Tender For Conversion Of Ground Floor Class Rooms Of The Upper Primary School Into A Dialysis Unit At Kalpeni (Re Tender-Ii)
Tender Value
37.32 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
74643
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Ground Floor Class Rooms Of The Upper Primary School Into A Dialysis Unit At Kalpeni (Re Tender-Ii)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. |
| 2 | Providing and laying cement concrete 1:4:8 (1..cement:4.M.Sand:8.granite chips ) foundation and plinth.Stone aggregate 40mm nomonal size |
| 3 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frame |
| 4 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames |
| 5 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm |
| 6 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar1:4 |
| 7 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250 x16mm |
| 8 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200 x16mm |
| 9 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 100 x16mm |
| 10 | Providing and laying vitrifiedtiles in floor with diffrent sizes (thickness to be specified by the manufacture) with water absorbtion lessthan0.08% and confirming to IS:15622 of approved brand and manufacture, in all coulers and shades, laid with cement based high polymer modifeid quick settile adhesive (water based).(Khajaria polished vitrified tiles or equivalent). Size of tiles 600 x 1200 mm. |
| 11 | Providing and laying vitrified tiles in diffrent sizes (thicknessto be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all coulers and shades, in skirting , riser of steps, laid with cement based high polymer modifeid quick set tile adhesive (water based ) (Khajaria polishedvitrified tiles or equivalent). Size of tiles 600 x 1200 mm |
| 12 | Providing and fixing white vitrous China water closet Pedestal pan (European) typeWC pans with white plastic seat and lid and rubber buffers, 15white vitrous China low level flushing system of approved make with fitting sand brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid |
| 13 | Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required |
| 14 | Providing and fixing white vitrous China kitchen sink with CI brackets painted white, 15mmC.P bras pillar tap and C.P brass chain and rubber plug 40mm brass waste of standrad pattern 40mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White gazed fire clay kitchen sink size 600x450x250mm |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 20 mm nominal outer dia .Pipes. |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 32 mm nominal outer dia .Pipes. |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) 20 mm nominal outer dia .Pipes. |
| 18 | Providing and fixing C.P.Brass bib cock of approved quality coforming to IS:8931.15 mm nominal bore |
| 19 | Providingand fixing C.P. Brass stopcock (concealed) of standard design and of approved quality coforming to IS:8931.15 mm nominal bore |
| 20 | Providingand fixing C.P. Brass Doctors bib cock of standard design and of approved quality. 15 mm nominal bore |
| 21 | Providing and fixing ball valve (PVC) of approved quality and manufacture complete. 32 mm nominal bore |
| 22 | Providing and fixing ball valve (PVC) of approved quality and manufacture complete. 25 mm nominal bore |
| 23 | Providing and fixing C.P.Brass angle valve for basin mixer and geyser points of approved quality coforming to IS :8931. 15 mm nominal bore |
| 24 | Providing and fixing CP brass Sink cock of approved quality and manufacture complete. 20 mm |
| 25 | Providing and fixing Stailess steel AISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls where required. Kitchen sink with drain board 510 x 1040 mm bowl deth 250 mm |
| 26 | Providing and fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. |
| 27 | Providing and laying cement concrete 1:2:4 (1.cement: 2.M.Sand: 4..granite chips 20 mm nomoinal size) foundation and plinth. |
| 28 | Reinforced cement concrete work in beams,Suspended floors, roofs, having slope upto15 degree landings, shelves chajjas,lintels ,bands, plain window sills, staircase and spiral staircase up to floor five level excluding cost of centering and shuttering finishing and reinforcement with 1:1.5:3 (1cemet:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size ) |
| 29 | Providing and fixing precast cement concrete 1:2:4 (1.cement: 2.M.Sand: 4.graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1.cement :2.fine sand) and finished smooth with 6mm thick cement plaster1:3 (1.cement: 3.fine sand) on exposed surfaces including centering and shuttering in String courses, copings, bed plates anchor blocks, plain window sills and the like |
| 30 | Cold twisted steel reinforcement for R.C.C.work including bending, binding and placing in position complete. |
| 31 | Centring and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 32 | Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx15cm. |
| 33 | Cement concrete block (machine moulded) masonry in Superstructure above plinth level in CM 1:6 with blocks of size 40cmx20cmx15cm |
| 34 | 15mm cement plaster1:6 (1.cement :6.metal sand) on rough side of single or half brick wall |
| 35 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per rchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :for fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 36 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPD Mrubber/ neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) : |
| 37 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade1 TypeII in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminatedparticle board with decorative lamination on both sides. |
| 38 | Providing and fixing glazing in aluminium door,window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness |
| 39 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality asper architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 40 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 41 | Providing and fixing aluminium casement windows fastener of required lengthor aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium. |
| 42 | Providing and fixing aluminium round shape handle of outer dia100mm with SS screws etc. Complete asper direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium. |
| 43 | Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws . |
| 44 | Providing and fixing Bright finished brass Hydraulic door closer with necessary fittings &screws |
| 45 | Providing and fixing health faucet of approved quality and manufacture complete. |
| 46 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 47 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats onold work. |
| 48 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flangc ompression type fittings including trenching and re filling etc. External work. 32 mm nominal bore |
| 49 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flangc ompression type fittings including trenching and re filling etc. External work. 63 mm nominal bore |
| 50 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flangc ompression type fittings including trenching and re filling etc. External work. 110 mm nominal bore |
| 51 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanitycounters ,window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar1:4 (1.cement:4.metal sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm |
| 52 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/ Granite/ stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. |
| 53 | Providing and fixing 100 mm PVC grating for gully trap. |
| 54 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 55 | Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600mm long towel rail brackets with total length of 645mm,width 78mm and effective height of 88mm, weighing not less than190 gms. |
| 56 | Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P.brass screws and wooden plugs, etc. wherever necessary complete : 20 mm dia |
| 57 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50metres lead asper direction of Engineer in charge. 1:3:6 or richer mix |
| 58 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead asper direction of Engineer-in-charge. In Cement mortar |
| 59 | Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of Engineer - in- charge. |
| 60 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc.complete and stacking within 50metres lead Of area 3sqm and below |
| 61 | Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metre and below |
| 62 | Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primerusin’gstructural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 63 | Finishing with Epoxy paint (two or more coats) at alllocations prepred and applied as per manufacture's specifications including appropriate priming coat, preperations of surface, etc.. Complete on steel works. |
| 64 | Providing and fixing16mm M.S. Fan clamps of standard shape and size in existing R.C.C.slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete |
| 65 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface toprepare the surface even and smooth complete. (Birla White or equivalent). |
| 66 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tiles 1200x600 mm |
| 67 | Providing and placing sintex tank on terrace (at floor level ) polythene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and the base support for tank. 5000 liter capacity |
| 68 | Providing and placing sintex tank on terrace (at floor level ) polythene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and the base support for tank. 500 liter capacity |
| 69 | Procurement & Supply of 1.5T Inverter type split air conditioners (wall mounted) of CARRIER, SAMSUNG, BLUESTAR, VOLTAS make 5 star rating, fully copper coil, and dual rotor inverter with acoustic jacket along with manufacturer’s warranty not less than one year with LCD function remote control including night glow function on remote button, memory restart ,Turbo cooling ,Dehumidifying,Automatic 4D swing,air purification by cold plasma or equivalent technology suitable for operation on 230V,50Hz single phaseAC power supply including outdoor mounting brackets and a voltage stabilizer 4KVA(V-Guard preferably). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender