Tender For Special Repair Of Cms Road To Btc Digree College Via Atarsand Link Road.
Tender Value
30.45 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
3.04 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pratapgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Cms Road To Btc Digree College Via Atarsand Link Road.
BOQ
| Sl. No. | Item Description |
| 1 | Particulars of works |
| 2 | Construction of Embankment with Material Obtained fromBorrow Pits / Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m,transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 including labour cess (Excluding GST) |
| 3 | Granular Sub-base with Well Graded Material (Table 400.1)/ (A) By Mix in Place Method / Construction of granular subbase by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. / (i) For Grading I Material including Royalty and labour cess (Excluding GST) |
| 4 | WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (A) By Manual Means including Royalty and labour cess (Excluding GST) |
| 5 | WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means, including Royalty and labour cess (Excluding GST) |
| 6 | Brick edging on both sides of the road of first brick class M-150. 8 cm wide and 12 cm deep laid with mud mortar including labour & supply of bricks finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by the engineer-in charge of the work including material, labour and T & P etc for Proper completion of the work. (Excluding GST) |
| 7 | Prime Coat (i) Low porosity Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 (Excluding GST) |
| 8 | Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. (Excluding GST) |
| 9 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case - I By Manual Means (I) Bitumen (S-90), including Royalty and labour cess (Excluding GST) |
| 10 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A. By Manual Means Case - III : Type C (I) Bitumen (S-90), including Royalty and labour cess .(Excluding GST) |
| 11 | Construction of sub grade and earthen shoulders with approved materials obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 As per MORTH Specification No. 3.18, (305) (Excluding GST) |
| 12 | Earth in excavation in ordinery soil for foundation and tranchage lead up to 30M. And lift upto 1.5M. (Excluding GST) |
| 13 | Providing and Laying 40mm. Guage ballast with stone dust Complete. (Excluding GST) |
| 14 | Cement concrete 1:3:6 with 40 mm guage brick ballast fine sand & cement. MORD Specification. 11.4 (I) (Excluding GST) |
| 15 | Supply and Laying of 600 MM HP NP3 into foundation, keeping in to proper alignment, fixing of collar with 1:2 Cement and coarse sand mortar and jute etc. rquired for protect jointing including-putting/shifting of pipes to foundation etc. and all labour T&P, Material, etc. required for proper completion of work. (Excluding GST) |
| 16 | First Class 150 Brick work in 1:4 cement and fine sand of 1.25 FM modulous mortar in foundation and plinth including supply of all materials, labours and T&P etc. required for proper completion of the work. As per MORD specification 11.5 I (600, 1200) (Excluding GST) |
| 17 | Struck pointing in 1:3 (cement & sand mortar) on brick work including supply of all materials, labour and T&P etc. Required for proper completion of the work but with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 F.M. As per MORD specification 12.2 (600) (Excluding GST) |
| 18 | 12mm (1/2) thick plaster 1:4 (cement & sand mortar) over brick work minimum thickness not to be less than 10 mm thick including supply of all materials, labour and T&P etc. rquired for completion of the work. As per MORD specification 12.3 (600) (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender