Tender For Provn Of One Sentry Post At Main Gate Of 617 (I) Ad Bde At Station Hq Complex Under Ge (A) Baroda.
Tender Value
1.85 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
3700
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of One Sentry Post At Main Gate Of 617 (I) Ad Bde At Station Hq Complex Under Ge (A) Baroda.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5m depth & 1.5m wide getting out in soft/loose soil. |
| 2 | M&L cement concrete type D2 1:4:8(using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 3 | M&L for RCC 1:2:4 type B0 (12.5 mm graded stone aggregate) foundations, including raft footings foundation beam, plinth beams, base of column, pillars and mass concrete etc |
| 4 | M&L for RCC 1:2:4 type B0 (12.5 mm graded stone aggregate) columns, pillars, piers, posts and struts etc. |
| 5 | M&L for RCC 1:2:4 type B0 (12.5 mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span |
| 6 | M&L for RCC work 1:2:4, type B1, using 20mm graded stone aggregate as in Roof Slab. |
| 7 | M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 8 | M & L Mild steel TMT bars 5mm dia and over up to and including 10 mm dia in stirrups space and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing. |
| 9 | Used and waste of formwork to sides of concrete in foundation footings bases of columns, rafts and beams, sides and soffits (if any) of foundation of flat rough finished surfaces of concrete. |
| 10 | Same as per item No 9 above but sides of columm,pillars etc. |
| 11 | Used and waste of formwork to soffits of suspended slab such as roof slab , floor slab, landing and similar work all as directed. |
| 12 | M & L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 13 | M&L rendering 10mm thick on fair faces of brick/concrete surfaces as in CM 1:4 & finished even & smooth. |
| 14 | M&L for rendering 5mm thick on fair faces of concrete surfaces on ceiling with CM (1:3) |
| 15 | M&L rendering 15mm thick on other then fair faces of brick/concrete surfaces as in CM 1:6 & finished even & fair. |
| 16 | M&L hardcore with broken stone or boulders of gauge n.exc. 63mm deposited, spread and leveled in layers n. exc. 15cm thick watered and rammed to a true surface. |
| 17 | M&L PCC 1:3:6 type C1 (20mm graded stone agg) as in coping,plinth courses, incl necessary form work. |
| 18 | Returning filling in incl spreading levelling watering & well ramming in layers n exc 25cm in any type of soil. |
| 19 | Removing excavated material n exc 50m & depositing where directed at a level n exc 1.5m above the starting point. |
| 20 | M&L for PCC 1:4:8 type D2,(40mm graded stone aggregate) 75 mm thick as in sub base floor/levelling course. |
| 21 | M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of morter 15mm thick for laying floor finishes with CM 1:6 |
| 22 | M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 23 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 24 | S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size |
| 25 | S & F 200mm size aluminium anodised, barel tower bolt of extruded section. |
| 26 | S & F 150mm aluminium alloy handles, fabricated type anodised |
| 27 | S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 28 | S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 29 | S & F powder coated aluminium window and ventilator shutters, side hung type aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, sash bars, glazing clips, rubber neoprene packing, handles 01 No in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc. complete, all as specified. |
| 30 | M & L for 4.0mm thick sheet glass, figured quality and glazing with rubber beading or with glazing clips, all as specified and directed. |
| 31 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 32 | M&L 75mm thick in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection. |
| 33 | M&L for preparation of new plastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer - in – Charge |
| 34 | M & L preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer ove a coat of 1 mm thick water proof wall care putty, complete, all as speicfied and directed. |
| 35 | M & L for preparation of newly plastered surfaces and providing two coats of OBD over a coat of primer as in ceiling all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender