Tender For Special Repair Work, Including Bituminous Surfacing, On The Road From Subhash Inter College To Ghariha Village Via Gram Sabha Ghariha.
Tender Value
25.73 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
2 days left
EMD
51460
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghazipur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Work, Including Bituminous Surfacing, On The Road From Subhash Inter College To Ghariha Village Via Gram Sabha Ghariha.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning and Grubbing road land including uprooting wild vegetation ,grass bushes, shrubs ,samplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal be used or auctioned ,upto a lead of 1000 m |
| 2 | constructionof embankment with approved material obtained from barrow pits with a lift up to 1.5m transporting to site spreading to required slope and compacting to meet requirement of tables 300.1and 300.2 with a lead 1000m as per technical specification clause 301.5 |
| 3 | (WBM.GRADE 3) providing and laying and spreading and complteing stone aggregates of specific size to water bound mecadam speci. Inc. spreading in uniform thickness hand packing, rolling with there wheel 8-10 ton static roller in stages 2 proper grade and camber, applying and brooming stone screening/ binding materils to fill up the interstices of coarse aggregates watering and compacting to the required density grading 3 as per technical spec. clause 405.3 compacted thickness 75 mm. |
| 4 | providing and appling of primer Coat with emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraing primer at the rate of 0.70kg/sqm using mechanical means as per MORD specification clause 502 |
| 5 | providing and appling of Tack Coat with bitumin V.G-10 using emulsion pressure distrbutor at the rate of 0.35-0.45 kg/sqm on the primed surface of granular base treated with primer and cleaned with hydroulic broom. |
| 6 | providing and laying and rolling or open graded premix carpet of 20 mm thick composed 13.2 mm to 5.6 mm agg. Either using penetration grade bitumin/ CRMB on emulsion @1.46 kg per sqm to required line , grade and level to serve as wearing course on a previously base by manual MORD specification. 508 |
| 7 | providing and laying of Seal Coat by manual means with 80/100 Grade Bitumin sealing the voids in bituminous surface laid to the specified levels ,grade and coarse fall using type C as per tech spec. CI 510. |
| 8 | Brick edging on both side of road with first class brick 8 cm. (3\\") wide 12 cm. (4.50\\") deep laid with mud mortar including all materials, labours, T&P etc. complete. S.I. No. 765 |
| 9 | construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavment, thickness asper design ,over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade) , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregates not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capicity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythin film wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle ,screed and plate vibrators and finshed in continous operation including provision of contraction and expansion , construction joints, applying debonding strips, primer, sealant , dowel bars near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. |
| 10 | S/F of sign board and photography Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender