Tender For Special Repair To Single Officer Accn Bldg No P-08(01 To 07) At Thimaya Enclave Under Ge Basoli.
Tender Value
41.66 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
12 days left
EMD
83320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Single Officer Accn Bldg No P-08(01 To 07) At Thimaya Enclave Under Ge Basoli.
BOQ
| Sl. No. | Item Description |
| 1 | M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in slabs/shelves, supported on walls, beam and columns in floors and in shelves and the like including formwork any discriptioncomplete all as specified and directed. |
| 2 | M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in chajja and the like including formwork any discription complete all as specified and directed. |
| 3 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 4 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 6 | S&F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other Frames/chaukhat size 65 x125 mm with MS hold fast/ lugs/SS dash fashteners dia and length ccomplete all as specified and directed. |
| 7 | S&F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other Frames/chaukhat size 65 x100 mm with MS hold fast/lugs/SS dash fashteners dia and length ccomplete all as specified and directed. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ mm2 ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall, complete all as specified and directed. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 35 mm size comprising of virgin polymer of K value 58-60, calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ mm2, modulas of elasticity 850 n/mm2 and resistance to spred of flame of Class A cateegory with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall, complete all as specified and directed. |
| 11 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid decorative Type wire mesh (skeleton) door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60, (Suspension Grade) calcium carbonate and natural fibre (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge). minimum compressive strenth 50 N/ Sqmm ,modulas of elasticity 850 N/sqmm and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw complete. all as specified and directed. Note :- stainless butt hinges and necessary S.S screws Shall be paid separately. |
| 12 | S&F for 5 mm thick PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly soild board Both side White as wall lining in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work including dismantling old board etc complete all as specified and directed. |
| 13 | M&L for Prelaminated HDHMR board 18-20 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws (min density 10.50 Kg/SQM) complete all as specified and directed . |
| 14 | M&L for Prelaminated HDHMR board 18-20 mm thick as in shutters/shelves (exterior grade, prelaminated) both side balancing white lamination, fixed with screws (min density 10.50 Kg/SQM) complete all as specified and directed . |
| 15 | S&F 18-20 mm Wide PVC exterior grade plain colour banding(edge beading) of min thickness 0.80 mm fixed with adhesive/ jointing complete to edges of boards as in cupboards shelves / drawers/ shutters all around, complete all as specified and directed . |
| 16 | S&F of 304-grade, SS trolley as pull out/plain shelves unit with minimum width x depth x height 17\\" x 20\\"x 8\\" inches) fixed with soft close telescopic s/s channels with min load bearing capacity of 35 kg and Aluminium 'G' type Profile Handle including all other accessories required, complete all as specified and as directed. (Make: Hettich, Hafele, Godrej interio ) |
| 17 | S&F of 304-grade, SS trolley for plate/thalli storage unit with minimum width x depth x height 21\\" x 20\\" x 8\\" inches) fixed with soft close telescopic s/s channels with min load bearing capacity of 35 kg and Aluminium 'G' type Profile Handle incl all other accessories required, complete all as specified and as directed. (Make: Hettich, Hafele, Godrej interio ). |
| 18 | S&F of 304-grade, SS trolley for vegetable/storage unit with minimum width x depth x height 21\\" x 20\\" x 8\\" inches) fixed with soft close telescopic s/s channels with min load bearing capacity of 35 kg and Aluminium 'G' type Profile Handle incl all other accessories required, complete all as specified and as directed. (Make: Hettich, Hafele, Godrej interio ). |
| 19 | S&F of 304-grade, SS Massala pull out storage unit with minimum width x depth x height 08\\" x 20\\" x 21\\" (inches) with three shelves with depth of 20 inches each fixed with soft close telescopic s/s channels with min load bearing capacity of 35 kg and Aluminium 'G' type Profile Handle incl all other accessories required, complete all as specified and as directed. (Make: Hettich, Hafele, Godrej interio ) |
| 20 | M&L for Aluminium 'G' Type Profile Handle 6\\" width for kitchen cabinet/ cupboard complete all as specified and as per sample kept in GE office.Make:-Hettich,Godrej, Harrison . |
| 21 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 22 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 23 | S&F 3 mm thick figured glass sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 24 | S&F in repair Butt hinges of stainless steel medium weight of size 100mm complete all as specified and directed. |
| 25 | S&F in repair Stainless steel handle of size 150 mm long complete all as specified and directed. |
| 26 | S&F in repair Stainless steel barrel tower bolt of extruded section 150 mm long complete all as specified and directed. |
| 27 | S&F in repair Cabinet hinges,Soft Close full Overlay 4 Hole BIFMA Tested, Nickel plated, 105 Opening 18-20mm Thick Panel, cold rolled mild steel, ISI marked complete all as specified and directed. |
| 28 | S&F in repair Stainless steel barrel tower bolt of extruded section 200 mm long complete all as specified and directed. |
| 29 | S&F in repair/new aluminium hanging floor door stopper,Twin rubber stopper,size 100mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed. |
| 30 | S&F 75 mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw,complete all as specified and directed |
| 31 | S&F in repair stainless steel, sliding door bolt with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 32 | S& F in repair mild steel Peg set of six hooks size 50mm to 60mm complete all as specified and directed. |
| 33 | Supply and fixing mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work complete all as specified and directed. |
| 34 | S&F continous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electrogalvanised complete all as specified and directed. |
| 35 | M&L for 50 mm magnetic catchers with brass body and striking plate including letting in as fixed complete all as specified and directed. |
| 36 | S&F Aluminium bottom door seal with brushes, fix with screw, suitable for wooden door complete all as specified and directed. |
| 37 | S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide including taking down of old windows as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed. |
| 38 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed. |
| 39 | M&L for preparation of old wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed . |
| 40 | M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed . |
| 41 | M& for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying a coat of wall care putty 1 mm thick and one coat of primer complete all as specified and directed. |
| 42 | M & L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars, cornices surface including making good uneven surface/holes and smoothening of surface with birla 1mm thick wall care putty coloured in same shade where ever required etc. complete all as specified and directed. |
| 43 | Preparation of new plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion paint (APEX) of Alkali & fungal resistance, dirt resistance qualities in same shade and color as approved over a coat of primer using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) over including one coat of primer over one coats of Birla wall care putty 1 mm thick on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 44 | Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of exterior emulsion paint (APEX) over and including one coat of primer over two coats of Birla wall care putty 1 mm thick on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 45 | Taking down, dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork/scffolding and matching with existing surface of facia (including white wash/ colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed. |
| 46 | M&L for preparation for removal of existing treatment, all loose gravel cement mortar, dirt,oil,grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heat at torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and apply primer with Smart Care Epoxy Primer to seal the pores/cracks and enhance the adhesion of the coating. Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcrd in gacrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability up to 2.5 mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature up to 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness. weave in leno pattern having 45 gsm/ sqm and pasting it properly with over lap of 50 mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm .Apply third and final coat undiluted @ 0.45 ltr/sqm over 20 mm thick plaster in CM 1:4 as specified and as per manufactures specification having warranty for 10 years.Note:- i) Work shall be executed company authorized applicater. |
| 47 | S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 48 | S&F Wire netting of galvanised steel wire 1.40mm dia with 25mm size of mesh fixed with tinned tacks of wire staples or welding with steel farme including taken down old wiremesh complete all as specified and directed. |
| 49 | S&F in Repair/Replacement Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Iincluding dismantling, asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and directed. |
| 50 | Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 51 | M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed. |
| 52 | S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. |
| 53 | S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. |
| 54 | Supply and fix in repair PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center.complete all as specified and directed . |
| 55 | Supply and fix in repair PVC (SWR) pipe 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center.complete all as specified and directed . |
| 56 | S&F PVC (SWR) Bends in any radius 110 mm bore in repair complete all as specified and directed. |
| 57 | S&F PVC (SWR) Bends in any radius 75 mm bore in repair complete all as specified and directed. |
| 58 | S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed. |
| 59 | S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed. |
| 60 | Supply and fixing in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 61 | Supply and fixing in repair PVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore, complete all as specified and directed. |
| 62 | Supply and fixing in repair PVC(SWR), junction single, (double 'T'/'Y') with access door equal or unequal for 75 mm bore, complete all as specified and directed. |
| 63 | S&F PVC (SWR) reducer 110mm bore complete all as specified and directed. |
| 64 | S&F PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed. |
| 65 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 66 | M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical tanks with closed top,specific wt shall be 25 gm/ltr), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm PP-R Gate valves (brass insert) etc including taking down existing tank complete all as specified and directed. |
| 67 | S&F in repair 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed. |
| 68 | Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 69 | S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed. |
| 70 | S&F in repair Corner Glass Shelf (with brass Bracket) complete all as specified and directed. |
| 71 | S&F in repair Glass Shelf Size (12''x 6'') (with brass Bracket) complete all as specified and directed. |
| 72 | S & F in repair Toilet paper holder, with flat recessed type stainess steel complete all as specified and directed . |
| 73 | S&F in repair Fancy type Stainless Steel, soap dish, Size (4''x4'') complete all as specified and directed. |
| 74 | S&F in repair CP towel ring fixed with CP screw and wooden/plastic cleats dish fancy type complete all as specified and directed. |
| 75 | S&F in repair under counter wash basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CP 32mm dia waste coupling and PVC waste pipe complete all as specified and directed. |
| 76 | S&F in repair PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and directed |
| 77 | S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed. |
| 78 | S&F in repair Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, complete all as specified and directed. |
| 79 | Supplying and laying CPVC Pipe outer diameter 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed. |
| 80 | Supplying and laying CPVC Pipe outer diameter 16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed. |
| 81 | Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 82 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick above or below ground level. complete all as specified and directed. |
| 83 | M&L for PCC 1:4:8 type D-2 (using 40 mm graged crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and drected |
| 84 | M&L for cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring complete all as specified and directed. |
| 85 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 86 | M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed. |
| 87 | Dismantling, floor, hearth or wall tiling or stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 88 | M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 89 | Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface (sample as approved & kept in GE's sample room) complete all as specified and directed. |
| 90 | M&L for Vitrified tiles10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 91 | Material and labour Vitrified tiles 10 mm thick (square/rectangular) polished coloured tiles vertical surfaces dado/skirting complete all as specified and directed. |
| 92 | M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 93 | M&L Granite black colour of any type 20 mm thick machine cut as in steps, jambs, pillars, window cills , cooking plateforms & making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed. |
| 94 | M & L for 16 to 18 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick rendering 1:4, grinding and polishing complete all as specified and directed. |
| 95 | Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc. complete all as specified and directed |
| 96 | M&L For pre-polished glazed ENDURA tiles, coloured, 30cm x 30cm x 10cm thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over 15mm thick Screed in 1:4 complete all as specified and directed. |
| 97 | Taking down cement plaster on brick or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 98 | S&F in repair Curtain rod 20mm dia of Stainless steel with including PVC/SS brackets , Stops, rollers etc. Complete all as specified and directed. |
| 99 | S&F in repair 15mm bore angle valve with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and directed. |
| 100 | S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 101 | S&F in repair 15 mm bore brass CP mixer for mixing hot and cold wash hand basin water screwed down for iron pipe, etc complete all as specified and directed. |
| 102 | S&F in repair 15 mm bore Sink Wall Mixer System Complete. Connecting Legs & Flanges Complete all as specified and directed. |
| 103 | S&F in repair 15 mm bore Wall Mixer 3-in-1 System with Provision for Overhead Shower Complete with 115 mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified and directed. |
| 104 | Demolition of brickwork built in cement mortar including all quions, arches, pillar complete all as specified and directed |
| 105 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6, complete all as specified and directed |
| 106 | All as per item No 107 above, but except brick, complete all as specified and directed |
| 107 | M&L for Preparation of new plastered surface of wall and applying three coat of white wash on the walls, pillars, cornices etc. complete all as specified and directed. |
| 108 | M&L for Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc (upto 2nd storey bldgs) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paper and applying two coat of white wash on the walls, pillars, cornices etc. complete all as specified and directed. |
| 109 | Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed. |
| 110 | M & L for Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4 and external pointed flush in same mortar as the work proceeds. complete all as specified and directed |
| 111 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid water proofing compound complete all as specified and directed |
| 112 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement and preperation of plastered surface and applied two coats of cement base paint over one coat of primer complete all as specified and directed |
| 113 | M&L Plain Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed. |
| 114 | M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling and applying three coats of white wash on ceiling complete all as specified and directed |
| 115 | Supply only Liquid Water Proofing Compound. complete all as specified and directed |
| 116 | S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (24\\"x30\\"x10\\") fixed with steel fastners or steel screw complete all as specified and directed. |
| 117 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 118 | M&L for 75 mm thick PCC 1:4:8 type B-2, (using 40 mm graded crushed stone aggregate), as in subbase all as specified. |
| 119 | M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment over and including 50mm thick layer of sand filling complete all as specified and directed. |
| 120 | Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of PVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and directed. |
| 121 | Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of PVC underground drainage pipe (UDS) type 'B' 110mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and directed. |
| 122 | M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 all as specified and directed incl necessary form work. Note: Steel reinforcement shall be measured and paid for separately under respective items |
| 123 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required, Internal dia of pipe 150mm complete all as specified. |
| 124 | Suppy and fix gate valve 25mm dia PPR gate valve conforming to IS for PPR pipe complete all as specified and directed. |
| 125 | Supplying and laying CPVC Pipe outer diameter 25 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed. |
| 126 | Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed. |
| 127 | M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 128 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed. |
| 129 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core including taking down existing cable complete all as specified and directed |
| 130 | Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured) |
| 131 | Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed . |
| 132 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. |
| 133 | M&L for Point wiring for one light controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit with sunken box minimum thickness 1.2mm thick suitable for modular switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour complete all as specified and directed. Note : (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green. |
| 134 | All as per item No 133 but controlled by two way switches complete all as per specified and directed. |
| 135 | All as per item No 133 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed. |
| 136 | All as per item No 133 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed. |
| 137 | M&L for Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit with sunken box minimum thickness 1.2mm thick suitable for modular switches and sockets for 5 pin 15 amps socket outlet, including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour complete all as specified and directed. Note : (a) Insulation test of point wiring (b) colour coding is to be maintained (Ph-Red, N-Black, Earth- Green). |
| 138 | S&F in repair/replacement Modular switch one way 6A,1 Module, complete all as specified and directed . |
| 139 | S&F in repair/replacement Modular switch two way 6A,1 Module, complete all as specified and directed . |
| 140 | S&F in repair/replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed . |
| 141 | S&F in repair/replacement Modular switch one way 16A,1 Module, with indicator complete all as specified and directed |
| 142 | S&F modular socket outlet 6/16 amps, 3 Pin combined, 2 module complete all as specified and directed |
| 143 | S&F modular fan step regulator,120 W two module complete all as specified directed. |
| 144 | Supplying&Fixing modular Bell push, 6 amp two module complete all as specifed and directed. |
| 145 | S&F in repair/replacement bell ding dong type, complete all as specified and directed . |
| 146 | S&F modular white cover plate with frame 8 modular complete all as specifed and directed. |
| 147 | S&F modular white cover plate with frame 6 modular complete all as specifed and directed. |
| 148 | S&F modular white cover platewith frame 4 modular complete all as specifed and directed. |
| 149 | S&F modular white cover plate with frame 3 modular complete all as specifed and directed. |
| 150 | S&F modular white cover plate with frame 2 modular complete all as specifed and directed. |
| 151 | Supply and fixing 9 W LED lamp complete all as specified and directed . |
| 152 | S & F lamp holder/batton holder/Angle holder insulated body (metal ring) with bakelite type with back plate suitable for batten fitting complete all as specified and directed. |
| 153 | S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed. |
| 154 | Supply and fixing LED lights fitting of 20W, 220 volt AC, Surface mounting for General Purpose and Extruded Aluminium housing alongwith driver, holder, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 155 | Supply and fixing Bed side lamp 9 watt fixed on wall with LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . |
| 156 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) copper wound complete all as specified and directed. |
| 157 | Supply,fixing & testing Horizontal/cubical Type water BEE 5.00 Star heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug including PVC connections, anti vacum system, built in pressure release valve,thermostat, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters and making good disturbed surface complete all as specified and directed. |
| 158 | M&L for invertor point wiring with 1.5 sqmm size cable in each room complete all as specified. |
| 159 | M&L for TPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 160 | Disconnecting of smart electric meter before start of work on site (any nature) and re-connect after completion of work as per existing througt authorised vendor with software updation complete all as specified and directed. |
| 161 | S&F LED Bldg security lights of 35 Watt. 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl Gl bracket 1.5 mtr long of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 162 | S&F MCB SP 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed. |
| 163 | S&F MCB SPN 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed. |
| 164 | S&F in replacement double door TPN vertical loadline DBs are fitted with Bus bars, neutrallinks, Blanking plate with MCCB four pole, 100Amps, 25KA, 415volts supply having protection IP-43, G Frame fitting on wall with anchor fastener and doing all electrical connection icomplete all as per specified and directed. |
| 165 | M & L for providing/cutting the round /square hole on the wall and supply and fixing propeller type AC ventilating fans(Metalic body ) Single phase , 230 volts 300 mm sweep including grouting and fixing the ragged bolts in wall for exhaust fan and louver shutter on the exhaust side wall (outer surface of the wall ) and connecting PVC insulated three core 1.5 SQMM copper cable from ceiling rose to exhaust fan motor and writing MES No with black synthetic enemel paint 2.0 cm high. complete all as specified and directed . |
| 166 | S&F sub main wiring with four run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Four run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. |
| 167 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender