Tender For Annual Maintenance Of Works At I.A. Amausi Distt- Lucknow

Sharing tender

Tender For Annual Maintenance Of Works At I.A. Amausi Distt- Lucknow- 1 Surface Dressing Of The Ground Including Removing Vegetation And In- Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M. 2 Tractor With Trolly Includong Cp And Pol 3 Supply Of Majdoor/Beldar/Dresser ( Unskilled ) 4 Jcb Machine With Pol And Driver 5 Dewatering Works 6 Tractor Trolly Water Tanker For 8 Hr Including Driver And Fuel 7 Providing And Installing Submersible 8 Complete Maintenance Of Park 9 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level 1:4:8 10 R.C.C Work With Cement Approved Course Sand And 2 Cm (3/4\) Gauge Approved Stone Ballast In The Proportion Of 1:1.5:3 In Lintels Of Doors And Windows Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Bending The Same With 24 B.W.G. G.I. Binding Wire And Including Neccessary Centering And Shuttering Etc. And Also Including Supply Of All Materials, Labours And T & P Etc. Required For Proper Completion Of The Work. Binding Wire Cost Being Included In The Item. 11 Mild Steel Or Iron In Plan Work Shch As Reinforced Concrete Or Reinforced Brick Work (When Not Included In Over All Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage Bend Hooks And Authorized Overlapping Shall Be Measured Up To Floor Two Level. 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For: Foundations, Footings, Bases For Columns 13 Hard Drawn Steel Wire Fabric 75 X 25 Mm Mesh Of Weight Not Less Than 7.75 Kg/Sqm 14 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 45X45X5 Mm, Joints Mitred And Welded By Angle Iron 45X45X5 Mm Or 45X 5 Mm. Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Aprroved Steel Primer, All Complete As Per Engineer In Charge