Tender For Rate Contract For Replacement Of Old And Inefficient Submersible Pump Set, Gi Pipes And Cables Under Sub Div Urban Nokha
Tender Value
70 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rate Contract For Replacement Of Old And Inefficient Submersible Pump Set, Gi Pipes And Cables Under Sub Div Urban Nokha
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.Rates are exclusive of GST. |
| 2 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 3 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 4 | 7.5 KW (10 HP) & head up to 120 mtr. |
| 5 | 7.5 KW (10 HP) & head above 120 mtr. |
| 6 | 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 7 | 9.3 KW (12.5 HP) & head above 120 mtr. |
| 8 | 11 KW (15 HP) & head up to 120 mtr. |
| 9 | 11 KW (15 HP) & head above 120 mtr. |
| 10 | 13 KW (17.5 HP) & head up to 120 mtr. |
| 11 | 13 KW (17.5 HP) & head above 120 mtr. |
| 12 | 15 KW (20 HP) and above, head up to 120 mtr. |
| 13 | 15 KW (20 HP) and above, head above 120 mtr. |
| 14 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.Rates are exclusive of GST. |
| 15 | Above 5 HP and up to 10 HP |
| 16 | Above 10 HP and up to 15 HP |
| 17 | Above 15 HP and up to 20 HP |
| 18 | Above 20 HP and up to 30 HP |
| 19 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. Rates are exclusive of GST. |
| 20 | 3 core 4.0 Sq.mm |
| 21 | 3 core 6.0 Sq.mm |
| 22 | 3 core 10.0 Sq.mm |
| 23 | 3 core 16.0 Sq.mm |
| 24 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. Rates are exclusive of GST. |
| 25 | 10.0 Sq.mm, 4 core |
| 26 | 16.0 Sq.mm, 4 core |
| 27 | 25.0 Sq.mm, 3.5 core |
| 28 | 35.0 Sq.mm, 3.5 core |
| 29 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.Rates are exclusive of GST. |
| 30 | 65 mm dia |
| 31 | Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.Rates are exclusive of GST. |
| 32 | 7.5 KW (10 HP) |
| 33 | 9.3 KW (12.5 HP) |
| 34 | 11.0 KW (15 HP) |
| 35 | 15.0 KW (20.0 HP) |
| 36 | 18.5 KW (25.0 HP) |
| 37 | Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.Note: Duty condition of required pump shall also be mentioned in BoQ.Rates are exclusive of GST. |
| 38 | Discharge 20 to 30 LPS and head 81 to 90 M |
| 39 | Discharge 31 to 40 LPS and head 71 to 80 M |
| 40 | Discharge 41 to 50 LPS and head 81 to 90 M |
| 41 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 42 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 43 | 80 mm HW |
| 44 | 100 mm HW |
| 45 | 125 mm HW |
| 46 | 150 mm HW |
| 47 | 200 mm HW |
| 48 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.Rates are exclusive of GST. |
| 49 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender