Tender For Repair/Replacement Of Internal Wiring And Light Fitting At Md & Otm Accn At Afs Amla
Tender Value
35 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Internal Wiring And Light Fitting At Md & Otm Accn At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper /aluminium point wiring complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc.complete all as specified and directed. |
| 2 | Taking down old unserviceable distribution board SPN DBs/ TPN DBs including old unserviceable MCCBs/ MCBs, isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 3 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit complete all as specified and directed. |
| 4 | Taking down ceiling / exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard complete all as specified and directed. |
| 5 | M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable FRLSH passing through PVC casing caping including accessories and provision of PVC box or mild steel sunken box (as per site requirement) for mounting of modular switches & sockets as required at site including PVC insulated multistranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for One light/fan point controlled by one, one way switch 5 Amps |
| 6 | All as per item No 05 above but one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed. |
| 7 | All as per item No 05 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 8 | All as per item No 05 above but one bell point controlled by one, bell switch 5 Amps complete all as specified and directed. |
| 9 | All as per item No. 5 above but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 10 | M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 marked drawn through in and including heavy duty grade (ISI marked) PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the One light/fan point controlled by one, one way switch 5 Amps. |
| 11 | All as per item No 10 above but one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed. |
| 12 | All as per item No 10 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 13 | All as per item No 10 aboove but one bell point controlled by one, bell switch 5 Amps complete all as specified and directed. |
| 14 | All as per item No. 10 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 15 | All as per item No. 10 above but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 4.0 sqmm FRLS PVC insulated copper conductor cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. (for AC Point) |
| 16 | S & F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and direcetd. |
| 17 | S & F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed. |
| 18 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 19 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 20 | S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 21 | S & F bell push modular 6 Amps single module complete all as specified and directed. |
| 22 | S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 23 | S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 24 | S & F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 25 | M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 26 | M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 27 | S & F sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 28 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 29 | S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 30 | S & F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 31 | S & F MCB single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 32 | S & F ceiling fan 230V, 50 Hz AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 33 | S & F exhaust fan, steel body AC single phase 230 Volts of size 300mm sweep with, blades, frame and louvers with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 0.75 Sqmm three core from ceiling rose to exhaust fan for connection complete all as specified and directed. |
| 34 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of size 0.75 sqmm complete all as specified and directed. |
| 35 | S & F LED light fitting 1x10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of size 0.75 sqmm complete all as specified and directed. |
| 36 | S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light, in warm white/cool day light or combination colour connecting up with three core flexible copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 37 | S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and necessary mounting arrangements alongwith provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 0.75 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. |
| 38 | S & F in repair LED luminaire 600 mm x 600 mm size, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light, in warm white/cool day light or combination colour complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 39 | S & F in repair LED luminaire round/square shape, 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light, in warm white/cool day light or combination colour complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 40 | Fixing only in repair LED fitting of any type/ capacity complete with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note: Light fitting shall be issued to contractor free for fixing under Schedule 'B'. |
| 41 | Fixing only in repair LED post top lantern fitting of any type/ capacity complete with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note: Light fitting shall be issued to contractor free for fixing under Schedule 'B'. |
| 42 | Material and labour for GI tubing light grade size 40mm bore, laid in trenches/fixed to poles, walls etc as protection to cable all as specified and directed. |
| 43 | Supply and fixing or passing through pipe/pole PVC insulated flat twin core 4.0 Sqmm unsheathed aluminium conductor complete all as specified and directed. |
| 44 | Supply, laying, connecting and testing of XLPE insulated PVC sheathed armoured cable 2 core x 10 Sqmm, 1100 volts grade heavy duty with stranded aluminium conductor including aluminium lugs/thimbles of suitable size and gland packing complete all as specified and directed. Note: Earth work, DWC pipe will be measured and paid separately. |
| 45 | Supply and laying HDPE DWC pipe size outer dia 50 mm, inner dia 38 mm for LT cable protection including sockets, bends etc complete all as specified and directed. |
| 46 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying cables and getting out in soft/loose soil complete all as specified and directed. |
| 47 | Returning filling in excavated soil including spreading levelling and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 48 | Removing surplus excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as directed and directed. |
| 49 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender