Tender For Comprehensive Maintenance To Joinery,Flooring, Plastering, Sanitary And Plumbing, Periodical Services Incl Welcome Maintenance And Other Associated Work At Rms Dholpur
Tender Value
49 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
4 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharatpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Joinery,Flooring, Plastering, Sanitary And Plumbing, Periodical Services Incl Welcome Maintenance And Other Associated Work At Rms Dholpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubing down with water etc complete all as specified. |
| 2 | M&L for rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work or on one side of lathing in cement mortar 1:6, finished even and fair complete all as specified. |
| 3 | M&L rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilling surfaces complete all as specified. |
| 4 | M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished even and smooth without using extra cement on edges/ Chajjas/Roof projection and simlar courses etc complete all as specified. |
| 5 | M&L for 1.5 mm thick wall care Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified. |
| 6 | M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified. |
| 7 | M & L preparation of newly plastered surfaces and applying three coats of white wash in ceiling complete all as specified. |
| 8 | M&L Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified. |
| 9 | M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified. |
| 10 | M&L for Two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) over old plastered , over & including 1.5mm thick wall care putty on Wall after sand paper gentle rubbing to obtain smooth surfaces including all necessary arrangement for execution of work complete all as specified. |
| 11 | M&L for applying two coats of cement base paint over old plastered surfaces with using hand roller complete all as specified. |
| 12 | M&L for applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint over a coat of exterior primer complete all as specified. |
| 13 | M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified. |
| 14 | All as item No 13 above but applying one coat of white wash on ceiling complete all as specified. |
| 15 | M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified. |
| 16 | M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified. |
| 17 | M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified. |
| 18 | M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified |
| 19 | Taking down chowkhats or frames incl steel windows & ventilators not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified. |
| 20 | Taking down chowkhats or frames exc. 1.5 sq. M but not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified. |
| 21 | Taking down shutter of any description area exc 1 sqm and n. exe 2 sqm and removing from the site complete all as specified. |
| 22 | Taking down door/window shutters easing & adjusting, refixing in same opening of any description not exc. 1 sqm each complete all as specified. |
| 23 | All as item 22 above but exc 1 sqm and not exc 2 sqm each complete all as specified. |
| 24 | Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (M.S hold fast/lugs or SS dash fasteners shall be includedin the rate quoted by contractor) |
| 25 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified.(Note: butt hinges shall be paid separately) |
| 26 | S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified. |
| 27 | S&F 125 mm Aluminium handles, cast type,anodised complete all as specified. |
| 28 | S&F 150 mm Aluminium anodised,barrel tower bolts of extruded section complete all as specified. |
| 29 | S&F in Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, doors chowkats of angle, ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 complete all as specified. |
| 30 | S&F 2nd class hardwood 35 mm thk Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 complete all as specified.(a); supplied and fitted to chowkats. |
| 31 | providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified. (M.S hold fast/lugs or SS dash fasteners shall be included in the rate) |
| 32 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified.(Note: butt hinges shall be paid separately) |
| 33 | S & F Mild steel pressed handles oval type size 150 mm , stove enamelled black of complete all as specified. |
| 34 | S & F 200 mm long mild steel tower bolts, stove enamelled black, with bright bolt complete all as specified. |
| 35 | S & F mild steel sliding door bolt 300mm long, plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a min of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified. |
| 36 | Welding in repairs n.exc 5 cm in length and not exc. 9mm in thickness to steel windows, Ventilators,doors and Steel Chowkhats etc complete all as specified. |
| 37 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified. |
| 38 | S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane complete all as specified. |
| 39 | S&F 3.00mm thick Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side and glazing with oil putty in square n'exc 0.5 sqm in each pane complete all as specified. |
| 40 | S&F in repair galvanised Mild steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified. |
| 41 | S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified. |
| 42 | M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. Please Enable Macros to View BoQ information |
| 43 | M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender