Tender For Road Safety Work At The Critical Crash-Prone Location Identified By The Save Life Foundation—Situated Near Sarsena Pasi Basti On The Ghazipur-Azamgarh Road (Sh-67).
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
4 days left
EMD
49000
Bank guarantee accepted
Document Fee
767
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mau → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Safety Work At The Critical Crash-Prone Location Identified By The Save Life Foundation—Situated Near Sarsena Pasi Basti On The Ghazipur-Azamgarh Road (Sh-67).
BOQ
| Sl. No. | Item Description |
| 1 | Reflective Signs (Type IV Sheet). for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, almunium composite panel (ACP) as base board micro prismatic retro-reflective sheet and electro cul coloured overlay film latex printing The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shal be more than one Sqm and each panel shall be braced diagonally (one way only) with MS angle The MS frame module shall have length not more than 3 mtr. The aluminum.composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminium on both sides The ACP shall be fixed on the MS frame with pop niveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame On the front So visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM D 4956-09 shall be pressure fixed. The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded while quoting tender. The rate shall include all materials, labour, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the Engineer-in- Charge Signage on MS angle frame of (35x35x5)mm (Accident prone zone) |
| 2 | Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-refectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high intensity grade sheeting vide clause 801 3 ticed over aluminum sheeting type IV 1.5 mm thick supported on a mid steel angle won post 75 mm x75 mm x6 mm famly fixed to the ground by means of property designed foundation with M 15 grade cement concrete 45 cm 145 cm00 cm 60 cm below ground level as per approved drawing The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of govemment report shall be uploaded while quoting tender.( 90 cm high octagon stop sign board) |
| 3 | 90 cm equilateral tringle with diffinitation plate size (20cm x 60cm) Rumble strips sign board, inter section ahed sign board at SH. |
| 4 | 60 cm circular with diffinitation plate (20cm x 60cm) speed limit board at SH |
| 5 | Provision of rumble strips coverd with primix bituminous carpet, 15-20 mm higt at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking paint. |
| 6 | Macking speed Table.At Ghazipur Azamgarh Rd (SH-67) on each side and center between junction including all complete |
| 7 | Providing and laying of hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, Thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35-2015 The finished surface to be level, uniform and free from streak and holes For Bar Barking |
| 8 | Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes For Zebra Crossing |
| 9 | Reflective Raised Pavement Markers (Road Studs / Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrite) or HIPS ( impact Polystyrene) or acrylonitrile butadiens styrenc (ABS) The marker shall supported a load of 1335 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 351 5° to base and area of each retro-reflecting surface shall not be less than 130 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer Dimensions of road studs should not be less than 100 mm x 100mm x10mm.RMP (with Shank) as per ASTM Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender