Tender For Special Repair To Bldg No Np-07/01 To 07/06 Md Accn At F Zone Of Ah Unit And Other Sanctioned Works Under Ge (West) Ferozepur Cantt
Tender Value
49.27 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Np-07/01 To 07/06 Md Accn At F Zone Of Ah Unit And Other Sanctioned Works Under Ge (West) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed. |
| 2 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified. |
| 3 | M&L 15 mm thick rendering of mortar in CM(1:4) with LW + @ 200ml/50Kg or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately |
| 4 | Supply only LW + confirming to relavent IS MAKE : Dr. Fixit of M/s PIDILITE INDSTURIES or equivalent |
| 5 | M & L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete. |
| 6 | S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed. |
| 7 | All as item No 06 here in before but except tiles. |
| 8 | M&L for Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. |
| 9 | M&L For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by forced application including bitumen primer complete all as specified. |
| 10 | M& L two coat of solar reflective bituminous aluminium Paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed. |
| 11 | Taking down cement plaster brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 12 | M&L Rendering/plastering on external surface of the wall of 15mm thick in cement mortar (1:4) on brick wall surfaces, surfaces finished even and fair complete all as specified. |
| 13 | M&L 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 14 | M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified. |
| 15 | &L Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces by roller.complete all as specified and directed. |
| 16 | M&L for applying wall putty of 1mm thick interior/exterior on wall surfaces finished smooth and even Complete all as specified and directed by Engineer in Charge |
| 17 | M & L for complete removal of existing surface and applying two coat of white wash to ceiling complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L Preparation of new plastered surfaces and applying three coats white washing on ceiling surfaces complete all as specified and directed by Engr In Charge. |
| 19 | M&L for newly platered surfaces of internal walls and applying two coat of oil emulsion paint (interior grade) overa a coat of primer by using roller, complete all as specified and as directed. |
| 20 | M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified. |
| 21 | M&L Preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed |
| 22 | M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 23 | M&L Preparation of old wood or wooden based surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint on old painted surfaces all as specified and directed |
| 24 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge. |
| 25 | M & L for Green Marble work 18 to 20 mm thick in steps ,jambs,pillars,cooking platform and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and black types over a 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and directed. |
| 26 | M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 27 | M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified. |
| 28 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 85. |
| 29 | M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 30 | S&F of Glazed Coloured and cereamic tiles in vertical surfaces size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed |
| 31 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc.., but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified. |
| 32 | M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified. |
| 33 | All as per item 30 hereinbefore but using old bricks retrieved from demolition under item 29 hereinbefore including cleaning and removal of mortar from old bricks. |
| 34 | M&L Plain Cement Concrete (1:2:4) type B-1 using 20mm graded stone aggregate min radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including formork complete all as specified. |
| 35 | M&L for form work to chajjas, including edges, complete all as directed by Engr-in-Charge. |
| 36 | M&L for RCC, (1: 1.5 :3 ) type B1 (20 mm graded aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge. |
| 37 | Taking down chowkkats or frames area not exc 1.5 Sqm each( Without taking off shutters from the frames) all as directed. |
| 38 | Ditto all as per above itrem No 37 but exc 1.5 Sqm and not exc 4.0 Sqm |
| 39 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 40 | Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and without glazing bars dovetailed or welded including 10mm dia square guard bars complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. |
| 41 | Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded including 10mm dia square guard bars complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. |
| 42 | M&L Forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified. |
| 43 | S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F 35mm thick second class hard wood plain framed, panelled shutters (two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commencial veneering on both faces. The size of rail and style as per IS:1003 (Part I), Kiln seasoned and chemically pressure treated complete all as specified. |
| 45 | S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat all as specified and as directed. |
| 46 | M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified |
| 47 | S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exc .5 sqm in each pane |
| 48 | S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified. |
| 49 | M&L Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification |
| 50 | M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing. |
| 51 | S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified. |
| 52 | S&F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed. |
| 53 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified. |
| 54 | S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 55 | S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge. |
| 56 | S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge. |
| 57 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete. |
| 58 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 59 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 60 | Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 61 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 62 | Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 63 | S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. Make: Prayag/ polytuf |
| 64 | S&F Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed. |
| 65 | S&F 20mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc as fixed in repairs all as specified. |
| 66 | S&F gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe all as specified and directed. |
| 67 | S & F in repair 125mm dia CP grating doom with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed |
| 68 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified. |
| 69 | Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as directed by Engr-in-Charge. |
| 70 | Removing excavated material as soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed. |
| 71 | M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified. |
| 72 | M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified. |
| 73 | M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore. |
| 74 | M&L Reinforced Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6.Note: Reinforcement will be measured and paid seperately. |
| 75 | M&L for Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified & directed. |
| 76 | Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) |
| 77 | 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes , complete all as specified. |
| 78 | 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 79 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified. |
| 80 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified. |
| 81 | S&F 75mm dia PVC (SWR) bends any radius |
| 82 | S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen or laboratory with plugs washers38/40mm diaa PVC waste pipe and including 38/40mm dia CP waste coupling fixing cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified |
| 83 | Supply & fixed stainless steel plate rack 1.00 mm thick racks of standard qality 900 x 750 x 250mm size in repair including necessary shelves etc complete as fixed repairs and all as specified and directed as approved by the Engr-in-Charge |
| 84 | S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed. |
| 85 | S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed. |
| 86 | S & F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair. |
| 87 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified. |
| 88 | S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified. |
| 89 | Supply & Fixed 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs and all as specified and directed by Engineer-In-Charge. |
| 90 | S & F in repair 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule complete all as specified. |
| 91 | S&F in repairs 15mm bore pillar tap,fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, |
| 92 | S&F in repair 15mm bore fancy type chromium plated Stop cock cast copper alloy screwed down, high pressure screwed both ends for iron pipe or union as fixed in repairs complete all as specified. |
| 93 | S&F in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union. |
| 94 | S&F towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and directed. |
| 95 | Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 96 | Providing and laying 60mm thick factory made chamfered edge coloured cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 97 | M&L for Hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified |
| 98 | Demolition of un-reinforced cement concrete in any position complete all as specified. |
| 99 | Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, sub base etc 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified. |
| 100 | Dismantling of steel work including doors ,gates but excluding framed truss etc complete all as spd and directed |
| 101 | S&F mild steel Fe 410 -W(Gde E-250 quality Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 102 | Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed. |
| 103 | S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 104 | Dismantling of boarding of any description and in any position complete all as specified. |
| 105 | Supply and fixing in repairs 18mm thick Celuka plywood of grade 1 quality one side prelaminated and otherside plain wihite colour to make kitchen cabinet/drawer/cub board shutters complete all as directed by Engieer-in-Charge. Make: Rajshree/Century/GREEN PLY/KIT PLY. |
| 106 | Supply and fixing in repairs 18mm thick Celuka plywood of grade 1 Quality, both side prelaminated plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as directed by Engineer-in-Charge. Make: Rajshree/Century/GREEN PLY/KIT PLY |
| 107 | Supply and fixing auto closing hinges 35 mm of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 108 | Supply and fixing Ball bearing runners 45mm Telescopic, full extension load capacity 50 Kgs, Complete all as directed by Engineer-in-Charge. |
| 109 | Supply and fix stainless steel handles 100mm size for kitchen cabinet shutters complete all as directed by Engineer-in-Charge. |
| 110 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. |
| 111 | Material & labour for point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLSH cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note:- Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respect items (a) Fan point/ exhaust fan point /one light point/bell/buzzer controlled by one switch/bell push. |
| 112 | (b) One socket outlet on the same board controlled by one single pole one way switch |
| 113 | (c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch. |
| 114 | All as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete. |
| 115 | S & F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand |
| 116 | S & F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand |
| 117 | S & F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand |
| 118 | S & F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make - Precision/Anchor/Havells/Legrand |
| 119 | Supply and fixing modular Dummy plate complete all as specified and directed. |
| 120 | S & F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand |
| 121 | S & F Modular bell push piano flush type 6 Amps 1 module duly ISI marked. |
| 122 | Supply & Fixing bell ding dong type AC 230 Volt single pole. |
| 123 | S & F in repair Modular white cover plate including GI box inner, 2 module complete all as per specified & directed. Make : Precision/Anchor/Havells/Legrand |
| 124 | S & F in repair Modular white cover plate including GI box inner, 3 module complete all as per specified & directed. Make : Precision/Anchor/Havells/Legrand |
| 125 | S & F in repair Modular white cover plate including GI box inner, 4 modulecomplete all as per specified & directed. Make : Precision/Anchor/Havells/Legrand |
| 126 | S & F in repair Modular white cover plate including modular metal flush box, 6 modulecomplete all as per specified & directed. Make : Precision/Anchor/Havells/Legrand |
| 127 | S & F in repair Modular white cover plate including GI box inner, 8 module complete all as per specified &directed. Make : Precision/Anchor/Havells/Legrand |
| 128 | Supply & Fixing ceiling rose, PVC/Polycarbonate,isolated three terminals. |
| 129 | Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed. |
| 130 | Cutting hole for exhaust fan 300mm |
| 131 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified. |
| 132 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m |
| 133 | S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips |
| 134 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified. |
| 136 | Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 3 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 137 | Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 138 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning SPN 32 AMP |
| 139 | Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed. |
| 140 | Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length). |
| 141 | M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run) |
| 142 | Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified |
| 143 | S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed. |
| 144 | S&F MCB SP, 40 Amps, 240 volts, \\"B\\" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified |
| 145 | Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) |
| 146 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. |
| 147 | Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and as directed. |
| 148 | Returning, filling, including spreading, levelling, watering and well ramming in layrs not exc. 25cmin soft/loose soil complete all as specified and as directed. |
| 149 | Removing surplus soil to a distance not exceeding 50m and dpositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed. |
| 150 | M&L for sand filling under floors, foundation or cable protection including spreding leveling in layer not exc 25cm thick. |
| 151 | M & L Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable. |
| 152 | S&F Galvanized steel tube 40 mm dia light grade For protection of cable complete all as specified and as directed |
| 153 | M &L for Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC concealed conduit /surface conduit with all accessories if require such as bends, reducers, spacers, saddles, junction boxes, Bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holder and light fittings etc) and MS pressed steel/cast iron sunken boxes( minimum thickness 1.2mm) of suitable size for mounting switches/bell pushes/sockets/fan regulator etc covered with new 3 mm thick laminated Bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch 6 Amp. |
| 154 | (b) One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch 6A. |
| 155 | (c) One 5/6 Amp socket outlet independent controlled by one single pole 6 Amp switch. |
| 156 | All as per Item No 153 mentioned here-in-before but one three pin 6/16 Amps socket outlet on the independent board with 2.5 Sqmm PVC insulated copper conductor and 2.5 sqmm copper conductor for continuous earthing complete. |
| 157 | All as per item No 153 above but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed.(a) One light point/fan/bell point controlled by one single pole one way switch 6 Amp. |
| 158 | (b) One light point controlled by two 2-way switches 6 A, with cables 1.5 sq. mm size |
| 159 | (c) One 6 Amps socket outlet independent controlled by one single pole 6 Amp switch. |
| 160 | S &F new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code.(a) 8\\" x 5\\" and Suitable for Main switch board |
| 161 | (c) All as per item No 160 but of size 5\\"x5\\" and Suitable for 05 Amp Independent board. |
| 162 | S & F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only serviceable switchs/socket by making slots on new sheet complete all as specified & directed (a) Min size 8'' x 5\\" and Suitable for 15 Amp Independent board. |
| 163 | (c) All as per item No 162 but of Min size 5'' x 5\\" and Suitable for 05 Amp Independent board. |
| 164 | S & F Switch piano flush type 6 Amps, one way complete all as specified and directed. |
| 165 | S & F Switch piano flush type 16 Amps, one way complete all as specified and directed. |
| 166 | S & F Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed. |
| 167 | S & F Socket outlet, 2 in 1, 6 pin 6 and 16 Amps piano flush type complete all as specified and directed. |
| 168 | S & F Switch piano flush type 6 Amps, two way complete all as specified and directed. |
| 169 | S & F in lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 9 W LED bulb complete all as specified. |
| 170 | S & F in repair stepped type electronic fan regulater (Socket/switch type), flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed |
| 171 | S & F in repair bell push piano flush type 6 Amps single pole complete all as specified and directed. |
| 172 | S & F in repair bell AC 230 volts single pole complete all as specified and directed. |
| 173 | S&F in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 174 | S&F in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified. |
| 175 | S&F in repair LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips |
| 176 | Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz complete all as specified and directed. Note: The cost of fixing of geysers including Non return valve/stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted.Make : Havells Puro Nu cat part No- GHWAPPTWH025/Crompton or any equivalent |
| 177 | Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 50 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz complete all as specified and directed. Note: The cost of fixing of geysers including Non return valve/stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted.Make : Havells Puro Nu cat part No- GHWAPPTWH025/Crompton or any equivalent |
| 178 | M&L for GI Tubes, ' medium grade' galvanised, with all fitting and fixed complete to walls and ceiling or laid in floor of 15 mm bore dia with clamps & bolts as required complete alll as specified and directed. |
| 179 | Supply & fixing for gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed. of size 15 mm |
| 180 | Supply and fixing PVC connection 15 mm size with brass nuts of length 450 mm for Hot/ Cold water supply complete all as specified and directed. |
| 181 | Supply & fixing for Bib tap cast copper alloy with crutch or butterfly handle,fancy type Chromium plated ,screwed down, screwed for iron pipe or for brass ferrule and fixed of 15 mm dia complete all as specified for connection of hot water supply. |
| 182 | M&L cutting existing steel tubing for alteration or additions (each cut measured) and make the connection for gaysers by insertion of tee, band etc. for 15 mm bore pipe complete all as specified and directed Note: cost of fitting/fixtures for making connection are deemed to be included. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender