Tender For Mtps-Ii - Es Circle - Tgm & Ca Division - Overhauling And Gasket Renewal Of Stator Water Coolers, Overhauling Of Ccw Inlet & Outlet Valves Of Swcs & H2 Coolers, Generator Stator Water Pumps - A&B , Seal Oil Pump -B, Seal Oil Vacuum Pump An
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
8 days left
EMD
4300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps-Ii - Es Circle - Tgm & Ca Division - Overhauling And Gasket Renewal Of Stator Water Coolers, Overhauling Of Ccw Inlet & Outlet Valves Of Swcs & H2 Coolers, Generator Stator Water Pumps - A&B , Seal Oil Pump -B, Seal Oil Vacuum Pump And Cleaning Of Plant Air Compressor Coolers, Driers & Receiver Tanks During The Capital Overhaul - 2026
BOQ
| Sl. No. | Item Description |
| 1 | Overhauling & gasket renewal of Stator water cooler and CCW inlet and outlet valves of stator water coolers. a)Dismantling of stator water coolers, CCW boxes covers in both sides of stator water coolers, water boxes, cleaning of tubes, plugging of tubes if necessary, painting the inner side of cooling water boxes by anti-corrosive black paint, replacing the 12 x12mm HR rubber cord with new one and reassembling of the water boxes including the cost of materials. |
| 2 | Hydraulic test of stator water coolers to ensure the healthiness of the cooler. |
| 3 | Assembling the stator water coolers CCW boxes covers, replacing 5mm thickness HR Rubber Gasket with new one and satisfactory commissioning including the cost of materials. |
| 4 | Complete overhauling of Generator Stator water pump (Primary water pumps). |
| 5 | Overhauling of CCW Inlet & Outlet Butterfly valve (DN200mm) in Stator water system. |
| 6 | Overhauling & Gasket renewal of CCW Inlet & Outlet Hand operated Gate valve (DN 150mm) in H2 cooler. |
| 7 | aGasket renewing for 150 mm hand operated gate valve in H2 coolers, this work involves Removing the valve from line, Cleaning The flange surface on both sides, Preparation of gaskets for both ends, positioning the valve in the Line with gaskets and tightening the flange bolts & nuts. |
| 8 | Complete overhauling of Generator AC Seal Oil pump with mechanical Seal. |
| 9 | Complete overhauling of Generator Seal Oil Vacuum pump. |
| 10 | Plant compressor Inter cooler, After Cooler cleaning work. a)Dismantling /Assembling the Inter cooler / After Cooler bunch then checking for leakage & plugging the leak tubes. Inclusive of Hydro test. |
| 11 | b)Dismantling the oil cooler after isolation of cooling water line. Cleaning of tubes Reassembly of the tube bundle with renewal of ‘O’ ring /gasket. Normalization of the cooling water lines. cleaning oil spillage in the compressor completely. |
| 12 | Labour charges for cleaning of After Filter & Pre Filter of Drier, changing the Filter. Opening /Fixing of the outer cover of the Pre filter & After Filter. Removing the ceramic filter candle out of the filter casing, checking the ceramic candle if the blockage is less the candle should be cleaned by the petrol or it is found that the blockage is very high candle should be changed. Cleaning the inner surface of the filter casing, fixing the new/cleaned filter in the position. |
| 13 | Carrying out renewal of Manhole door gasket and overhauling of safety valves of Air receiver Tanks. This work also provides the manhole door gaskets were cut into required size and placed in the door seating area and ensure no air leak was observed during the service. Dismantling the safety valves, inspection and cleaning of the internals, reassembling the valve with the renewal of gasket. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender