Tender For Repair To Black To Road, Path, Culverts And Road Furniture And Road Sign Board At Parade Ground And Sewar Fort Bharatpur
Tender Value
90 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
27 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharatpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Black To Road, Path, Culverts And Road Furniture And Road Sign Board At Parade Ground And Sewar Fort Bharatpur
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surface in area n.exc 400 sqm & depth exc.50 mm but n.exc.100 mm deep complete all as specified. |
| 2 | M&L 15 cm thick (compacted thickness) WBM for disturbed portion of road with coarse aggregates (lime/sand stone, flint or quartzite) of grading 1 (90 to 40 mm size), spread, rolled and consolidated to gradient, camber and super elevation required to match with existing surface rolled with 8-10 ton power roller applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density complete all as specified. |
| 3 | All as item No. 02 above except stone aggregate complete all as specified. |
| 4 | M & L for applying evenly a tack coat @ 10 Kg/10 Sqm with bituminous primer paving bitumen of grade VG-10 complete all as specified. |
| 5 | M&L for preparing surfaces of unsurfaced WBM, by brushing with wire brushes for removing cacked mud etc. sweeping with brooms and finaly fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified. |
| 6 | M & L preparing the existing black topped surface by brushing with wire brushes for removing cacked mud etc. Sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a tack coat with bitumenouns primer @ 5 kgs per 10 sqm of paving bitumen of grade VG -10 complete all as specified. |
| 7 | Providing and laying bituminous concrete with 30 mm thick of 100-120 TPH batch type hot mix plant producing an avarage output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.5 percent of mix and filler cement @ 2% by weight of total mix, transporting the hot mix to work site laying with a mechanical paver finisher to the required grade level and tandem rollers to achieve the desired compactions including priming tack coat of paving bitumen (VG-10) @ 5.0 Kg per 10 sqm after preparation of surface, complete all as specified.Notes :- (i) Filler for bituminous concrete shall be cement @ 2% of total mix.(ii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items.(iii) Work shall be executed as per design mix approved by GE. |
| 8 | M&L Premix bituminous, macadam mixed with paving bitumen 4% binder (Viscosity grade VG-30) contents any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 10 Ton power roller complete all as specified. |
| 9 | M & L for applying 2.5mm thick thermoplastic road marking compound of white/yellow of approved make, shade, for road marking of any width & girth & painting lines, dashes, arrows etc n.exc 10cm wide on bitumen road/pavement & on concrete surfaces using hot processor plant including removing old paint by paint remover of burning of blow lamps & cleaning with scrapers for removing all durt /dust & other foreign matters at site & managing traffic control etc complete all as specified.Make: Apcotrack of Asian or equivalent in Shalimar/Berger lewis/Nerolac/Johnson & Nicholson. |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy of 100mm x 100mm x20mm with PAMA striplens reflector of model No.972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender