Short dated tender - Tender For Construction Of Transfer Station For Compactor And Approach Road For Jal Ligam Office Infront Of Tikuniya Park In Ward No.110, Zone-04.
Tender Value
29.79 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
0 days left
EMD
2.97 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Construction Of Transfer Station For Compactor And Approach Road For Jal Ligam Office Infront Of Tikuniya Park In Ward No.110, Zone-04.
BOQ
| Sl. No. | Item Description |
| 1 | Dismentalling of B.0.E soling/inter locking tiles Including Stacking of servicable material and disposal of unservicable 55.00 material within a lead of 50m as per direction of El/C |
| 2 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 3 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 4 | Earth work in excavation in trenches for foundations pipes cable etc in ordinary soil (Loan clay or sand) inclduing lift upto 1.5m. Lead upto 50m and dressing of sides and ramming of bottom and 71,44 disposal of surplus excavated earth as directed by the Engineer i/c within a lead of 50m. |
| 5 | Cartage of Earth/Malwa lead upto 5.00 km distance including loading/unloading |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 7 | Providing and laying in postion cement concrete of Specified grade excluding the cost of centering and shuttering -All work up to plinth Level. 1:4:8 Cement, coarse sand & graded stone aggregate 40 mm (nominal size). |
| 8 | M-150 Class brickwork with 1:4 cement &coarse sand mortar in Foundation upto plinth etc. all comp. |
| 9 | Centering and shuttering including struting, propping etc. and Foundations, footings, base of cloumns etc. |
| 10 | Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars,posts, sturts, buttresses,string or lacing courses, parapets, coping, brd bloks, anchor blocks, plain window sills, fillets,sunken floor etc. upto floor five level, excluding the cost of centering,shuttering and finishing: |
| 11 | 1:1.5:3 Cement, coarse sand & graded stone aggregate 20 mm(nominal size) |
| 12 | 1:1.5:3 Cement, coarse sand & graded stone aggregate 20 mm (nominal size) |
| 13 | Providing and laying in position specified grade of reinforcedcement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1/3 (1 cement: 1/ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 14 | Steel reinforcement for R.c.c work including straightening. cutting, bending placing in postion and binding all comleteupto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.1:1.5:3 (1 Cement: 1/ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 16 | M-150 Class brickwork with 1:4 cement &coarse sand mortar in Super structre etc. all comp. |
| 17 | 12 mm Cement Plaster of mix 1:4 cement & co.sand etc all comp |
| 18 | Providing and applying white cement based putty of average thickness of 1 mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth including cost of material, labour T&P etc. complete. |
| 19 | Finishing walls with two coat of acrylic smooth exterior paint of best quality ineluding supply of all material, labour and T&P etc. required for proper completion of work. |
| 20 | Covering of shed from all around surronding making wall with tubelar pipe and colour profile sheet upto desired height |
| 21 | Construction of Shed with appropriate quantity and quality of Ms tublar pipe, trusess, purlin and covering the above area with 107.03 moduler style G.I Profile sheeting |
| 22 | Providing and fixing 15 cm wide. 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 23 | Providing & fixing of 100 mm dia PVC pipe 6.00 km/sq.cm working pressure including all fitting as color socket, tee, M.s clamp bend fix to wall by 15 cm long iron nails & solution of damaged wall surface |
| 24 | S/L/J of RCC Hume pipe 300 mm dia including supply of lab. And T&P etc all comp. |
| 25 | Constructing brick masonry manhole in cement mortar 1:4 (1cement: 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1) cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1) cement: 4 coarse sand (zone-111): 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: inside size 900x800mm and 500 mm deep500 mm including C.I.Frame |
| 26 | Providing and fixing of BRC Jali including cost of all material labour, T&P etc. required for proper completion of work & as per Direction of Engineer in charge |
| 27 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454-part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 28 | Providing and fixing ball bearing for rolling shutters |
| 29 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc, as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 30 | supply and installation of 1.5 HP submercible pump including etc all complete |
| 31 | providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area |
| 32 | Providing Retro-reflective regulatory sign board of size 900 mm dia metre made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders etc. will be as per IRC-67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to I No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. |
| 33 | Painting on iron work with one coat of priming coat and two coat with superior synthetic enamel including supply of all |
| 34 | ELECTRICAL ITEMS |
| 35 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect. |
| 36 | S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. |
| 37 | S&F of 63 Amp. 4 pole MCB(10 KA) C Curve |
| 38 | S&F of 100 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T&P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge. |
| 39 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. |
| 40 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer |
| 41 | Supply and wiring of in 25 mm dia heavy duty (2 mm thick) PVC conduit with 2 nos 4 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable 8.00 conduit on surface, with two number 14 SWG copper earth continuity wire etc. complete in all respect. |
| 42 | WATER SUPPLY ITEMS |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 44 | S/fixing of Fullway gate valve 25 mm dia |
| 45 | Sale of old dismenteled material etc all comp. |
| 46 | (A) S.O.B. Bricks. |
| 47 | (B) Brick bats |
| 48 | Add 2% for contingency |
| 49 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender