Tender For Construction Of 22Kv Sub Station With Allied Facilities Near Check Post No.2 In Voc Port.
Tender Value
46.99 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
20 days left
EMD
94000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 22Kv Sub Station With Allied Facilities Near Check Post No.2 In Voc Port.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in trenches for foundation in sand and other loose soils not exceeding 1.50m in width and including dressing of sides and ramming of bottom lift upto 1.50m including getting out of the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m and lift of 1.50m, cost including shuttering, strutting, bailing out seepage of water wherever necessary etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and laying Plain Cement Concrete 1:4:8 (One part of cement, 4 parts of Coarse sand & 8 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (Onepartofcement, One and a half parts of M.Sand (Crushed Stone Sand) &Three Parts of graded stone aggregate (i.e.) 2 parts of 20mmnominalsizegradedmetal&1partof10mmnominalsizegradedmetal)using20mmnominalsizegradedmetalincludingmixing,laying,levelling,consolidation,finishingandcuringetc.,andexcludingthecostofformworkandreinforcementgrillsforallRCCworksinallfloorsuptofullheightofthebuildingetc.,completecomplyingwithAISSandasdirectedbythedepartmental officers. |
| 4 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 5 | Providing Form work including centring, shuttering for foundation footings of columns, mass concrete so as to give a rough finish shuttering and propping etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Filling basement with available excavated earth in trenches, plinth, sides of foundation etc., in layers not exceeding 20cm in depth, consolidating and watering etc.,complete complying with AISS and as directed by the departmental officers. |
| 7 | Brickwork in Cement Mortar 1:5 (M.Sand (CrushedStoneSand)) (Onecement, five M.Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 8 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floorsupto full height of the building including necessary scaffolding, racking of masonry joints, cleaning,curingetc.,completecomplyingwithAISSandasdirectedbythedepartmental officers. |
| 9 | Providingand layingapprovedcolourand quality of StainFree Nano Polish VitrifiedTiles 600x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick.The rate inclusiveofcostoftiles,allmaterials,labour,whitecement,conveyanceetc.,complete complyingwith AISSandasdirectedbythedepartmental officers. |
| 10 | Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of 30 x 30 cm wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tiles including all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers |
| 11 | Providing and laying terrace lime concrete weathering course with grade brick aggregate 25mm nominal size and 50% mortar comprising of 1 lime putty and 2 surkhi and curing includingall materials, labour, etc., complete complying with AISS and as directed by the departmentalofficers. |
| 12 | Finishing the top of weathering course with one course of machine Pressed tiles of size 23 cmX 23 cm X 2cm in Cement Mortar 1:3 including all materials, labour, etc., complete complyingwith AISS and as directed by the departmental officers. |
| 13 | Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade.Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, allmaterials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Applying One coat of Alkali Resistant Primer and Two coats of APEX- Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour,brushes,scaffolding,etc.,completecomplyingwithAISSandasdirectedbythedepartmental officers. |
| 15 | Applying Two coats ofSynthetic Enamel paint (excluding priming coat) on New wood andwood based surfaces interior to give an even shade including cleaning of all dirt, dust andother foreign matter, sand papering and including cost of Synthetic Enamel Paint and labour charges etc., complete complying with AISS and as directed by the departmental officers |
| 16 | Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing,interior to give an even shade including cleaning the surface of all dirt, dust and other foreignmater including all materials, labour, brushes, etc., complete complying with AISS and asdirected by the departmental officers. |
| 17 | Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutterprofile are reinforcement with GI/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber(black colour) covered with overall the edges of frame and shutter.The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should havekey lockableaction,security protectivehinges,stronglockingsystemsandasper size for arresting noiseand energyloss. Theconnectingmechanismbetween sashand outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 18 | Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets.Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The overall size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers. |
| 19 | Supplying and fixing UPVC ( Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of fromthe profile the size of outer frame 60mm X 58mm and shutter profile size of 60 X 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber(black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiationspin headedglass 4mmthickshouldbeprovidedinthe louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use onwork.The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 20 | Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe,specials etc.,complete complying with AISS and as directed by thedepartmental officers. |
| 21 | Supplying and laying in trenches 75 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threadingcostofpipe,specialsetc.,completecomplyingwithAISSandasdirectedbythedepartmental officers. |
| 22 | Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipeandspecialsuchaselbows,tee,unionjoints,reduceretc.,cuttingthreadingetc.,completecomplying withAISS and as directed bythe departmental officers. |
| 23 | Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls,packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipeandspecialsuchaselbows,tee,unionjoints,reduceretc.,cuttingthreadingetc.,completecomplying withAISS and as directed bythe departmental officers. |
| 24 | SupplyingandfixinginpositionofbestIndianmakeheavydutyGunMetalGateValveat32mmdia.ofapprovedqualityincludingallmaterials,labouretc.,completecomplyingwith AISS and as directed by the departmental officers. |
| 25 | SupplyingandfixinginpositionofbestIndianmakeheavydutyGunMetalGateValveat25mmdia.ofapprovedqualityincludingallmaterials,labouretc.,completecomplyingwith AISS and as directed by the departmental officers. |
| 26 | Supplyingandfixinginpositionof600x450mmsizeMirrorofbestmake,firstqualityapproved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers. |
| 27 | Supplying and fixing in position Brass Chromium Plated Soap Tray of size 150mm x 100mm first quality approved by the department including plugs, screws, all materials, labour etc.,complete complying with AISS and as directed by the departmental officers. |
| 28 | Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mmdia. with Brackets first quality approved by the department including plugs, screws, allmaterials, labour etc., complete complying with AISS and as directed by the departmentalofficers. |
| 29 | Supplying and fixing in position of best Indian make chinaware water closet of indian style (white color) of approved quality (make parryware/Hindware) and size 580mmx440mm with foot rests (Oriya type) with necessary 'P' or 'S' trap in brick jelly concrete in lime mortar 1:2 (one lime two sand) and plastering with CM 1:3 (one cement, three sand) finshing roughly to receive floor finish including all materials, labour etc., complete complying with AISS and as directed by departmental officers |
| 30 | Supplying and fixing 15 x 200 mm Grohe rain shower in the bath & toilet room at HOD rooms, the cost including 15 x 200 mm Grohe rain shower, 15mm Grohe sin. Lev. Con. Divertor,15mm Grohe plain spout, 15x450mm shower arm, 2 in 1 tape, jacquare tape, conveyance charges and fixing charges ect., complete and as directed by departmental officers. |
| 31 | Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mmsize with pedestal (parryware/Hindware) of approved quality with necessary fittings such ascast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVCwaste water pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve andfixing it with the wall with necessary plugs, clamps and screws, and giving water supplyconnection and painting the exposed pipe connection with two coats of paint of approvedcolour, including all labour, materials etc., complete complying with AISS and as directed by thedepartmental officers. |
| 32 | Supplyingandfixinginposition15mmdia.HeavytypeBrassChromiumPlatedPillartapofapprovedqualityincludingallmaterials,labouretc.,completecomplyingwithAISSandas directed by the departmental officers. |
| 33 | Supplyof15mmdiaAngleCock-ChromiumplatedatMaintenancesubdivisionofficeincludingconveyance chargescomplete and asdirected bythe departmental officers. |
| 34 | Supplying and fixing in position of 100mm inlet and 75mm OD outlet PVC floor Nahini Trap of self cleaning design including necessary cement mortar should be provided wherever if required with necessary cement concrete 1:2:4 for embedding, curing, finishing including all materials, labour charges, & conveyance etc.,complete and as directed by the departmentalofficers. |
| 35 | Supplying and fixing of 1000 litrescapacity Sintex double layer water tank with approvedbrand including cost of PVC water tank, making connection with input and output water pipeline and valves.Cost inclusive of all materials, labour charges, & conveyance etc.,completeandasdirected bythe departmental officers. |
| 36 | Providing, Supplying and Laying factory made Chamfered edge Cement Concrete 60mm thick Paver block of M-35 grade with approved colour, design & pattern ofrequired strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & patten over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocksinto the sand bedding layer through vibratory compactionbyusingplatevibrator,fillingthe jointswithsandand cuttingof paverblocktothe required size and pattern, finishing and sweeping extra sand etc., including all materials, labour, tools & plants, conveyance etc., complete and as directed by the departmental officers. |
| 37 | Supplying and fixing Rolling shutters with ISI make of approved size and section using 18 GI sheet with Gear Operated Type (from 8 sqm. to 12 sqm. Area), M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets,side guides and arrangementsfor insideand outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength and M.S top cover to required thickness for rolling shtters.The shutter shall bepainted with one coat of red oxide primer and the rate is inclusive of hood covers,transportation charges etc., including cost of all materials, labour charges and minor tools, all handling and transportation charges to work site etc., completeand as directed by the departmental officers. |
| 38 | Dismantling and removal of Plain Cement Concrete (PCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers |
| 39 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender