Tender For Proposed Development In Various Open Spaces In Prabhag 11 Under Hindu Hriday Samrat Balasaheb Thackeray Lok Kalyan Abhiyan At Sinnar, Tal- Sinnar, Dist- Nashik
Tender Value
84.27 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
16 days left
EMD
8.42 Lakhs
Bank guarantee accepted
Document Fee
8400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Development In Various Open Spaces In Prabhag 11 Under Hindu Hriday Samrat Balasaheb Thackeray Lok Kalyan Abhiyan At Sinnar, Tal- Sinnar, Dist- Nashik
BOQ
| Sl. No. | Item Description |
| 1 | (A) WOMENS TOILET AND PHC.Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 2 | (A) WOMENS TOILET AND PHC.Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 3 | (A) WOMENS TOILET AND PHC.Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | (A) WOMENS TOILET AND PHC.Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | (A) WOMENS TOILET AND PHC.Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | (A) WOMENS TOILET AND PHC.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | (A) WOMENS TOILET AND PHC.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | (A) WOMENS TOILET AND PHC.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | (A) WOMENS TOILET AND PHC.Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 10 | (A) WOMENS TOILET AND PHC.Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 11 | (A) WOMENS TOILET AND PHC.Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 12 | (A) WOMENS TOILET AND PHC.Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 13 | (A) WOMENS TOILET AND PHC.Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 14 | (A) WOMENS TOILET AND PHC.Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge) |
| 15 | (A) WOMENS TOILET AND PHC.Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 16 | (A) WOMENS TOILET AND PHC.Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 17 | (A) WOMENS TOILET AND PHC.Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 18 | (A) WOMENS TOILET AND PHC.Providing and applying 2 Coats of high quality acrylic copolymer matt approved low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. |
| 19 | (A) WOMENS TOILET AND PHC.Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. M : As directed by Engineer-in-charge. |
| 20 | (A) WOMENS TOILET AND PHC.Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 21 | (A) WOMENS TOILET AND PHC.Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 22 | (A) WOMENS TOILET AND PHC.Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete |
| 23 | (A) WOMENS TOILET AND PHC.Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 24 | (A) WOMENS TOILET AND PHC.Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 25 | (A) WOMENS TOILET AND PHC.Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite |
| 26 | (A) WOMENS TOILET AND PHC.Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 27 | (A) WOMENS TOILET AND PHC.Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. |
| 28 | (A) WOMENS TOILET AND PHC.Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 29 | (A) WOMENS TOILET AND PHC.Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. |
| 30 | (A) WOMENS TOILET AND PHC.Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 31 | (A) WOMENS TOILET AND PHC.Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) |
| 32 | (A) WOMENS TOILET AND PHC.Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 33 | (A) WOMENS TOILET AND PHC.Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | (A) WOMENS TOILET AND PHC.Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 35 | (A) WOMENS TOILET AND PHC.Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 36 | (A) WOMENS TOILET AND PHC.Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 37 | (A) WOMENS TOILET AND PHC.Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and M ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 38 | (A) WOMENS TOILET AND PHC.Providing and fixing in position various capacity rainwater harvesting dual intensity auto flush open ended at drain outlet filter with working principal of COHESSIVE AND CENTRIFUGAL FORCE having filter element made out of S.S. 304 screen with mesh size of 205 microns having rainfall capacity of 75 m/hr intensity with operating pressure of 0.060Kilogramper sq.cm. of Head with discharge capacity ranging from 10 to 480 lit/min including all necessary accessories like coupler,bends,PVC valve,etc fixing with Bombay nails of required length etc. complete with inlet size of 90 mm to 110 mm diameter from rooftop pipe with drain outlet of 90 mm to 110 mm diameter size with clean water outlet of 62 mm to 90 mm diameter size including fitting and fixing excluding inlet and outlet piping etc complete as per the direction by engineer in charge. |
| 39 | (A) WOMENS TOILET AND PHC.FL-150 for the catchment up to 150 sq.m. system size 90 mm diameter inlet, 75 mm diameter clean water outlet, 90 mm diameter drain outlet (filterain,tee,door bend, valve 63mm) |
| 40 | (A) WOMENS TOILET AND PHC.RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge |
| 41 | (A) WOMENS TOILET AND PHC.Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc. complete. |
| 42 | (A) WOMENS TOILET AND PHC.Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 43 | (A) WOMENS TOILET AND PHC.Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (AntiCorossive Paint) |
| 44 | (A) WOMENS TOILET AND PHC.12\\"SS Handle: (For 2 Hr fire Rated 12\\"SS Handle) Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy & Magnum etc.)as per direction of Eingineer -in Charge fitted and fixed complete including all taxes & incidental charges. |
| 45 | (A) WOMENS TOILET AND PHC.Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 46 | (A) WOMENS TOILET AND PHC.Medium Height Steel Storage @ 750Lx450Dx1200HTProviding and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. |
| 47 | (A) WOMENS TOILET AND PHC.Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 48 | (A) WOMENS TOILET AND PHC.**Providing, supplying, installing, testing and commissioning of automatic sanitary napkin vending machine**, wall mounted type, suitable for dispensing individually packed sanitary napkins, having minimum 50 Nos. storage capacity, with electrically operated automatic dispensing mechanism, push button/coin or token operated system, front loading arrangement, transparent inspection window, stock indication, anti-corrosive powder-coated MS/SS cabinet, spring/spiral type vending mechanism suitable for standard folded sanitary napkins, complete with electrical accessories, power adaptor/SMPS, mounting brackets, fasteners and all other necessary accessories, including transportation, installation, testing and commissioning, complete as directed by Engineer-in-Charge.**Unit: Each (No.)** |
| 49 | (A) WOMENS TOILET AND PHC.**Providing and fixing electrically operated sanitary napkin incinerator with smoke control unit**, having insulated combustion chamber with minimum 3 mm thick M.S./SS sheet, high density ceramic fibre/ceramic board thermal insulation, electrically operated heating system capable of achieving minimum 800°C temperature, automatic digital temperature and time control with temperature indicator and overheating auto cut-off, insulated door, ash collection arrangement and suitable exhaust outlet connected to smoke control unit for effective control of smoke, fumes and odour, with powder coated M.S./CRCA or SS external body, complete with heating element, temperature sensor, control panel, MCB, electrical wiring, power cord, exhaust/flue pipe, mounting stand/brackets, fasteners and all necessary accessories, including transportation, unloading, installation, testing and commissioning, complete as directed by Engineer-in-Charge.**Capacity:** Minimum 100 sanitary napkins per day and minimum 10 napkins per cycle.**Unit: Each (No.)** |
| 50 | (A) WOMENS TOILET AND PHC.Portable Office Container (Bunk House)Providing, fabricating and installing prefabricated portable office cabin of size approx. 30’x10’X8.5', made of steel structure, including doors, windows, electrical wiring, lighting, fan points, painting, and all necessary fittings complete. |
| 51 | (A) WOMENS TOILET AND PHC.Providing and supplying Foot Operated Pedal Bin for Bio-Medical Waste Collection of 10 litre capacity, made of non-chlorinated PP plastic, with foot operated lid mechanism, complete with inner perforated sieve, MS frame with pedal system, and ergonomically designed handles.The bin shall be leak-proof, reusable, and colour coded, conforming to Bio-Medical Waste Management Rules 2016 and CPCB guidelines, with provision for biohazard marking, complete in all respects |
| 52 | (A) WOMENS TOILET AND PHC.Providing and supplying Medical Oxygen Gas Cylinder (B-Type) made of normalized seamless steel, suitable for storage and supply of compressed medical oxygen gas, having 10 litres water capacity, designed for high pressure service with working pressure up to 150 kg/cm² and test pressure up to 250 kg/cm², complete with ISI marked key-operated valve (Type-B) conforming to IS:3224, including valve protection cap, all fittings leak-proof, cylinder body duly colour coded (Black body with White shoulder) as per standards.The cylinder shall be of approx. 140 mm outer diameter with minimum 4 mm wall thickness, tare weight approx. 14 kg, complete with all required markings engraved on body including serial number, manufacturer code, working pressure, test pressure, water capacity, year of manufacture and testing, etc.The cylinder shall conform to IS:7285 (Part 1) latest, and comply with Gas Cylinder Rules 2016, approved by PESO (Petroleum and Explosives Safety Organisation), including hydrostatic test certification, complete in all respects.The item includes supply of empty cylinder only (without gas filling), including all necessary accessories, handling, transportation, and delivery as directed. |
| 53 | (A) WOMENS TOILET AND PHC.Providing and supplying Semi Fowler Patient Bed made of M.S. tubular frame of suitable sections, overall size approximately 2050 to 2100 mm length and 900 to 950 mm width, mattress platform size 1970 mm × 790 mm, fabricated from 18 gauge CRCA perforated M.S. sheet, mounted on rigid frame of ERW M.S. tubes (approx. 60 × 30 × 1.6 mm thick), complete with backrest adjustable up to 65° by screw mechanism operated through handle, having two-section top, detachable head and foot panels, provision for IV saline rod at four locations with telescopic stand (2 hooks), urine bag holder, chart holder, all corners rounded, provided with 75 mm rubber buffers, PVC shoes at legs, finished with epoxy powder coating of 50–100 microns thickness, complete as per specification.The bed shall be suitable for safe working load up to 200 kg, including all necessary fittings and accessories, without mattress and without castors/side railings, conforming to Medical Device Rules 2017 and ISO 13485 certification, complete. |
| 54 | (A) WOMENS TOILET AND PHC.Providing & supplying Foldable Wheelchair (Adult), non-powered, rear wheel drive, bimanual operation, ERW tubular frame, powder coated finish, complete with footrest, brakes and accessories | IS 7454 (Latest) |
| 55 | (A) WOMENS TOILET AND PHC.Providing and supplying 5-part automated hematology analyser, fully automatic, closed system, with CBC and differential analysis, complete with accessories, consumables, installation, testing and 3-year warranty – complete. |
| 56 | (A) WOMENS TOILET AND PHC.Providing and supplying Stretcher Trolley conforming to IS 4035, MS tubular frame with castor wheels, complete as per specifications and standards – complete. |
| 57 | (A) WOMENS TOILET AND PHC.**Providing, supplying, installing, testing and commissioning of CTG (Cardiotocography) machine / fetal monitor**, trolley mounted, with twin fetal heart-rate monitoring, FHR and TOCO monitoring, pulse Doppler transducers, acoustic stimulator, computerized trace interpretation, colour TFT display, digital data storage, thermal printer, event marker, suitable trolley and all standard accessories including FHR probes, TOCO probe, belts, ultrasound gel, cables and necessary electrical accessories, conforming to applicable Medical Device Rules, 2017 and relevant standards, complete as directed by Engineer-in-Charge.**Unit: Each (No.)** |
| 58 | (A) WOMENS TOILET AND PHC.Royalty Charges For Other Material |
| 59 | (A) WOMENS TOILET AND PHC.material Testing Charges |
| 60 | (B)AMPHITHEATRE. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 61 | (B)AMPHITHEATRE.Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 62 | (B)AMPHITHEATRE.Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 63 | (B)AMPHITHEATRE.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 64 | (B)AMPHITHEATRE.Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 65 | (B)AMPHITHEATRE.Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 66 | (B)AMPHITHEATRE.Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 67 | (B)AMPHITHEATRE.Providing and applying 2 Coats of high quality acrylic copolymer matt approved low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. |
| 68 | (B)AMPHITHEATRE.Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 69 | (B)AMPHITHEATRE.Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 70 | (B)AMPHITHEATRE.Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. |
| 71 | (B)AMPHITHEATRE.Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms.( consolidated thickness). |
| 72 | (B)AMPHITHEATRE.Supplying on site well decomposed Farmyard Manure for excavation area of depth of 30 cms. (Consolidated thickness). |
| 73 | (B)AMPHITHEATRE.Providing on site required variety of lawn (free from weeds /diesease etc.) Cynadon/ paspalum/ selection for 1 sqm. area dibbling distance 5 cms. apart c/c. |
| 74 | (B)AMPHITHEATRE.Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms. |
| 75 | (B)AMPHITHEATRE.Filling fresh garden soil / silt & manure in excavated area of depth 30cms. (As per P&G DSR 2022-23 Items of garden work,Sr No.13) |
| 76 | (B)AMPHITHEATRE.Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour (P&G DSR 2022-23 Items of garden work,Sr No.23) |
| 77 | (B)AMPHITHEATRE.Maintainance of Newly Developed lawn Area. For First 30 days Only (Paspallum/ selection ( P&G DSR 2022-23 Items of garden work,Sr No.28) |
| 78 | (B)AMPHITHEATRE.Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Duranta Golden;Bag Size 7'' x 8'',(plants list) 2(a)serial no 10. |
| 79 | (B)AMPHITHEATRE.Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Alternenthera; Bag Size 4\\" x 5\\",(plants list) 01,serial no 08. |
| 80 | (B)AMPHITHEATRE.Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- pentas; Bag Size 7\\" x8\\",(plants list) 01 a,serial no 20. |
| 81 | (B)AMPHITHEATRE.Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Russelia; Bag Size 7\\" x8\\",(plants list) 01 a,serial no 23. |
| 82 | (B)AMPHITHEATRE.Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Ixora mini; Bag Size 7\\" x8\\",(plants list) 01 a,serial no 08. |
| 83 | (B)AMPHITHEATRE.Maintenance of Newly Developed Shrubs Area. ForFirst 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.31) |
| 84 | (B)AMPHITHEATRE.Royalty Charges For Other Material |
| 85 | (B)AMPHITHEATRE.material Testing Charges |
| 86 | (C)ART GALLERY.Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 87 | (C)ART GALLERY.Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 88 | (C)ART GALLERY.Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 89 | (C)ART GALLERY.Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 90 | (C)ART GALLERY.Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 91 | (C)ART GALLERY.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 92 | (C)ART GALLERY.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 93 | (C)ART GALLERY.Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. M : As directed by Engineer-in-charge. |
| 94 | (C)ART GALLERY.Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 95 | (C)ART GALLERY.Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 96 | (C)ART GALLERY.Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 97 | (C)ART GALLERY.Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 98 | (C)ART GALLERY.Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 99 | (C)ART GALLERY.Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 100 | (C)ART GALLERY.Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 101 | (C)ART GALLERY.Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 102 | (C)ART GALLERY.Providing and applying 2 Coats of high quality acrylic copolymer matt approved low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. |
| 103 | (C)ART GALLERY.Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 104 | (C)ART GALLERY.Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 105 | (C)ART GALLERY.Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 106 | (C)ART GALLERY.Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite |
| 107 | (C)ART GALLERY.Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. |
| 108 | (C)ART GALLERY.Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 109 | (C)ART GALLERY.Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 110 | (C)ART GALLERY.Royalty charges for other material |
| 111 | (C)ART GALLERY.Material Testing Charges |
| 112 | (D)EV CHARGING STATION.Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 113 | (D)EV CHARGING STATION.Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 114 | (D)EV CHARGING STATION.Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer- in-charge. |
| 115 | (D)EV CHARGING STATION.Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. |
| 116 | (D)EV CHARGING STATION.Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge. |
| 117 | (D)EV CHARGING STATION.Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 118 | (D)EV CHARGING STATION.Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) |
| 119 | (D)EV CHARGING STATION.Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 120 | (D)EV CHARGING STATION.Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) |
| 121 | (D)EV CHARGING STATION.Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 122 | (D)EV CHARGING STATION.Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 123 | (D)EV CHARGING STATION.Finishing upto 225 mm thick cement concrete laid to proper level and slope including compacting finishing with tremix treatment for paving slab with compaction by screed vibrator , removing excess water from the cement concrete by tremix vaccum dewatering system , finishing the surface with floater and trowel including all etc. complete as directed |
| 124 | (D)EV CHARGING STATION.Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. M : As directed by Engineer-in-charge. |
| 125 | (D)EV CHARGING STATION.Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) |
| 126 | (D)EV CHARGING STATION.Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 127 | (D)EV CHARGING STATION.Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 128 | (D)EV CHARGING STATION.**Providing, supplying, installing, testing and commissioning of DC electric vehicle charging station**, suitable for charging electric 2/3/4 wheelers, complete with DC charging unit, suitable charging connector/gun, digital display, charging control and protection system, over-voltage/over-current/short-circuit protection, emergency stop, suitable enclosure for outdoor installation, necessary cables, earthing and electrical accessories, conforming to applicable IS 17017 / AIS-138 Part 2 and Ministry of Power guidelines, including transportation, installation, testing and commissioning, complete as directed by Engineer-in-Charge.**Unit: Each (No.)** |
| 129 | (D)EV CHARGING STATION.Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. (As per P&G DSR 2022-23 Items of garden work,Sr No.11) |
| 130 | (D)EV CHARGING STATION.Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of gardenwork,Sr No.21) |
| 131 | (D)EV CHARGING STATION.Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting required plant species as directed etc. complete for required pit size0.60 x 0.60 x 0.60m. (1/10 of semiskilled labour) (As per P&G DSR 2022-23 Items of garden work,Sr No.26) |
| 132 | (D)EV CHARGING STATION.Supplying on site fresh Garden soil (i. e. 3 part soil) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x0.60 x 0.60m ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.44a) |
| 133 | (D)EV CHARGING STATION.Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.44b) |
| 134 | (D)EV CHARGING STATION.Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.(plants list sr no1,item no 5 B) BAHVA |
| 135 | (D)EV CHARGING STATION.Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.(plants list sr no1,item no 5 B) gulmohar |
| 136 | (D)EV CHARGING STATION.Royalty Charges For Other Material |
| 137 | (D)EV CHARGING STATION.Material Testing Charges |
| 138 | Providing, supplying and commissioning of battery-operated electric three-wheeler passenger auto-rickshaw, L5 category, suitable for carrying driver and minimum 3 passengers, with lithium-ion battery, electric motor, direct-drive/automatic transmission, suitable charging system, passenger seating, roof/body enclosure, headlights, tail lamps, indicators, horn, rear-view mirrors, speedometer, braking and suspension system, tyres and all standard safety accessories, conforming to applicable CMVR/AIS requirements and duly type-approved/registered, including transportation, delivery, testing and commissioning, complete as directed by Engineer-in-Charge. |
| 139 | Providing, supplying and commissioning of battery-operated electric bicycle/e-cycle**, equipped with BLDC electric motor, rechargeable lithium-ion battery, pedal-assist system, suitable charger, LED head lamp, tail lamp, horn, display/speedometer, brakes, suspension, tyres, mudguards, stand and all standard accessories, having suitable long-range battery capacity, complete with transportation, delivery, testing and commissioning, as directed by Engineer-in-Charge. |
| 140 | Insurance @ 1% |
| 141 | INTERNAL ELECTRIFICATION |
| 142 | EXTERNAL ELECTRIFICATION Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender