Tender For Renovation Of Oil Terminal Fire Station Building And Desilting Of Wells At Wharf Area
Tender Value
16.80 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
39700
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dakshina Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Oil Terminal Fire Station Building And Desilting Of Wells At Wharf Area
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such similar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenances required to complete the work. In all kinds of soils Depth upto 1.5 m. |
| 3 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 4 | Demolishing stone rubble masonry manually/ by mechanical means in cement Mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge |
| 5 | Dismantling of Structures: Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead b) Cement Concrete Grade M-15 & M-20 |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chow khats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineering-charge. (Of area 3 m² and below) |
| 7 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates |
| 8 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, form work etc. cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. up to plinth |
| 9 | Providing Brick work with common burnt clay non-Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in-charge of work. |
| 10 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 11 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. |
| 12 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile |
| 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. |
| 14 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge |
| 15 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with both side prelam |
| 16 | Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections using aluminium section powdered to a minimum of 60 to 70 microns with exterior durable pure polyester grade powder of approved quality. |
| 17 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 18 | Providing & fixing aluminium tower bolt of 100mm including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete |
| 19 | Providing & fixing aluminium handles including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. Complete |
| 20 | Providing & fixing aldrop and locking arrangements including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete |
| 21 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. |
| 22 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting & making good the walls & floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid |
| 23 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 25 | Providing and fixing white vitreous china clay, flat back or half stall urinal basin of size 580x380x350mm with 5 litres P.V.C automatic flushing cistern, C.I/M. S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps C.I dtrap with outlet grating and other couplings in C.P brass, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. |
| 26 | Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot) |
| 27 | Providing and fixing brass bib cock of approved quality: 15 mm nominal bore |
| 28 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 29 | Providing and fixing Health fauset of approved make and qulaity including cost of all materials, labour and HOM of equipments with all leads complete as per specifications, as directed by the department |
| 30 | Providing & fixing stailess steel 100mm grating, including cost of materials, fixing charges and all other incidental charge etc. complete, as directed by the department |
| 31 | Wall bores in size stone masonry - upto 45 cm thick. |
| 32 | Providing and fixing in position of C.P brass shower rose of approved quality 100mm dia with 15mm dia inlet including cost of conveyence of all material, labour chrges tools & plants and all other incidental charges etc. complete. |
| 33 | Providing & fixing wall mounted S.S.hangers mounted with 06 hooks/ clamp including cost of materials, fixing charges, labours charges and all other incidental charges etc. complete. |
| 34 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. |
| 35 | Providing and fixing mirror of superior glass (of approved quality) & required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing : Rectangular shape 453X357 mm. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm Dia Nominal bore Internal work - Exposed on wall |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25.mm Internal work - Exposed on wall |
| 38 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes |
| 39 | Constructing brick masonry inspection chamber 230 x 150mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 230 x 150mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal , foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, : 2000 lts capacity IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 41 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. |
| 42 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge. |
| 44 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 45 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 ВHP pump etc. by using 100 to 190 BHP complete. (Prior approval of Superintending Engineer will be necessary) |
| 46 | Removal of Silts/sludge from bottom of well manually and lifting of silt from bottom of Well to ground level by bucket/rope/Winch and loading into the tipper. |
| 47 | Carriage of Materials: A: Cost of Haulage Excluding Loading and Unloading: Case - 1: Surfaced Road: Taking output 10 t/trip lead 3.5 Km |
| 48 | Cleaning/ Scrapping of well internal wall and bottom and disinfection |
| 49 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and directions of Engineer-in-charge |
| 50 | Supply & delivery at site brand new heavy duty 2.2KW, best efficient for approved make 200mm 200 mm dia 30600 Ltr/hr discharge@ 18mtr head Open well Submersible Vertical mounting Motor pump set with one year warranty confirming to Indian Standard specification complete |
| 51 | Supplying and fixing 80mm Hose pipe / HDPE with necessary clamps etc. approved Make. |
| 52 | Supply and delivery at site Brand new approved make PVC insulated cable of Flat 3 core (sheathed) of nominal cross-sectional area as per IS 694-1990 with ISI Mark and as per its latest amendment. |
| 53 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross - 3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP |
| 54 | Supply and delivery at site brand new approved make control panel suitable for Submersible / Centrifugal pump confirming Submersible / Centrifugal pump confirming with ISI mark and its latest amendments. |
| 55 | Supply and delivery at site brand new approved make Starter with single phase preventor, Phase Failure protection, Auto On/ Off during Power ON/ Off suitable for Submersible / Centrifugal pump confirming with ISI mark and its latest amendments of approved make. |
| 56 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. 63 Amps |
| 57 | Installation charges of Motor Pumpset, Control Panel, Starter Unit etc., complete including transportation and trail running. |
| 58 | Fabrication and installation of Mild Steel Structure on top of an open well of diameter of 3.45-3.05mts using MS angle & MS Mesh materials welded to form a platform type structure on top of the well for security according to the directions of the Engineer- in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender