Tender For Construction Of Asnahara Pressure Irrigation System On Baghapar Dy In District Basti.
Tender Value
8.94 Crore
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
17.90 Lakhs
Bank guarantee accepted
Document Fee
7900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Basti → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Asnahara Pressure Irrigation System On Baghapar Dy In District Basti.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Other | Other | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of trenches for pipe laying work in all type of soil including cost of all T. & P., labour etc. |
| 2 | Providing and supplying D.I. (K7) pipes of following class and diameters confirming to the I.S. specification including F.O.R. anywhere in U.P. up to stores of consignees, inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges etc. |
| 3 | DI K7 pipe-700 mm |
| 4 | DI K7 pipe-600 mm |
| 5 | DI K7 pipe-500 mm |
| 6 | DI K7 pipe-450 mm |
| 7 | DI K7 pipe-400 mm |
| 8 | DI K7 pipe-350 mm |
| 9 | DI K7 pipe-300 mm |
| 10 | DI K7 pipe-250 mm |
| 11 | DI K7 pipe-200 mm |
| 12 | DI K7 pipe-150 mm |
| 13 | Lowering, laying and jointing in proper grade and alignment D.I.pipes with cost of all jointing materials (rubber packing, nutbolts etc.) including cost of conveyance from store to site of works , all labours involved , etc. complete Only SB Rubber Gasket to be used as per IS 5382 and IS12820 (for all class of pipes) (For all class of pipes) |
| 14 | DI K7 pipe-700 mm |
| 15 | DI K7 pipe-600 mm |
| 16 | DI K7 pipe-500 mm |
| 17 | DI K7 pipe-450 mm |
| 18 | DI K7 pipe-400 mm |
| 19 | DI K7 pipe-350 mm |
| 20 | DI K7 pipe-300 mm |
| 21 | DI K7 pipe-250 mm |
| 22 | DI K7 pipe-200 mm |
| 23 | DI K7 pipe-150 mm |
| 24 | Supply and carting up to site of work of the following dia DI sluice valves class I confirming to IS: 780/1969 or its latest amendments including valve fittings & Dismantling Joints as per requirement F.O.R. destination and lowering them into the already prepared trenches fixing in position and jointing them with pipelines and testing etc. complete and also including supply of jointing materials etc. complete including all taxes and insurance as per instructions of Engineer ‐in ‐charge. |
| 25 | 250 mm at outlet |
| 26 | 150 mm at outlet |
| 27 | 100 mm at outlet |
| 28 | Providing and supplying ISI standard 150/100 mm DI (K7) pipes at outlets, DI flanged socket spigot bends, tees, reducer or any other specials as per BS-EN-545/1995 sutiable for use with DI pipes including cost of labour, materials, and transportation to stores / site, loading and unloading in all respect.(D. I. specials & fitting as per site requirement for proper completion of work.) |
| 29 | Earth in excavation of foundation for sedimentation tank, pump house, intake structure, boundary wall etc in all type of soil including all lead & lift, and its proper disposal and back filling as per direction of Engineer in charge required for proper completion of work including cost of all T. & P., labour etc. |
| 30 | Centering & Shuttering for C.C / R.C.C. work in different parts of structures required for proper completion of work including cost of all materials and scaffolding, labour ,T.&P. etc. |
| 31 | Centering & Shuttering for C.C / R.C.C. work in different parts of structures required for proper completion of work including cost of all materials and scaffolding, labour ,T.&P. etc. |
| 32 | Laying C.C- A 40 M10 in foundation of all structures with Cement (O.P.C.,43 grade. course sand of F.M. not less than 2.0 and hard stone ballest (20-40mm size) including lead up to 60.0 m.lift up to 3.0 m. mechanical mixing & mechanical vibration but excluding cost of Centering and shuttering required for proper completion of work including cost of all material T.&P. etc. |
| 33 | Laying R.C.C- A 20 M-20 with Cement (O.P.C.,43 grade). course sand of F.M. not less than 2.5 and crushed stone grit of size 4.75mm to 20mm including lead up to 60.0 m.lift up to 3.0 m. mechanical mixing & mechanical vibration but excluding cost of Centering and shuttering required for proper completion of work including cost of all material T.&P.,labour etc. |
| 34 | Laying R.C.C. A 20 M-25 grade design mix concrete with Cemerit (OPC. 43 grade) course sand of F.M. not less than 2.5, crushed stone grit of size 4.75mm to 20mm and super plasticiser of required 10 make including lead up to 60.0 m.lift up to 3.0 m. mechanical mixing & mechanical vibration but excluding cost of Centering and shuttering required for proper completion of work including cost of all material T&P labour etc |
| 35 | Cutting, Bending, Binding and placing TMT steel bars for reinforcement with cost of binding wire in all structures of rapti main canal required for proper completion of work including cost of all material,labour T.&P. etc. |
| 36 | Dewatering with all cost of power POL machine pump, well point system & operator with assembling & dismantling of equipment etc |
| 37 | Brickwork in 1:4 Cement Mortar with machinary and T&P required for proper completion of Work including cost of all materials and scaffolding, labour etc. |
| 38 | 12 mm Cement plaster in 1:4 Cement Mortar with machinary and T&P required for proper completion of Work including cost of all materials and scaffolding, labour etc. |
| 39 | Supplying and fixing 100 mm dia CPVC pipe for weep hole including cost of all material, labour, and T&P etc. |
| 40 | Providing and fixing MS items for outlet pipes, girder, gates, stairs etc of required shape & size including gas cutting to required size, rolling, tack welding, assembling, labour etc. required for proper completion of works complete in all respect |
| 41 | Providing and fixing G.I. chain link fabric fencing of Required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 42 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal , including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer- in charge. |
| 43 | Supply, installation, testing & commissioning, of 4 nos each of 5 Cusec 25 m (50HP each), Pumping plant including Horizontal Dry Motor Submerged Monoblock Pump Set , with IP68 submerged dry motor and VPI windings. The Impeller mounted directly onto the Extended Solid Motor Shaft Compact Unitary construction. With Casing - 2% NICI FG 260 :IS210, Motor Casing and Other parts - CI FG 260 :IS210, Mech Seal (Motor Side) – SiC V/s SiC (MGI), Mech Seal (Pumpside) - SiC V/s SiC, Impeller – SS CF8M-SS316, Mono Shaft – SS410, Liquid exposed Fastners – SS304(A2), Suction Stainer – SS202, Column/Delivery Pipe - MS with motors, starter, panel ,cable complete in all respect with all required material T&P labour etc (3+1 standby) |
| 44 | Priming & distempering of Wall including cost of all labour, material T&P etc required for proper completion of work. |
| 45 | Priming and Painting of Steel Surfaces including cost of all labour, material T&P etc required for proper completion of work. |
| 46 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 47 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface even and smooth surface including all cost of material T&P for proper completion of work |
| 48 | Providing and fixing glazing in aluminium window with glass panels of 4.00mm thickness and rubber etc complete as per the direction of engineer in charge for completion of work |
| 49 | Boring with 15cm dia casing pipe including lowering and extraction of assembly loading unloading and carriage as per direction of engineer in charge. |
| 50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 52 | SITC of 2 HP pump with motor, starter, panel, cable complete in all respect with all required material, T&P, labour etc. |
| 53 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 54 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 55 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 56 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. a |
| 57 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as require |
| 58 | Earthing with copper plate 600mm x 600m x 3mm thick including accessories, and providing masonry enclosure with copper plate having locking arrangement and watering pipe of 2.7m long etc with charcoal/coke and salt as required. |
| 59 | Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxand earthing the po |
| 60 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required |
| 61 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover o |
| 62 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required. (upto 450mm sweep) |
| 63 | P/F Indian type white glazed earthen wire 1” Quality ISI marked W.C. pan size 580mm Indian make of approved quality including cost of all material. |
| 64 | P/F 10 lit. low level flushing cistern (white vitreous china clay) of standard approved make complete with all accessories and fitting. |
| 65 | P/F 100mm size ‘P’ or ‘S’ trap for water closed squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 Cement: 1 Fine sand) |
| 66 | P/F wash basin with single hole/number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole & making good the same but excluding fittings. 630x450mm |
| 67 | P/F pedestal for wash basin complete recessed at the back for the reption of the pipes and fittings. |
| 68 | P/F C.P. Brass waste pipe for sink and wash basin in 32mm dia complete cost of all materials, labour T&P etc. |
| 69 | P/F in position 100mm dia C.I. Nahani trap with hinged perforated cover complete with gasket and chaulked joints, including making necessary chases and hole in floor and walls and repairing the same to the original conditional completed. |
| 70 | P/F C.P. Jali for Nahani Trap 100mm dia including cost of all materials. |
| 71 | P/F in position C.P. brass towel rail complete with brackets including making chases in wall and repairing the same in 1:3 CM complete. 600x20mm |
| 72 | Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. Brass screws. |
| 73 | P/F C.P. Brass toilet paper holders including cost of all materials, labours T&P etc. |
| 74 | P/F mirror of following size of approved make with teak wood moulded frame and 6mm thick hard board backing including cost of all material, labour, T&P etc. |
| 75 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 76 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (15 mm nominal bore) |
| 77 | P/F C.P. brass angle valve for cistern, wash basin Gyeser etc. 15mm nominal hole size including cost of all materials, labour T&P etc. |
| 78 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 79 | Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp |
| 80 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support |
| 81 | Providing and fixing 32mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement |
| 82 | Providing and fixing 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement |
| 83 | Providing and fixing 20mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement |
| 84 | P/F sand cast iron spigot & Socket, Soil waste, drainage and ventilating pipes of 100 mm size. |
| 85 | Providing IoT (Internet of Things) system consists of a network of physical \\"things\\" embedded with sensors, software and technology that connect and exchang data with other devices over the internet. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender