Tender For Providing Partitions And Internal (Civil & Electrical) Works For Installation Of Xps Instrument In Room No.Mb-003, Main Building, Gf At Csir-Clri, Adyar, Chennai - 600020 - Reg.
Tender Value
9.45 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
19 days left
EMD
18910
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Partitions And Internal (Civil & Electrical) Works For Installation Of Xps Instrument In Room No.Mb-003, Main Building, Gf At Csir-Clri, Adyar, Chennai - 600020 - Reg.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Items |
| 2 | WOOD AND P. V. C. WORKProviding and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 3 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 4 | FINISHINGPainting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Make: Asian Royale shine or equivalentTwo coats |
| 7 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. Two coatsWith water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Dismantling and DemolishingDismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore |
| 11 | Dismantling of flushing cistern/lab sink of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 12 | Supply and fixing of uPVC Partions made of uPVC Profile Section with an outer wall thickness of 2.30MM (+/- 0.2MM) having profile size of.... • OUTERFRAME: 74MM X 60MM X 56MM• MULLION: 72MM X 60MM X 36MM • GLAZING BEAD: 35MM X 18MM. • UPVC PANEL 20MM MULTI CHAMBARED HOLLOW SECTION: 200MM X 20MM• UPVC PANEL BEAD: 19MM x 16MMincluding all profiles of frames and mullion shall be reinforced, wherever required, with GI steel section of 1.5mm thickness. The window shall have 5mm thick plain glass / uPVC panel grip holded by TPE (Grey) weather sealed gaskets.All the corners and mullion joints of the frame & sash shall be mitred cut & fusion welded without any mechanical joint. All welded joints are to be neatly trimmed & feature grooved nib finish, to make the finished products free from all sharp edges. The complete window shall be fixed into the prefinished opened places, by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak-proof installation, and completion.[Note:Rate including 5mm glass, 3M stickering with CSIR-CLRI Logo and Upvc panel etc complete as per the direction of engineer incharge] : For Partition work: Make: Qute or Equivalent |
| 13 | Supply and fixing of uPVC door made of uPVC Profile Section with an outer wall thickness of 2.30MM (+/- 0.2MM) having profile size of: • OUTERFRAME: 74MM X 60MM X 56MM• SHUTTER: 104MM X 60MM X 66MM • MULLION: 72MM X 60MM X 36MM • GLAZING BEAD: 35MM X 18MM. • UPVC PANEL 20MM MULTI CHAMBARED HOLLOW SECTION: 200MM X 20MM• UPVC PANEL BEAD: 19MM x 16MMincluding all profiles of frames, sash, and mullion shall be reinforced, wherever required, with GI steel section of 1.5mm thickness. The Door shall have 3D Hinge for better Weight Holding capacity. Door has to be provided with Varity of security devise like multipoint lock systems with Cylinder lock facilitated handle, compliant with relevant specification and as directed by department personnel. The window shall have 5mm thick plain glass / uPVC panel grip holded by TPE (Grey) weather sealed gaskets.All the corners and mullion joints of the frame & sash shall be mitred cut & fusion welded without any mechanical joint. All welded joints are to be neatly trimmed & feature grooved nib finish, to make the finished products free from all sharp edges. The complete window shall be fixed into the prefinished opened places, by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak-proof installation, and completion.[Note:Rate including 5mm tk plain/louverd glass, 3M stickering with CSIR-CLRI Logo and Upvc panel etc complete as per the direction of engineer incharge]:For Single/Double door shutter: Make: Qute or Equivalent |
| 14 | Providing and fixing Acrylic/Polycarbonate sheet for window, ventilator shutters, roofing etc, fixing in the steel work with corroshild make screws and partitions etc, cloured Acrylic sheet with required is clear embossed with both side UV stabilizer, Non transparency , conforming to the relevent IS code including cutting/CNC cutting required design to any shape/color and size as required with silicon sealent around the glass and making good etc. complete as per the direction of Engineer-in-charge. upto all floor five level. Any colour as approved by Engineer-in-charge. Size:5mm thick Acrylic/Polycarbonate sheet |
| 15 | Repair of false ceiling including removing, replacement of tees, angles, new false ceiling tiles matching with existing tiles, leveling,silicon sealent and required support etc complete as per the direction of Engineering-In-Charge. [Repaired area will be measured for payment] |
| 16 | Providing and fixing blackout roller blinds with 100% polyester fabric, with 0.6mm (+/- 5%) fabric thickness & fabric weight of 335gsm (+/- 5%) . lightfastness of > or = 5-6 grade depending on the choice of colour. rubbing fastness > or = 4-5. Lead Free, Fire Retardant, Very High Tearing StrengthMechanism for roller blind with plain casette cover and required fitting all complete as per the direction of Engineer-incharge. brand: Vista or equivalent. |
| 17 | Electrical Items |
| 18 | THREE PHASE DB : Supplying and fixing of 6 way surface/recess mounting, horizontal type three pole and neutral, sheet steel, MCB distribution board,415V, on surface/recess, dust protected, duly powder painted, inclusive of 200A tinned cuppoer bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. 4 way (4+12), Double door |
| 19 | Single phase DB: Supplying and fixing following way, single pole and neutral, sheet steel, SPN MCB distribution board, 240Volts, on surface/ recess, complete with tinned suitable size copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolater)6 way , Double door |
| 20 | SINGLE POLE MCB FOR DBs: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.16 amps to 32 amps Single pole |
| 21 | DOUBLE POLE MCB: Supplying and fixing 32 amps rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.32 amps Double pole |
| 22 | TRIPLE POLE AND NEUTRAL MCB: Supplying and fixing 32 amps rating, 415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of 4 pole in the existing MCB DB complete with connections,testing and commissioning etc. as required.32 amps Triple pole and Neutral |
| 23 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 24 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 25 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 26 | MODULAR 15/16A SOCKET : Supplying and fixing following modular socket on the existing modular plate & switch box including connections but modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 27 | MODULAR 15/16A SWITCH : Supplying and fixing following modular switch (suitable size/model) on the existing modular plate & switch box including connections but modular plate etc. as required.15/16 amp switch |
| 28 | MODULAR BOX WITH COVER PLATE: Supplying and fixing of 6 Modules, G.I box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 29 | MODULAR BOX WITH COVER PLATE: Supplying and fixing of 3 Modules, G.I box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 30 | EARTH BUS: Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 31 | EARTH PLATE: Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long, each termination should be with suitable 2 set of suitable bolt, nut & flat & spring washers of each run, testing earth resistivity of the Electrode and provision of 2'x2'x1' brick & cement chamber with 2'x2' RCC cover and including painting,marking of value etc. with charcoal/coke and salt with fine sand as required. |
| 32 | CABLE END BOX: Supplying and fixing of cable end box ( Loose wire box) suitable for following TPN horizontal, sheet steel,MCB distribution board,415V on surface/recess,complete with testing and commissioning etc.as required.For 4 way,Double door TPN MCB DB |
| 33 | SPLIT AC : Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr(IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS/International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329,capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). 1.5 TR with 5 Star BEE Rating |
| 34 | AC REFRIGERANT PIPE: Supply & installation of AC liquid pipe 1/4 and suction pipe 5/8 with insulation (closed cell elastomeric nitrile rubber tubular pipe section), jointing/brazing including accessories, copper power cable from Split AC IDU to ODU in existing CMS alonwith suitable drain pipe with complete terminations etc., as required. |
| 35 | CIRCUIT WIRING: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class 32mm PVC conduit as required10 sq. mm X 2 run |
| 36 | CABLE MANEGMENT SYSTEM: Supply and laying of following upvc drawing cable manegment system with the necessary straight cover, end cab etc.,as required.105 mm x 50 mm |
| 37 | DOUBLE POLE ELCB/RCCB WITH METAL ENCLOSURE:Supplying and fixing DP sheet steel enclosure on surface/recess along with 40A 240V \\"K\\" curve, DP Earth Leakage circuit breaker/Residual Current Circuit Breaker, 30mA sensitivity complete with connections, testing and commissioning etc. as required. |
| 38 | FOUR POLE MCB WITH METAL ENCLOSURE:Supplying and fixing FP sheet steel enclosure on surface/recess along with 63A 415V \\"C\\" curve, FP miniature circuit breaker complete with connections, testing and commissioning etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender