Tender For Addition/Alteration Of Otm Accn Bldg No. T-141 And Provn Of 15 Geysers In Jcos/Or Single Accomodation At Madhopur
Tender Value
9.17 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
18340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration Of Otm Accn Bldg No. T-141 And Provn Of 15 Geysers In Jcos/Or Single Accomodation At Madhopur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe etc and getting out in any type of soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed. |
| 3 | Removing excavated material to a distance nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified and directed. |
| 4 | Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed. |
| 5 | Dismantling of ceiling asbestos cement board any thickness including cover fillets complete all as specified and directed. |
| 6 | Demolition of brickwork/concrete block work or stone/boulder masonary, built in cement mortar including all quions, arches, pillar complete all as specified and directed |
| 7 | Taking down cement plaster on brick wall/stone wall or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 8 | Taking down steel window & ventilator with wire mesh/glazed shutter (without taking of shutter from frame) area n.exc 1.5Sqm each complete all as specified and directed. |
| 9 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 10 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed . |
| 11 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed . |
| 12 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4, complete all as specified and directed |
| 13 | All as per Sr Item No-09 here-in-before but except bricks. |
| 14 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 1mm thick wall care putty, one coat of primer and two coat oil emulsion distemper on walls complete all as specified and directed. |
| 16 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 17 | S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc incl 2 coat of synthetic enamel paint over a coat of red oxide complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats complete all as specified and directed. |
| 18 | M&L Box type steel windows and ventilator comprising of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter using stainless steel grade 304 wire gauge with wire of dia 0.5mm and average width of aperture 1.4mm in both directions & glass glazed shutter (wire cloth and glass panes shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 19 | Supply and fix Galvanised iron wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 20 | S&F 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 21 | S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed. |
| 22 | S&F aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified and directed. |
| 23 | S&F aluminium anodised barrel tower bolts of 200 mm long of extruded section fixed with stainless steel screws, ISI marked, complete all as specified and directed. |
| 24 | S&F aluminium alloy, anodised, sliding door with hasp and size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 25 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 26 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:6, including demolition of tiles of any description or thickness in floors, aprons etc complete all as specified and directed . |
| 27 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Rendering r 10 mm thick in CM 1:4, including demolition of tiles of any description or thickness complete all as specified and directed . |
| 28 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips. complete all as specified and directed |
| 29 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 30 | M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed . |
| 31 | S&F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle, channel, flat section) including distance pieces, cleat etc complete all as specified and directed. |
| 32 | Dismantling structural steel work of any description, any size complete all as specified and directed. |
| 33 | Erection & Fixing only Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc,and applying two coats of synthetic enamel paint complete all as specified and directed.. |
| 34 | S&F curtain rails 20mm, anodised aluminium alloy tubular with fixing brackets,end bulbs, fancy type, stop etc. complete all as specified and directed. |
| 35 | M&L for Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed . |
| 36 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. |
| 37 | M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green) |
| 38 | All as per item No 37 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed. |
| 39 | All as per item No 37 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed. |
| 40 | M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black,Earth- Green) |
| 41 | S & F for switch piano flush type one way 5 amps 230volts SP complete all as specified and directed. |
| 42 | S & F socket outlet 5 pin 5 amps 230volts flush type complete all as specified and directed. |
| 43 | S & F for switch piano flush type one way 15 amps 230volts SP complete all as specified and directed. |
| 44 | S & F socket outlet 6 pin, 5 and 15 amps multipurpose 230V flush type complete all as specified and directed. |
| 45 | S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed. |
| 46 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 47 | Supply and fix LED Bulb 9W complete all as specified and directed. |
| 48 | S & F lamp holder/batton holder/angle holder insulated body(Metal ring) with bakelite back plate suitable for batten fittings including 9 watts LED Lamp 6500 K complete all as specified and directed. |
| 49 | Supply and fixing ceiling fans complete with blades, down rods, fan remote and accessories, 230 V, 1200 mm sweep. Min air delivery 215 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) copper wound complete all as specified and directed. |
| 50 | S&F of LED Bldg security lights of 35 Watt, 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl Gl bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable. complete all as specified and directed. |
| 51 | M&L for SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 52 | S&F MCB SPN 32 Amps 240 volt with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed. |
| 53 | S&F MCB SP 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed. |
| 54 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire) |
| 55 | Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/and including all fitting as required complete all as specified and directed. |
| 56 | Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm, 2 core complete all as specified and directed .Note : Earth work including excavation, returning filling, removing, DWC pipe covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule. |
| 57 | Supply,fixing& testing Horizontal/cubical Type water heater BEE 5.00 Star storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in pressure release valve, thermostat, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including with suitabale brackets, nut and bolts and making good disturbed surface complete all as specified and directed. |
| 58 | S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 2.5 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 2.5 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit 1.8mm wall thick, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 2.5 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 2.5 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. |
| 59 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed. |
| 60 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 61 | S&F 15mm bore chromium plated cast copper alloy stop valves, screwed down,high pressure, fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed. |
| 62 | S&F 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender