps SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process withvarious chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 95 | Profile MS Hot rolled strips 3mm thick SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint Approved Make: Leksa Lighting / Lytmaster / Markrich |
| 96 | Motor Control Panel with DMX & Manual selectable Motor control panelSITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 2 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters operated wireless smart working functionality for the motorised lightbars should be there with one neutral & phase connection slots and with 2 virtual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety featuresApproved Makes: Leksa Lighting / Seimens/ Markrich |
| 97 | Cable Connecting Circuit BoxesSITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc.Approved Makes: Leksa Lighting / Seimens/ Markrich |
| 98 | Copper unarmoured Flexible cable SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Approved Makes: Polycab / SBEE/ Walna |
| 99 | Copper unarmoured Flexible cable Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 100 | High quality Velvet fabric fire retardant treated (For Main Curtain) SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 20Mtr x 7 Mtr. Approved Makes: Nexgen / Om Phile/ Comrade |
| 101 | Glazed Cotton fabric fire retardant treated (For Rear Curtain)SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 20Mtr x 7 Mtr.Approved Makes: Nexgen / Om Phile/ Comrade |
| 102 | Glazed Cotton fabric fire retardant treated (For Rear Curtain)SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 20Mtr x 7 Mtr.Approved Makes: Nexgen / Om Phile/ Comrade |
| 103 | f High quality Velvet fabric fire retardant treated (For Main Valance) SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 19Mtr x 1.5Mtr.Approved Makes: Nexgen / Om Phile/ Comrade |
| 104 | f High quality Velvet fabric fire retardant treated (For Wing) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 7Mtr x 1.5Mtr Approved Makes: Nexgen / Om Phile/ Comrade |
| 105 | Glazed Cotton fabric fire retardant treated (For Wing) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 7Mtr x 1.5Mtr Approved Makes: Nexgen / Om Phile/ Comrade |
| 106 | Fixed Valance Bar 19 Mtr Length Straight as per the designSITC of On Stage Fixed Valance Bar 19 Mtr Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust freeApproved Makes: Leksa Lighting / Aultra Lighting / Markrich |
| 107 | ProjectorProjector, Full Hd Resolution (1920 x 1080 Pixels), 3200 Lumen, 15000 : 1 Contrast Ratio, 2 HDMI Ports, USB , 3D,Rugged design, etc. |
| 108 | Projector ScreenSITC of 84\\" Portable Indoor Outdoor Projector Screen, 84 Inch Diagonal Projection and Pull Up Foldable Stand Tripod. |
| 109 | Ceiling bracketCeiling bracket 1meter for projector including all fitting accessories. |
| 110 | Intelligent Addressable Fire Alarm System (FF-AFAS)Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ- ACwith inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP |
| 111 | Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP |
| 112 | Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF AFAS/SD . |
| 113 | Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \\"Break Glass\\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. |
| 114 | Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM |
| 115 | Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM |
| 116 | Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM |
| 117 | Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. |
| 118 | Supplying, installing, testing and commissioning of digital linear heat detection cable addressable through monitor module with temperature ratings such as 60° 70°C, conforming to IS 2189: 2008, EN 54 or UL listed FF-AFAS/LHDC. |
| 119 | Sound SystemSupplying, erecting testing and commissioning of QSC MAKE 15'' 500 WATT TWO WAY PASSIVE CABINET SPEAKERS. (8 SIDE OF THE HALL) connections complete as per specification |
| 120 | Supplying, erecting testing and commissioning of QSC MAKE 2000 WATT STEREO POWER AMPLIFIER. connections complete as per specification |
| 121 | Supplying, installing, testing and commissioning of QSC MAKE 12'' 1000 WATT POWERED MONITOR SPEAKERS. (FOR STAGR USE) connections complete as per specification |
| 122 | Supplying, installing, testing and commissioning of QSC MAKE 18'' 800 WATT PASSIVE SUBWOOFER. (BASS EFFECT FOR AUDITORIUM)connections complete as per specification |
| 123 | Supplying, erecting testing and commissioning of QSC MAKE 1600 WATT STEREO POWER AMPLIFIER.(FOR SUBWOOFER) connections complete as per specification |
| 124 | Supplying, erecting testing and commissioning of DRIVERACK MAKE ACTIVE CROSSOVER connections complete as per specification |
| 125 | Supplying, erecting testing and commissioning of YAMAHA MAKE 16 CH MIXER (FOR INSERT MICROPHONES) connections complete as per specification |
| 126 | Supplying, erecting testing and commissioning of 24U RACK FOR AUDIO EQUIPMETS. connections complete as per specification |
| 127 | Supplying, erecting testing and commissioning of QSC MAKE 15'' 500 WATT TWO WAY PASSIVE CABINET SPEAKERS WALL MOUNT STAND connections complete as per specification |
| 128 | Supplying, erecting testing and commissioning of QSC MAKE 15'' 500 WATT TWO WAY PASSIVE CABINET SPEAKERS FITTING CHARGES connections complete as per specification |
| 129 | Supplying, erecting testing and commissioning of ALL SPEAKERS WIRING WITH SPEAKER CABLE & SIGNAL CABLES FROM SPEAKERS TO RACK.connections complete as per specification |
| 130 | COMMISSIONING & TESTING CHARGES. |
| 131 | Microphone systemDelegate unit Microphone |
| 132 | Supplying, erecting testing and commissioning of STUDIOMASTER MAKE CORDLESS HAND MIC. |
| 133 | Supplying, erecting testing and commissioning of STUDIOMASTER MAKE CORDLESS LAPEL MIC. |
| 134 | Supplying, erecting testing and commissioning of INTERFACE SYSTEM. |
| 135 | Supplying, erecting testing and commissioning of MALE/ FEMALE XLR MIC CORED FROM MIC TO MIXER. |
| 136 | Supplying, erecting testing and commissioning of AHUJA MAKE PODIUM. |
| 137 | Supply & installation of Microphone floor stand |
| 138 | COMMISSIONING & TESTING CHARGES. |
| 139 | DB AND CABLESSupplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 140 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 141 | Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 142 | Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 143 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB |
| 144 | Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 |
| 145 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 146 | Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO |
| 147 | Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO |
| 148 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 149 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 150 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 151 | CablesSupplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 152 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 153 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 154 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 155 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 156 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 157 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 158 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 159 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 160 | LT cable terminationProviding & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT |
| 161 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 25 to 50 sq mm., with necessary material as per specification No. CB-JT/LT |
| 162 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 150 to 185 sq mm., with necessary material as per specification No. CB-JT/LT |
| 163 | Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq mm., with necessary material as per specification no. CB-JT/LT |
| 164 | Cable traysProviding & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 165 | Providing & erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. |
| 166 | EarthingSupplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 167 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 168 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. |
| 169 | Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall with insulating and non-corrosive bond with required joints. As per specification no. EA-EP. |
| 170 | Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. |
| 171 | Lightning Protection SystemSupplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. |
| 172 | Providing and back filling ground enhancing compound 25 kg bag complete. |
| 173 | 25 x 6mm Tinned copper |
| 174 | 25 x 6mm GI Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender