Tender For Laying And Jointing Of Hdpe Pipes For Water Supply, Along With Other Related Works, Under The Drinking Water Supply Scheme In Mohalla Murauntola, Ektanagar, And Julahantola Of Nagar Panchayat Oyal Dhakhwa.
Tender Value
1.22 Crore
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
10.42 Lakhs
Bank guarantee accepted
Document Fee
2417
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kheri → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Laying And Jointing Of Hdpe Pipes For Water Supply, Along With Other Related Works, Under The Drinking Water Supply Scheme In Mohalla Murauntola, Ektanagar, And Julahantola Of Nagar Panchayat Oyal Dhakhwa.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of following sizes HDPE Pipe PN-6: Class PE-100 for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest / relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches all complete as per instructions of Engineer -in - charge. (details are also mention in sr no- 2 to 4)90 mm dia HDPE Pipe PN-6, PE:100 |
| 2 | 110 mm dia HDPE Pipe PN-6, PE:100 |
| 3 | 140 mm dia HDPE Pipe PN-6, PE:100 |
| 4 | 160 mm dia HDPE Pipe PN-6, PE:100 |
| 5 | Supply of HDPE specials as per conformation toI.S.S. suitable for above HDPE pipes and Electrofusion Jointing F.O.R. destination including all taxes and insurance. (10% amount of above sr no- 1, 2,3 and 4) |
| 6 | Supplying the following dia DI butterfly /sluice valves, class I, working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments, including valve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge. (details are mention in sr no-7 to 9)80 mm dia |
| 7 | 100 mm dia |
| 8 | 150 mm dia |
| 9 | Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S. specifications including all taxes and insurance up to site of work (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer-in-charge. |
| 10 | Excavation of earth in ordinary soil (loam clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour T&P etc complete as per instructions of Engineer-in-charge. |
| 11 | Carting from store (upto 8Km. or within municipal limit which is more) following sizes of HDPE pipes, specials coupling, fittings etc.to the site of work. Lowering the same into trenches and laying to true alignment and gradient including testing of pipe lines (excluding trenching), but including cutting of pipes for making joints by electrofusion materialchecked and approved by E&I. (details are mention in sr no-12 to 14)90 mm dia HDPE Pipe PN-6, PE:100 |
| 12 | 110 mm dia HDPE Pipe PN-6, PE:100 |
| 13 | 140 mm dia HDPE Pipe PN-6, PE:100 |
| 14 | 160 mm dia HDPE Pipe PN-6, PE:100 |
| 15 | Carting of sluice valves / scour valve from store (details are mention in sr no-19 to 21)80 mm dia |
| 16 | 100 mm dia |
| 17 | 150 mm dia |
| 18 | Surface box type chamber including supply and fixing of 150mm x 150 mm size surface box. (upto 125 mm dia valve) |
| 19 | Masonry type chamber with RCC cover (more than 150 mm dia valve) |
| 20 | Supply of all materials, labour, T&P etc. and construction of fire hydrant chamber complete required for proper completion of the work asper type design (with RCC cover) |
| 21 | Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge. |
| 22 | Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at every inter-section, complete as per drawing and direction. |
| 23 | Making Nala crossing falling on alignment of pipe line including cost of D.I. pipe one no. (5.50m length) including supply of all materials, labour, T&P, etc complete required for proper completion of work. width 0.5 m to 1.0 m |
| 24 | Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement ofroad by old materials. (details are mention in sr no-25 to 30)CC Road |
| 25 | Interlocking tile Road |
| 26 | Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal ofunserviceable materials upto distance of 50m. (details are also mention in sr 27)CC Road as per departmental drawing and design |
| 27 | Interlocking tile Road as per departmental drawing and design |
| 28 | Road Crossing - Excavation in foundation of trench of proper size in soil mixed with moorum, Shingle, Kankar, soft rock, hard rock, including refilling, dressing and ramming earth or sand or bajri, ballast, including providing, supply, carting, lowering, laying and jointing of casing pipe of RCC NP-3 with appropriate size, with rubber ring joint, sand filling in gap inside pipe, insertion of distribution pipe into the encasing pipe including supply of T&P, including concrete of 150 mm thick in with 40mm gauge brick ballast local sand and cement in proportion of 8:4:1, provision for barricading, labour for traffic diversion etc. Complete for proper completion of work as per instruction of Engineer. 100 mm dia. Pipe |
| 29 | Making house connection should be done atleast 2 m inside the boundary wall with provision of tap from distribution line to outer wall of house with supply of 1 m above GL G.I. pipe (15 mm) (above ground) & average 05 mtr. HDPE Pipe (20 mm) including specials saddle Tapetc. of suitable size T&P etc. including excavation laying and jointing for proper completion of work as per instructions of Engineer. |
| 30 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender