Tender For Development Of Parking Yard For Tourist Vehicle Adjecent To Talabania Ground In W No. 31
Tender Value
67.86 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
10 days left
EMD
67870
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Parking Yard For Tourist Vehicle Adjecent To Talabania Ground In W No. 31
BOQ
| Sl. No. | Item Description |
| 1 | (Ground Development)Cleaning and grubbing road land including uprooting rank vegetation ,grass ,bushes , shrubs ,saping and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unservicealbe materials and stacking of serviceable materials to be used or auctioned up to lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. as per direction of engineer in charge . |
| 2 | Scarifying old gravelled surface before consolidation of new - gravel etc. all complete as directed by the Engineer-in-charge |
| 3 | Sand Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge. |
| 4 | Providing laying, spreading and compacting graded stone aggregate to \\"WET MIX MACADAM\\" specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H specification for road and bridge works . |
| 5 | Providing P.C.C. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer- in - Charge. |
| 6 | Providing and laying heavy duty factory made hydraulically pressed and mechanically compacted precasted interlocking tuf a stone brand pavers of 80mm thick size shape with 50mm sand bed and leveling and laying of interlocking paver block with sandbinding and final compacting with plate vibrator finishing for the surface. |
| 7 | Rigid smooth centering and shuttering for C.C. work including stripping the same after completion of stripping time. |
| 8 | Engagement of crane 3 ton capacity for lifting purpose of RCC drain cover slab & installing over proper position carefully as per direction of EIC |
| 9 | Providing and fixing in position 3 seaters cement Bench of approved design and make of minimum area 1.5 meter x 0.60meter. Overall all minimum height 0.80 m |
| 10 | Labour charges for shifting of Cast iron pipe & stagging at other site over proper position carefully with the help of hydra as per direction of EIC |
| 11 | (Shed with PH work )Earth work in excavation of foundation in oridinary soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge |
| 12 | Sand Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge. |
| 13 | Cement concrete (1:3:6) using 40mm and down gradedhard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 14 | Providing R.C.C. M20grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge.Column Base |
| 15 | Column&Beam |
| 16 | Plinth Beam |
| 17 | Stair Case |
| 18 | Lintel |
| 19 | TMT reinforcement for R.C.C. work including cutting, bending, binding and placing in position Labor for including cost of binding wire 18 to 20 gauge and cost conveyance of M.S. rod etc. all complete. |
| 20 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work. |
| 21 | Fly ash Brick masonry in cement mortar (1:6) in F&P with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge. |
| 22 | Fly ash Brick masonry in cement mortar (1:6) in Superstructure with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge. |
| 23 | Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 24 | Providing 16mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 25 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. |
| 26 | Supplying fitting fixing of main gate GI framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 27 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect. |
| 28 | Supplying fitting fixing of Ply wood shooter including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 29 | Finishing plastered surface with plaster of paris and making smooth surface to receive painting including cost of plaster of paris. |
| 30 | Wall painting two coats with plastic emulsion paint with cost of paint. |
| 31 | Painting two coats over a coat of primer on new wood/Steel work of doors, windows, grill and including all labour, T & P, cost of paints as per the direction of Engineer-in-charge. |
| 32 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 33 | Supplying ,fitting fixing of WPC door including cost of material, labour etc complete |
| 34 | Supplying, Fitting, Fixing of Precoated Galvanised Iron Profile Sheet Semi Gloss of 100 mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges vally wind ties including cost of material etc comp . |
| 35 | Supplying fitting fixingand febricating iron work arought and put up at purline including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.40 X 40 X 5.0 |
| 36 | 12 X 12 mm |
| 37 | Labour for fitting and fixing in position steel cutting edge as per approved design using M.S. angle plates, bolts and nuts complete including cutting angles to required size, bending to shape, drilling holes, reverting and welding, etc. complete in all respect but excluding cost of angles and plates. |
| 38 | Providing P.C.C. (1:2:4) grade with 12mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge |
| 39 | Providing 12mm thick cement plaster (1:4) with cement punning over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 40 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C |
| 41 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the E.I.C |
| 42 | Supplying Fitting and fixing adjustable bathroom ventilation glass louvers (0.45 mx0.75m) in position in wooden, steel window frames including Frosting glass-panes including cost of all labour and materials cutting grooves etc complete |
| 43 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.250mm to 375mm thick wall |
| 44 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes (SDR 11) conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent)32mm Outer dia C-PVC pipe(External) |
| 45 | 25mm Outer dia C-PVC pipe(External) |
| 46 | Providing and fixing R.C.C. RING cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and extra sockets jam ts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. |
| 47 | Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the following nominal bore with supply of all jointing materialsetc. all completed as per approved specification and direction of E.I.C15mm dia C.P.angular stop cock |
| 48 | 15mm dia C.P. Long body bib cock |
| 49 | 15mm dia C.P. short body bib cock |
| 50 | 15mm dia C.P concealed stop cock |
| 51 | C.P. towel rail.(450x20)mm |
| 52 | C.P.revolving shower (bend type) |
| 53 | 15mm dia C.P pillar cock |
| 54 | C.P.grating |
| 55 | C.P. extension piece-2\\" |
| 56 | C.P. flange(Big) |
| 57 | C.P. waste. (32mm -5\\" long) |
| 58 | C.P.soap holder |
| 59 | Liquid Soap container |
| 60 | CP Jet spary with 1.0 1 RM PVC Tube |
| 61 | 110 mmdia UPVC SWR Pipe (Type B) |
| 62 | 75mm dia U-PVC SWR pipes (Type B) |
| 63 | 75x75x75 mm dia UPVC Plain Shoe Bend 450 |
| 64 | 110mm dia P.V.C. SWR S Trap |
| 65 | 110 mm dia P.V.C. SWR Vent Cowl |
| 66 | Porcelain Flat back standing Urinal (Medium) |
| 67 | 550mm x 400mm wash hand basin (Hindware/Parryware/Neycer/ CERA) |
| 68 | Bevelled Edge Mirrior |
| 69 | C.I. Basin Bracket in pair |
| 70 | Hindware Prima Floor Mount One Piece EWC Western Commode |
| 71 | (Digging of Borewell)Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge |
| 72 | Supplying all labour, tools and plants and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per the direction of Engineer-in-charge |
| 73 | Supplying all labour, tools land plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer-in-Charge. Reaming 100mm to 150mm diaFrom 0 to 360 metres |
| 74 | Reaming 150mm to200mm diaFrom 0 to 360 metres |
| 75 | Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the positioin and removing the same after use all complete as per direction of Engineer-in-Charge. |
| 76 | Supplying all labour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge125mm dia PVC casing pipe- From 0 to 360 metres |
| 77 | Cost of 125mm dia PVC ASTM Pipe(Schedule-80) |
| 78 | Cost of 125mm dia PVC well screen |
| 79 | Cost of 125mm dia C.I.Cutter plug |
| 80 | Cost of Bentonite powder |
| 81 | Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc all complete as per the direction of the Engineer-in-charge |
| 82 | Supplying all materials,labour T&P and packing the bore with river sand over the gravel pack etc.all complete as per the direction of the Engineer-in-charge. |
| 83 | Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 150 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge. (Excluding the cost of cement) |
| 84 | Cost of Cement |
| 85 | Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge.Fixing of 1.5 HP submerssible pump set. |
| 86 | Supplying all materials,labour,T&P and providing,fitting and fixing submerssible pump with squirrel cage induction type submerssible type submnerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS 8034/89 with following specifications with suitable control panel,jointing with GI/PVC/HDPE pipes,electrification, testing, commissioning,trial running, conveyance of all materials to worksite,payment of taxes etc.all complete as per specification and direction of the Engineer-in-charge.1.5 HP single phase(vertical submerssible pump motor)3 stage head range 20 to 35 metres discharge 145 to 110 LMP with outlet dia of 25mm |
| 87 | DOL Control pannel |
| 88 | 2.50 sqmm flat cable |
| 89 | 20mm dia rigid UPVC Pipe |
| 90 | Steel rope with cover |
| 91 | Well cap |
| 92 | 50mm size CI Bracket |
| 93 | 32mm dia Steel short piece |
| 94 | Labour charges for lowering including transportation |
| 95 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS:4989/2000(10kg/sqcm) of the following nominal bore with clamps and jointing by fusion welding method including testing,making good the wall ceiling and floor all complete as per specification and direction of the Engineer in charge32mm dia HDPE Pipe |
| 96 | Providing and fixing (UPVC) ASTM-D pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25mm dia UPVC ASTM Pipe(Sch-80) |
| 97 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge25mm dia Brass or gunmetal fullway valve |
| 98 | (Electrification)Standard earthing as per Govt. specification |
| 99 | Supply & Laying 25mm x5mm G.I strip on surface or in recess for connection etc as required |
| 100 | Supply and fixing of 0.5Amp to 32A rating 240 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ C&S)6Amp rating to 32Amp (SP)MCB |
| 101 | 32Amp rating (DP) MCB |
| 102 | Supply and Fixing of 30 watt(4') LED Tube light fitting. (Make- Havells/ Phillips/ Crompton) |
| 103 | Supply and fixing 20 watt LED Flood light fitting. (Make- Havells/ Phillips/ Crompton) |
| 104 | Supply and fixing of changeover switch. (Make- L&T/ Havells/ C&S/ HPL)63Amp 3 Pole Nuetral |
| 105 | Supply and fixing of following fan.A.C Ceiling fan 48\\" size. (Make-Polycab -Vital/ Crompton -Jura/ Havells-Velocity) |
| 106 | Exhaust fan 10\\"/12\\" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton) |
| 107 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.Group-C L.P- 8 F.P- 3 C.B.P-1 |
| 108 | Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 109 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 110 | Supply and fixing of Electronics step type Modular fan regulator. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 111 | Supply and fixing of Modular switch ,Socket , T.V Socket and Telephone socket etc. (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) 16Amp switch (Modular type ) |
| 112 | 16Amp socket.(Modular type ) |
| 113 | T.V Antenna socket (Modular type ) |
| 114 | 32Amp Modular DP switch |
| 115 | Call bell push Modular type |
| 116 | Unforseen Ittem Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender