Tender For Tender For Zonal Maintenance Contract (Zone-Iv) For Tondiarpet Housing Colony Residential Quarters And Its Surrounding Area For A Period Of Two Years In Ee(C)Thc Premises Of Chpa.
Tender Value
2.91 Crore
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
5.83 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Zonal Maintenance Contract (Zone-Iv) For Tondiarpet Housing Colony Residential Quarters And Its Surrounding Area For A Period Of Two Years In Ee(C)Thc Premises Of Chpa.
BOQ
| Sl. No. | Item Description |
| 1 | 1.Dismantling and removing the existing wornout wooden/PVC/FRP doors/Windows with frame area less than 3Sqm etc., including frame with shutters without damaging the existing structures nearby, including transporting and handing over the same to departmental stores within a lead of 1km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 2 | 2.Dismantling and removing the existing damaged IWC from Toilet flooring with all accessories without damaging the existing structures nearby including transporting and handing over the same to departmental stores within a lead of 1km including collecting and depositing the debris within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 3 | 3.Dismantling and removing the existing GI/PVC pipe from external wall surfaces above ground level with all accessories etc., without damaging the existing structures nearby wherever required and handing over the same to department stores within a lead of 1km all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 4 | 4.Dismantling and removing the existing GI/PVC rainwater/sewer pipe above Ground Level with all accessories etc., without damaging the existing structures nearby wherever required and handing over the same to department stores within a lead of 1km all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 5 | 5.Dismantling and removing the existing GI/PVC sewage pipe below Ground Level with all accessories etc., without damaging the existing structures nearby wherever required and handing over the same to department stores within a lead of 1km all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 6 | 6.Dismantling and removing the existing damaged EWC with trap and all accessories from Toilet flooring without damaging the existing structures nearby including collecting and depositing the debris within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 7 | 7.Dismantling and removing the damaged cuddapah sink size:600x450mm without damaging the existing structures nearby including collecting and depositing the debris within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 8 | 8.Dismantling and removing the damaged RCC Jally Size:750x450mm or nearest size available without damaging the existing structures nearby including collecting and depositing the debris within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete |
| 9 | 9.Chipping thoroughly and removing the existing damaged plastering from ceiling, inside wall plastering, floor areas and wherever required without damaging the nearby existing structures including collecting and depositing the debris within a lead of 50m all as directed at site of work including scaffolding, all labour, tools, equipments, transport, fuel etc., complete |
| 10 | 10.Chipping thoroughly and removing the existing damaged floor/wall tile and wherever required without damaging the nearby existing structures including collecting and depositing the debris within a lead of 50m all as directed at site of work, including all labour, tools, equipments, transport, fuel etc., complete |
| 11 | 11.Dismantling/cutting and removing the existing damaged RCC members of Sun shade, balcony slab, kitchen platform, chimney etc., including stacking of steel bars without disturbing nearby existing structures and conveying, handing over the serviceable materials, if any to the department stores and wherever required including collecting and depositing the Debris with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 12 | 12.Dismantling and removing the existing damaged brick work manually/by mechanical means in Cement Mortar to the required size and shape at all height/level wherever required without damaging the nearby existing structures including stacking of serviceable material and collecting, depositing the debris within a lead of 50m for disposing all as specified and as directed at site including all labour, tools, tackles, equipments, transport, fuel etc., complete. |
| 13 | 13.Dismantling and removing the existing damaged plain cement concrete of toilet/bath flooring and wherever required without damaging the nearby existing structures including collecting and depositing the debris within a lead of 50m all as specified and as directed at site of work, including all labour, tools, tackles, equipments, transport, fuel etc., complete |
| 14 | 14.Dismantling and removing the existing damaged Urinals with all accessories etc., from Toilet without damaging the nearby existing structures including collecting and depositing the debris within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 15 | 15.Dismantling and removing the existing damaged wash hand basin with all accessories without damaging the nearby existing structures including conveying, handing over the serviceable materials to the department stores within a lead of 1km and disposal of dismantled materials within a lead of 50m all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. |
| 16 | 16.Dismantling and removing the existing damaged pressed tiles and remove the penetrated tree roots with cement mortar until the weathering course level from the roof and flashing portion and wherever required without damaging the nearby existing structures including collecting, bringing down the debris to the ground level and depositing the debris within a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 17 | 17.Refixing the Removed MS door/wooden/PVC door/windows/Ventilators with frame without damaging the nearby existing structures all as directed at site of work including all labour, tools, equipments, etc., complete.Note:Hinges, tower bolts, pinheaded glass/frosted glass/plain glass will be measured and paid separate item. |
| 18 | 18.Scrapping thoroughly wall surfaces and removing the existing white/colour wash by scrapping, sand papering and preparing the surfaces smooth including necessary repairs to scratches etc., for painting and colour washing works without damaging the nearby existing structures all as directed at site of work including all labour, tools, equipments, wire brushes, etc. complete. |
| 19 | 19.Providing and laying pressed clay tiles as per approved pattern 20mm nominal thickness of approved size 250x250mm on roofs jointed with cement mortar 1:4 (1 cement: 4 crushed stone sand) mixed with 2% integral water proofing compound, laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) and finished neat complete as per the specification and all as directed at site of work, including, strutting, mixing, transporting, placing, consolidating, curing, all labour, cement, materials, equipments, tools, plants, fuel, water proofing admixture etc., complete. |
| 20 | 20.Providing and laying flashing at the junction of the roof with one course of pressed clay tiles of size 250x250mm and thickness 20mm or nearest size available in the market over the weathering course set in CM 1:4 (1 cement : 4 crushed stone sand) in volumetric portion 20mm average thick mixing waste oil at 10% by weight of cement including pointing the joints with oiled cement mortar 1:4 (1 cement : 4 crushed stone sand) mixed with water proofing compound including fixing the tiles in cement slurry as per the specification and all as directed at site of work including strutting, mixing, transporting, placing, consolidating, curing, all labour, cement, materials, equipments, tools, plants, fuel, water proofing admixture etc., complete. |
| 21 | 21.Clean the terrace portion over the brick jelly, sunken portion and providing plastering in cement mortar 1:3 (1 cement : 3 crushed stone sand), 20mm thick in the Terrace/toilet sunken portion with water proofing compound liquid (admixture of Conplast x 421 IC of FOSROC CHEMICALS or equivalent) as per manufacturer specification and neat cement punning including all as per relevant specifications and as directed at site of work including mixing, transporting, placing, finishing, curing, cement and all other materials, labour, tools, fuel, equipments, etc., complete. |
| 22 | 22.Providing double scaffolding arrangement to the required height by using steel pipes to carry out repair/improvement works of suitable diameter, including providing necessary Horizontal and vertical members, tie members, bracings etc., all round and platforms at various level adequate strength including firmly anchoring the verticals at bottom into the ground and providing safety arrangements all in sound working conditions including removing the scaffolding with platform after completion of repair/improvement works all as per relevant specification and all as directed at site including all labour, materials, tools, equipments, transport, fuel, etc., complete. Note:1) Scaffolding will be measured only one time for entire repair/ improvements (length x height)2) 75% of the payment may be released after erecting of scaffolding in all respects. 3) 25% of the balance payment will be released only after completion of repair/improvement works and removal of scaffolding. |
| 23 | 23.Applying Reebaklens RR (Rust Remover) or equivalent with brush for complete wetting of rusted materials/steel surface and preparing the surface free from all dust particles and loose materials by using wire brush and applying two coats anti corrosive (Nitozinc primer of Fosroc or equivalent) protective coat of approved quality all as per manufacture specification and as directed at site of work. The rate shall include cost of materials, labour, brushes, tools plant equipment, transport, fuel etc., complete.Note: The paynment will be made only for actual surface area of reinforcement bars on which protective coating is applied |
| 24 | 24.Applying epoxy resin bonding agent (Nito bond EPL of Fosroc or its equivalent) coverage 2.20sqm/kg at the top of existing concrete surface using short haired brush and applied on the old concrete surface to receive new finish/concrete/plastering all as per manufacture specification and as directed at site of work. The rate shall include preparing the substrate, mixing the compound, applying, cost of materials, labour, brushes, tools, plant, equipment, transport, fuel etc., complete.Note:The new concrete/plastering shall be placed to the coated substrate, when it is in a tacky state. |
| 25 | 25.Preparing the surfaces of floor plastering in cement mortar 1:3 (1 cement : 3 crushed stone sand), 20mm thick and with neat cement slurry to the required finish, curing etc., all as directed at site of work including cement, all labour, materials, tools, equipments, scaffolding, etc. complete. |
| 26 | 26.Preparing the surfaces of ceiling/lintel/sunshade and plastering in cement mortar 1:3 (1 cement : 3 crushed stone sand) 12mm thick to the required finish, curing etc., all as directed at site of work including cement, all labour, materials, tools, equipments, scaffolding, etc. complete. |
| 27 | 27.Earthwork excavation upto 1.5m by manually/mechanically in ordinary soil, sand, clay, mixed with roots, boulders, weighing individually less than 250kg. debris, rubbish etc., as existing at site of work up to 1.5m depth for hardening area, chamber, sewerage line and wherever required, and as directed at site of work, including dressing of sides, dewatering if any as specified under relevant specifications, depositing the excavated earth within a lead of 50m all as per direction of Engineer-in-charge including shoring, shuttering, labour, tools tackles equipments, fuel, etc., complete. |
| 28 | 28.Providing and laying of PCC for levelling course of mix CC 1:4:8 in volumetric proportions (1 cement : 4 crushed stone sand : 8 graded stone aggregate 40mm nominal size) in road portion, foundation for pipes and other such works wherever required consolidated including necessary excavation, levelling & dressing & finishing the top smooth including mixing, transporting, placing, ramming, consolidating, curing, shuttering, all as per relevant specification as directed at site of work including cement, all labour, materials, tools, equipments, fuel etc., complete |
| 29 | 29.Providing and laying of PCC 1:2:4 (1 cement : 2 crushed stone sand : 4 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions for Road side portion, yards and wherever required consolidated including necessary excavation, levelling & dressing & finishing the top smooth including mixing, transporting, placing, vibrating, shuttering, curing all as per relevant specification as directed at site of work including cement, all labour, materials, tools, equipments, fuel, etc., complete. |
| 30 | 30.Providing and placing Reinforced cement concrete of mix 1:1.5:3 (1 cement : 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions for roof beam, Sunshade, slab, above plinth upto five floor level wherever required all as per relevant specification and as directed at site of work including mixing, transporting, placing, ramming, consolidating, etc. including centering, shuttering, vibrating, curing cement, all labour, materials, tools, equipments, fuel, etc., complete.Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 31 | 31.Providing and placing Reinforced cement concrete of mix 1:1.5:3 (1 cement : 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions for compound wall plinth beam and wherever required all as per relevant specification and as directed at site of work including mixing, transporting, placing, ramming, consolidating, etc. including centering, shuttering, vibrating, curing, cement, all labour, materials, tools, equipments, fuel, etc., complete.Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 32 | 32.Providing, casting and fixing in position of Reinforced cement concrete precast cover slabs of mix 1:1.5:3 various thickness more than 40mm thick in volumetric proportions (1 cement : 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) including finishing the exposed surface in cement mortar 1:3 (1 cement : 3 crushed stone sand) 6 to 10mm thick with a floating coat of neat cement punning all as per relevant specification and as directed at site of work including mixing, placing, ramming, consolidating, centering, curing, cement, all labour, materials, tools, equipments, fuel, etc., complete.Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 33 | 33.Providing Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required all as directed at site, including cement, all labour, materials, tools, curing, equipments, etc., complete. |
| 34 | 34.Providing Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required all as directed at site of work including cement, all labour, materials, scaffolding, tools, curing, equipments, etc., complete. |
| 35 | 35.Providing Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:4 (1 cement : 4 crushed stone sand) for all super structures and wherever required all as directed at site of work including curing, cement, all labour, materials, scaffolding, tools, equipments, etc., complete. |
| 36 | 36.Preparing the surfaces of wall and plastering in Cement Mortar 1:5 (1cement : 5 crushed stone sand) 12mm thick wherever required to the required finish, curing etc., all as directed at site of work including cement, all labour, materials, tools, equipments, scaffolding, etc. complete. |
| 37 | 37.Supplying and fixing Cuddapah Sink of size 600x450x200mm with 32mm dia GI waste water pipe and 32mm dia CP waste coupling all as directed at site of work including all labour, materials, tools, equipments, transport, fuel etc., complete. |
| 38 | 38.Supplying and fixing RCC jally of size 750x600mm, 40mm thick for toilet including fixing and pointing wherever necessary all as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 39 | 39.Providing and fixing Indian type Water Closet (Orissa pattern) (Parryware or Hindware) glazed white vitreous of size 580x440mm (overall) or nearest size as available in the market with necessary 'P' or 'S' trap of approved make and quality fixed in brick jelly cement concrete in volumetric proportion, curing and making good the disturbed portions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, fixing TW plugs etc., in sound working condition with all fittings and fixtures, etc., as per relevant specification and as directed at site including all materials, labour, tools, equipment, transport, fuel etc., complete. |
| 40 | 40.Providing and fixing good quality white European Water Closet (Parryware or Hindware) with necessary 'P' or 'S' trap of approved make and quality fixed in brick jelly cement concrete in volumetric proportion, curing and making good the disturbed portions, including providing 10 litres capacity ABS non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, plastic seat and cover fixing TW plugs etc., in sound working condition as per relevant specification and as directed at site including all materials, labour, tools, equipments, fuel etc., complete. |
| 41 | 41.Re-filling the existing brick jelly into the sunken portion wherever necessary all as directed at site of work including consolidation of brick jelly and all labour, tools, equipments, transport, fuel etc., complete. |
| 42 | 42.Providing and fixing good quality vitreous size 630x450mm hand wash basin (White) as available in the market (Kings mere basin of Parryware or Hindware) with a single 15mm c.p. brass pillar tap, c.p. waste fitting, 32mm dia c.p. brass union, 15mm dia PVC inlet connection, 32mm dia PVC waste pipe fittings, a pair of cast iron brackets suitable for fixing the wash hand basin as available in the market, including painting the brackets, etc. with two coats of synthetic enamel paint over one coat of primer, fixing the brackets with teakwood plug and making good the disturbed portion, etc., all as directed in sound working condition including cement and other materials, labour, tools, equipments, transport, fuel etc. complete. |
| 43 | 43.Providing and fixing good quality white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively (Parry ware or Hind ware) fixing to wooden plug with brass screws including all fittings of approved brand & pattern and unions, PVC waste fittings of 32mm dia, all as directed at site of work including cement and all labour, materials, tools, equipments, transport, fuel etc., complete. |
| 44 | 44.Supplying and fixing CP brass angle valve 15mm dia fittings with First quality (Metro or equivalent) in bath rooms/toilets in sound working condition including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 45 | 45.Supplying and fixing flexible type of sink outlet hose pipe 32mm dia wherever necessary all as directed at site of work including all materials, labour, tools, equipments, fuel etc., complete. |
| 46 | 46.Supplying and fixing 2 feet flexible type of connecting hose pipe for urinal/wash basin wherever necessary all as directed at site of work including all labour, tools, equipments, fuel etc., complete. |
| 47 | 47.Supplying and fixing of good quality insects preventing Saint Gobain Fibre netlon mesh consisting of 1.8x1.8mm aperture for size (Approx) to the window openings and ventilators etc., and wherever required after removing the old damaged mesh if necessary including providing 25mm wide hook fasteners nailed stabled continuously on all the four sides of the existing wooden frames and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, transport, fuel etc., complete. |
| 48 | 48.Supplying, fabricating and erecting the new Structural steel work with required buildup section for Roof Trusses, purlins, rafters etc. in roof and fixing of roof trusses in proper position in the vertical supports of 100mm dia MS pipe with MS Hollow section of size 60x40x3.2mm as purlins and MS Hollow section of size 80x40x3mm as rafters or nearest available section with necessary Gusset Plates, base plates, bolts and nuts including all accessories/consumables for proper completion of the work as per relevant specifications and as directed at site of work fixing Joist in proper alignment, including one coat of Zinc rich primer, scaffolding, safety helmets, safety belts, welding plants, welding rods and all labour, materials, tools, transport, fuel etc., complete. Note: 1. The payment is based on the weight of the MS section, MS base plate etc., as fabricated. 2. The weighment will made at site or any other place as approved by the site engineer. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 49 | 49.Providing and fixing Galvanised steel corrugated sheets 0.60mm thick roof and cladding with 550mpa with zinc coating for Roof portion to the required size and fixing in proper position with necessary Bolts, nuts, screws, etc and all accessories, to the existing box channel/L angle including joining the sheets to the required lap length and wherever required without damaging the nearby structures all as specified relevant specifications and as directed at site of work including providing scaffolding, all labour, materials, tools, equipments, transport, fuel, safety helmets, safety belts, etc., complete. Note:Payment will be made only the actual area of sheet provided. |
| 50 | 50.Supplying, fabricating and fixing M.S. grills of required pattern in frames of windows/ventilator etc., with M.S.flats, square or round bars including one coat of primer, including all labour, materials. tools, equipments, transport, fuel etc. complete. Note: 1) The payment is based on the total weight of the MS flats, bars, etc as fabricated. 2) The weighment will made at site or any other place as approved by the engineer-incharge. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 51 | 51.Supplying, fabricating and fixing the M.S grill gate of approximate size varying from 1.5x3.0m to 5x3.0m (size varying to suit the site condition) with single or double leaves as per existing or as directed at site using suitable MS Square bars, MS Square sections, MS Flats, M.S.sheet, etc., using as verticals, horizontals and diagonal members, including fixing the Gate in the existing pintels to the pillars including cutting the flats, bars, etc., to the required length, welding the joints all as directed at site of work and providing suitable fittings, such as MS tower bolts, aldrop bolts by welding including necessary MS ornamental fittings, providing scaffolding, fixing gate in proper alignment and making necessary pocket (dismantling the existing brick work) arrangements including fixing the Grill to the pocket with PCC 1:2:4 (1 cement : 2 crushed stone sand : 4 granite graded stone aggregate of 20mm down to 12mm size) in volumetric proportions etc., including scaffolding, fixing grill in proper alignment, including cement, all materials, labour, tools, transport, fuel, etc., complete. Note: 1) The payment is based on the total weight of the MS flats, bars, etc., as fabricated. 2) The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor.3) PCC 1:2:4 for fixing the gate will be measured and paid under relevant item. |
| 52 | 52.Supplying of the following labourers in general shift for removing/alter/repairing the door/window shutters in suitable fixing condition with relevant fixtures such as screws, nails, fevicol, beadings, etc., including supplying of Mazdoor class I/Coolie in general shift for assist the carpenter and other allotted work as directed at site including tools, plants, equipment, etc., complete. 52a. Carpenter class I |
| 53 | 52b. Carpenter Class II |
| 54 | 52c. Plumber/Fitter Class I |
| 55 | 52d. Mazdoor Class I/Coolie |
| 56 | 53.Providing and fixing in position First Class country wood (SAL/PADAUK) wrought main frames of finished size 95x70mm for doors with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 stone graded aggregate of 20mm down size) etc., and applying two coats of oil based wood preservative of approved brand and manufacture, complete. as per direction of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. |
| 57 | 54.Providing and fixing in position First Class country wood (SAL/PADAUK) wrought main frames of finished size 95x70mm for windows with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 stone graded aggregate of 20mm down size) etc., and applying two coats of oil based wood preservative of approved brand and manufacture, complete. as per direction of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. |
| 58 | 55.Providing and fixing Second class teak wood, 35mm thick fully wood panelled shutters for doors/windows and fixing with butt hinges of required size with necessary screws, including panelling 16mm thick with single/double/four leaves all complete adopting Port Authority's manual and direction of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete.Note:Butt hinges with necessary screws shall be paid separately. |
| 59 | 56.Providing and fixing glazed shutters for windows/clerestory windows with 35mm thick Second class teak wood Shutter frame and fixing with butt hinges of required size with necessary screws, including 5mm thick frosted glass panelling (frosted glass Weight not less than 12.5kg/sqm) all complete adopting Port Authority's manual and direction of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. Note:Butt hinges with necessary screws shall be paid separately. |
| 60 | 57.Supplying and fixing in position 5mm thick plain glass (Saint Gobain or Modiguard) for windows shutter with all accessories like anodized aluminium snap on, beading, rubber beading, country wood beadings, etc., all as per relevant specification and as directed at site of work including all labour, materials, tools, scaffolding, equipments, etc., complete. Note:1) The actual area of glass used alone will be measured for payment purpose.2) The rate shall include the cost of rubber beading, country wood beading etc., |
| 61 | 58.Providing and fixing factory made 30mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved quality all as manufacture's. specification/CPWD specifications and all as directed at site of work including all labour, materials, scaffolding, transport, fuel, tools, equipments, etc., complete. Note: 1. The door shall be manufactured to suit the size of the existing opening available at site.2. The field Executive engineer shall inspect the constituents of materials before fabrication process for which the cost will be borne by the contractor.3. Supplying and fixing necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant items of this schedule. |
| 62 | 59.Providing and fixing good quality 30mm thick or nearest size single leaf factory made PVC rigid foam panelled door shutters with frame (Manufactured by M/s.Rajshree or Qute or equivalent) of approved section to suit the existing door openings and as directed at site with main frame, shutter frame and panels made out of extruded 5mm thick rigid PVC foam sheet mitered at corners and fixing the door main frame on the masonry wall surfaces with 100mm long screws, with PVC fasteners all as per manufacturer's specifications and as directed at site, including all materials, labour, scaffolding, transport, fuel, tools, equipments, etc., complete.Note: 1. The door shall be manufactured to suit the size of the existing opening available at site.2. The field Executive engineer shall inspect the constituents of materials before fabrication process for which the cost will be borne by the contractor.3. Supplying and fixing necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant items of this schedule. |
| 63 | 60.Providing and fixing Stainless steel/aluminium fittings ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws for windows and Doors all as directed at site including all materials, labour, tools, screws, equipments etc., complete. 60a. Butt hinges 125x75x4mm long |
| 64 | 60b. Butt hinges 100mm long |
| 65 | 60c. Butt hinges 75mm long |
| 66 | 60d. Tower bolt (barrel type) 150x10mm |
| 67 | 60e. Tower bolt (barrel type) 250x10mm |
| 68 | 60f. Stainless steel Hooks & Eyes 150mm long |
| 69 | 60g. Stainless steel handle 100mm long |
| 70 | 60h. Aldrop 250mm long |
| 71 | 61.Providing and fixing Stainless steel fitting of Butt hinges 100mm long all as directed at site of work including all materials, labour, tools, screws, equipments etc., complete. |
| 72 | 62.Providing, fixing and laying in position rigid unplasticised 110mm dia PVC Pipe line 4Kgf/Sq.CM for Rain water pipe (Finolex or Truebore or Varun or equivalent) including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives, making the joints water tight all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete. |
| 73 | 63.Providing, fixing and laying in position rigid unplasticised PVC pipes 160/110/75mm dia for waste water and sewage line on the floors (Finolex or Truebore or Varun or equivalent) capable of withstanding a pressure of 6Kgf/Sq.cm including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives, making the joints water tight and connections to floor traps, gully traps, manhole etc., all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete.63a.160mm dia |
| 74 | 63b.110mm dia |
| 75 | 63c.75mm dia |
| 76 | 64.Construction masonry chamber and providing PVC gully trap wherever required and as directed by department including cement, materials, all labour, tools, equipments, fuel etc., complete. |
| 77 | 65.Providing and fixing 110mm dia PVC Nahani trap (floor trap with gratings suitable for PVC waste water pipe) embedding the trap making the joints water tight etc., all as directed at site of work including all materials, labour, tools, equipments etc., complete. |
| 78 | 66.Providing and fixing First quality UPVC Ball valve of sizes 32/25mm dia as per IS specification to the water pipe lines in sound working condition including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. 66a. 32mm dia |
| 79 | 66b. 25mm dia |
| 80 | 67.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 32/25mm dia (Trubore/Finolex) or equivalent (Internal work exposed on wall) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, including all labour, materials, tools, equipments, scaffolding etc., all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., including punching the masonry/concrete wherever required. 67a. 32mm dia |
| 81 | 67b. 25mm dia |
| 82 | 68.Providing and fixing heavy duty PVC 15mm dia Screw down tap as per IS specification in sound working condition including fixing to water pipe lines, making water tight joint etc., including testing the valves and joints all as specified and as directed at site of work including all materials, labour, tools, equipments etc., complete. |
| 83 | 69.Preparing the surfaces of outer walls and applying two coats of Acrylic Smooth exterior paint @ 1.67 ltr/10 sqm (asian or equivalent) over one coat of water thinnable cement primer having VOC content less than 50grams/litre for old wall surfaces to give an even shade wherever required including removing tree roots and shrubs around the exterior building all as directed at site of work including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 84 | 70.Preparing the surfaces of interior walls/ceiling with scrapping the required portion and applying two coats of premium acrylic emulsion paint (asian or equivalent) over one coat of water thinnable cement primer having VOC content less than 50grams/litre for on old walls (colour) ceiling (white) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments scaffolding etc., complete |
| 85 | 71.Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint colour (asian or equivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 86 | 72.Preparing the surfaces of new wooden members and painting with two coats of synthetic enamel paint colour (asian or equivalent) over one coat of wood primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 87 | 73.Supplying, fabricating and placing in position Thermo-Mechanically Treated bars of grade Fe-500D (TMT steel bars) or more as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification and as directed, including steel, all materials, labour, tools, equipments, transport, fuel etc., complete.Note:The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., Binding wire will not be measured for payment purpose. |
| 88 | 74.Preparing the surfaces of old steel members and painting with two coats of synthetic enamel paint (asian or equivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments etc., complete. Note:1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2. The above quantity is inclusive of painting co-efficient. |
| 89 | 75.Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge as directed at site including all other materials, labour, tools, equipments scaffolding, fuel etc complete. |
| 90 | 76.Providing and laying Ceramic glazed wall dadoing/skirting (15cm height) digital tiles of size 300X450mm or nearest size as available in the market with good quality ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, in a bedding mortar of 12mm thick in C.M 1:3 (1 cement : 3 crushed stone sand) and fixing with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the tiles to a required height as directed at site including cement and all other materials, labour, tools, equipments scaffolding, etc complete. |
| 91 | 77.Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands)(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4 (1 Cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3kg/sq.m including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade etc., complete and as directed at site, including all materials, labour, tools, equipments etc., complete. |
| 92 | 78.Providing and laying Matt/Antiskid Vitrified tile for flooring conforming to IS :15622 (thickness to be specified by the manufacturer) with good quality (Jhonson/Kajaria/Nitco or other approved brands) of size 600x600mm or of nearest approved size and colour match with existing and water absorption less than 0.08%, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade complete., including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 93 | 79.Hacking the existing cement concrete flooring surface to receive bed of cement mortar and providing Flooring with Chequerred precast cement concrete tiles 22mm thick using marble chips of size 6mm as available in market of approved pattern shade and colour set in cement mortar1:4 (1 cement: 4 crushed stone sand) 20mm thick to the required height and fixed with cement slurry in footpath & courtyard and joints neatly pointed with pigment to match the shade of tiles, curing all as per relevant specification and as directed at site of work including all labour, tools, equipments, rubbing and cleaning etc. complete,. |
| 94 | 80.Uprooting and clearing of weeds, shrubs, bushes and other unwanted vegetations using man power/weeds cutting machine including removing all other unwanted loose materials, rubbish etc., in Quarters around, Back yards, Pump rooms and any where in the premises of T.H. Colony wherever required including conveying and disposing the same to the nearest dustbins within a lead of 50m by using weed cutting machine or anywhere as directed at site including hire charges & maintenance cost for weed cutting machine, labour charges for operator, conveying the machineries in T.H. Colony premises all as directed at site of work including all labour, tools, equipments, transportation, fuel and cutting wire for weed cutting machine etc., complete. |
| 95 | 81.Hire charges for engaging of Hydraulic Excavator of 1 cum bucket (3D) with driver for clearing the unwanted heap of earth/debris/Fallen tree branches and levelling the uneven surface around the area of Tondiarpet Housing colony inclusive of cost of lubricating oil, diesel, petrol, kerosene oil, other consumables for running the plant and machinery, etc., all as directed at site of work including all labour, tools, tackles, equipments, fuel, transport, etc. complete. |
| 96 | 82.Providing, stretching, tying and fixing in position of G.I. barbed wire fencing 2 ply 4 points 12gauge with bars 150mm horizontally and vertically 200mm centre to centre and tying with 18gauge GI binding wire including all labour, materials, equipments, scaffolding, transport, fuel etc., complete. |
| 97 | 83.Operating of vehicle mounted heavy duty suction cum delivery pump capacity of 30 to 45 HP motor including required diesel with driver and operator for dewatering the stagnated water in Tondiarpet Housing Colony premises all as directed at site of work including all labour, tools & plants, equipments, 150mtrs hosepipe, transport, fuel, etc., complete. |
| 98 | 84.Oprerating of “2” numbers of 5 to 7.5 HP Diesel pump with required diesel, driver, suction & delivery hosepipe (Approx 100.00Mtrs) and operator for dewatering of stagnated water in Tondiarpet Housing Colony premises all as directed at site of work including all labour, tools & plants, equipments, 100mtrs delivery hosepipe, transport, fuel, etc., complete |
| 99 | 85.Operating of vehicle mounted Heavy duty jetting cum suction machine including diesel with driver and operator for cleaning sewer lines in Tondiarpet Housing Colony area and wherever required all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete.Note:1. For handling/cleaning the machine, the cost of labour charges will be borne by the contractor. 2. The required water will be given in the near by site in Tondiarpet Housing colony area at free of cost. 3. The rate shall be inclusive of diesel, all tools and plants etc., complete.4. The contractor not claim any charge for damaged parts nor pay for any damaged parts.5. To operate your sewer line cleaning machine from 9.00 AM to 5.00 P.M office working hours. 6. If any Break down or labour problem during working time deduction will be calculated proportionately based on the rate per day/per hour.7. Whenever required the contractor will bring Vehicle mounted jetting cum suction machine with driver and technician for cleaning sewer lines.8. The payment will be made once in month after completing the work, when contractor claim for bill.9. The unwanted materials like silt or any garbage to be dumped at open area as directed by the department.10. Log Book to be maintained by the contractor and the signature must be obtained for payment purpose. |
| 100 | 86.Deep cleaning the existing flooring/floor tiles in neat and hygienic condition by applying sweeping the flooring/floor tiles and mop the floor with detergent and clean water two to three times including all materials, labour, tools, transport, fuel etc., complete. |
| 101 | 87.Cleaning and desilting of gully trap chamber including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in charge including all materials, labour, tools, transport, fuel etc., complete. |
| 102 | 88.Supplying, diluting and injecting chemical emulsion for post constructional anti termite treatment at point of contacts of wood work by chemical emulsion Chlorpyriphos/Lindane (in oil or Kerosene based solution) @ 0.5 litre per holes by drilling 6mm dia holes at down ward angle of 45 degree at 150mm centre to centre and sealing the same and all as directed at site of work including all material, labour, tools, scaffolding, ladder, equipments etc. complete |
| 103 | 89.Loading, Transporting, dumping and levelling the surplus earth/debris to the low lying areas anywhere in T.H Colony within a lead of 3Kms all as per relevant specifications and as directed at site including levelling at dumping site, all labour, transport, tools, equipment, fuel, etc., complete. Note:1) The contractor shall maintain trip sheets in triplicate in approved format at his own cost for the quantity of debris/earth transported. 2) No interim payment will be made. A deduction of 20% will be made on lorry cubical content for earth transportation and No deduction of voids for debris will be made. 3) However, the final quantity of Debris will be restricted to actual quantity of dismantling/demolishing items. 89a. Earth |
| 104 | 89b. Debris Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender