Tender For Works And Services - Supply And Installation Of Electro-Mechanical Equipment’S With Fabricated Tanks For Etp With Providing Boundary Wall And Other Misc Civil Work Near Etp Site Of Jagannathpur Ocp Under Bhatgaon Area.(Under Ec Conditions) [2N
Tender Value
37.14 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
10 days left
EMD
46500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surajpur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Works And Services - Supply And Installation Of Electro-Mechanical Equipment’S With Fabricated Tanks For Etp With Providing Boundary Wall And Other Misc Civil Work Near Etp Site Of Jagannathpur Ocp Under Bhatgaon Area.(Under Ec Conditions) [2Nd Call]
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:2:4 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of cetring, shuttering, finishing and reinforcement - all work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) . |
| 5 | Reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for. Columns, piers, abutments, pillars, posts and struts. |
| 7 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Brick work with fly ash bricks in foundation and plinth in Cement mortar 1:4 (1 cement : 4 sand) |
| 9 | Brick work with flyash brick in superstructure from P.L. to floor V level in cement mortar 1:4 ( 1 cement : 4 sand ) |
| 10 | 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand) |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 12 | Applying priming coat. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat). |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 14 | Colour washing such as green, blue of buff to give an even shade : New work ( two or more coats) with a base coat of white washing with lime. |
| 15 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-incharge,with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). |
| 16 | Design, supply, errection and commissioning of pre-fabricated effluent treatment plant of capacity 15 KLD with utilizing Primary, secondary and tertiary filtration to achieve desired water quality result along with utilisation of existing infrastructure of plant as details mentioned over attached Special Technical Provision of NIT. Warranty of complete system should be for minimum one year period from date of completion of work. Submitted design and drawing shall be proof checked by the agency from any Govt engineering college/reputated NIT or IIT as per instruction of Engineer-in-Charge. |
| 17 | Day to day ETP operation , cleaning of sludge tank and upkeeping of the garden / lawn including planting of the plants sappling, uprooting of the rank vegetation and weeds, periodical digging / loosening of the ground, keeping the entire garden in condition etc. all complete as per the instructions of the Engg-In-Charge. 02 nos Manpower to be provided (01 no Semi skilled & 01 no Unskilled.) |
| 18 | Supplying at site all type of different variety seasonal flowers / plants all complete as per the instructions of the Engr-In-Charge |
| 19 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender