Tender For Providing Light Roofing Over Office Building And Other Maintenance Works At State Warehouse Padannakkad In Kasargod District
Tender Value
5.78 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
10 days left
EMD
14500
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Light Roofing Over Office Building And Other Maintenance Works At State Warehouse Padannakkad In Kasargod District
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable materials with in 50 metres lead as per direction of Engineer -in-Charge. |
| 2 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. |
| 3 | Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.- minimum thickness 1.60 mm) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 5 | Structural steel work ( MS Plate minimum thickness 6 mm) riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 6 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, after preparing the surface by using wirebrush or emery paper,all works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. complete. On steel work |
| 7 | Providing and fixing Galvalume sheets (Supply of Pre painted Alu- Zinc alloy coated steel sheets -55% Aluminium, 43% Zinc, 1.6% Silicons and not less than 0.5mm thick-PPGL, 150 GSM), Sheet should be supplied in single length upto 12 metre or as desired by Engineer in charge. The sheet shall be fixed using self drilling screws with corrosion resistant (SDS of brand Patta) of size 5.5 x 55mm with EPDM seal at top of corrugation complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 250mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and providing ridges including cutting to size and shape wherever required as per direction of engineer in charge,the ridge will be paid separately. The rate inclusive of cost and conveyance of material to site and necessary scaffoldings which required.The contractor shall submit the manufacturers test certificates of the roofing sheet before commencing the work and also required to conduct the test on the randomly selected sample from the site by the Engineer-in -Charge to ensure the minimum thickness. |
| 8 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain 120cm. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 9 | Providing and fixing zinc plated Carbon steel wedge anchor bolt (HSA-M12-make Hilti) of embedment length 150 mm for fixing base plate/channels to RCC walls/columns including drilling holes, tools and tackles, Scaffolding etc. complete as per Engineer in charge. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 10 | Providing silicon compound covering to G.I, bolts over roof all works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 11 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete. All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 13 | Providing and fixing 200mm (or nearest greater available size) PVC half split square type eave gutter including cost of all necessary fittings (PVC down pipe to be paid separately) and conveyance of all materials, labour charges, scaffolding etc. |
| 14 | Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall |
| 15 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cementincluding cost and conveyance of all materials, labour charges, scaffolding etc. complete as required.- 110 mm dia Bend |
| 16 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, ceiling, column etc all complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand). All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 18 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand). All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 19 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 20 | Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster and Finishing with Red Oxide Cement mix in required mix proportion, including curing and finishing to uniform shade, etcIncluding cost and Conveyance of all materials, labour charges etc, complete as required. |
| 21 | Applying two coat of water thinnable cement primer of approved brand and manufacture on wall surface after preparing the surface by using wirebrush or emery paper. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade after preparing the surface by using wirebrush or emery paper.:One or more coats on old work including cost and conveyance of all materials,labour charges, scaffolding charges etc. complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender