Tender For Road Safety Civil Work On The Road Of Pharenda Vidhan Sabha Under Zero Faitelity District Yojna. (Lot No. 2/2)
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
9 days left
EMD
55000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maharajganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Civil Work On The Road Of Pharenda Vidhan Sabha Under Zero Faitelity District Yojna. (Lot No. 2/2)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 mExcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 sr.no. 3.5 (iii) (Including Labour Cess & GST will be paid extra as applicable) |
| 2 | Construction of Embankment with approved Material Obtained from Borrow Pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead up to 1000m. as per Technical Specification Clause 301.5 (3.4) (Including Labour Cess & GST will be paid extra as applicable) |
| 3 | Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with a lead up to 1000m as per Technical Specification Clause 303.1. (3.14) (Including Labour Cess & GST will be paid extra as applicable) |
| 4 | Granular Sub-base with Well Graded Material (Table 400.1) (A)By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Sr.No. 4.1(A)(i) For Grading I Material. (Including Labour Cess & GST will be paid extra as applicable) |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. Sr.No. 4.7(2)(A) By Manual Means. (Including Labour Cess & GST will be paid extra as applicable) |
| 6 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Sr.No. 4.7(3) (A) By Manual Means. (Including Labour Cess & GST will be paid extra as applicable) |
| 7 | Brick edging on both sides of the road of first class bricks 8cm. (3\\") wide and 12cm. (4.5\\") deep laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing ramming the excavated earth as directed by the Engineer-in-charge.(S.I. No. 765) (Including Labour Cess & GST will be paid extra as applicable) |
| 8 | Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Sr.No. 5.1(i). (Including Labour Cess & GST will be paid extra as applicable) |
| 9 | Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. Sr.No. 5.2(iv) (Including Labour Cess & GST will be paid extra as applicable) |
| 10 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case - I By Manual Means (I) Bitumen (S-90) (Including Labour Cess & GST will be paid extra as applicable) |
| 11 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A. By Manual Means Case - III : Type C (I) Bitumen (S-90) (Including Labour Cess & GST will be paid extra as applicable) |
| 12 | Providing and applying tack coat with bitumen (VG-10) grade using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (As per MORTH Specification.) (Including Labour Cess & GST will be paid extra as applicable) |
| 13 | Dense Graded Bituminous Macadam grading iiProviding and laying dense graded bituminous macadam with Higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 percent by weight of total mix and filler, fransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. (Including Labour Cess & GST will be paid extra as applicable) |
| 14 | BC-Providing and laying bituminous concrete (Grade-2) with higher capacity batch type hot mix plant 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. as per MORTH specification 507 (B), Sr No. 5.05 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable) (Including Labour Cess & GST will be paid extra as applicable) (Including Labour Cess & GST will be paid extra as applicable) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender