Tender For Repair /Maintenance Of Ht Distribution Network Of 33 Kv And 11 Kv And Maintenance Of Rmus At Bb Cantt Srinagar Under Ge 864 Ews
Tender Value
48 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
8 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair /Maintenance Of Ht Distribution Network Of 33 Kv And 11 Kv And Maintenance Of Rmus At Bb Cantt Srinagar Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying, jointing, testing and commissioning of High Tension (HT) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty, earthed electric power cable, cross sectional area 300 Sqmm 3.0 core aluminium conductor 33000 Volts grade under ground cable including both side connection with cable lugs etc., laid in trenches, along poles or passing through pipes or laid under floor or through roads etc., complete all as specified and directed. |
| 2 | Supply, laying, jointing, testing and commissioning of High Tension (HT) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty, earthed electric power cable, cross sectional area 240 Sqmm 3.0 core aluminium conductor 33000 Volts grade under ground cable including both side connection with cable lugs etc., laid in trenches, along poles or passing through pipes or laid under floor or through roads etc., complete all as specified and directed. |
| 3 | Supply, laying, jointing, commissioning in replacement 11000 Volts (earthed) grade aerial bunched cable with 3 (three) power Cores standard, compacted circular aluminium conductor 95 Sqmm screened with black extruded semi-conducting compound, natural collared XLPE insulated core screened with Black extruded semi-conducting compound and one layer of copper tape and covered with black extruded PVC (Core identification by ridges one, two and three over PVC covering) and one bare messenger wire 95 Sqmm ( combination of galvanized steel wire and Al. Alloy wires including fixing of suitable size of clamps), complete all as specified and directed. |
| 4 | Supplying, laying or fixing, jointing and testing in repair/ renewal of unserviceable HT under ground electric power cable, XLPE insulated, screened , PVC bedded, galvanised steel strip or wire armoured, (conforming to ISI-7098), ISI Marked, with aluminium conductor multi stranded, heavy duty, 11000 Volts grade (earthed),cross sectional area 95 sq. mm 3 core laid in trenches/laid under floor, roads, paths or fixed on walls /on poles/in ducts etc. complete all as specified and directed. |
| 5 | All as per ser Item No. 4 here-in-before but 120 sqmm x 3 Core |
| 6 | S&F in renewal of unserviceable tubing 'light grade' galvanised iron with all fittings including fixing on poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads 150 mm bore complete all as specified and directed. |
| 7 | All as per Ser Item No. 6 here-in-before but 80 mm bore |
| 8 | Excavation in trenches n. exc. 1.5 mtr in width and n. exc. 3.0 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed. |
| 9 | Excavation in trenches n. exc. 1.5 mtr in wide and exc. 1.5 mtr but exc 1.5mtr in depth for laying of underground cable/errection of HT pole and getting out in soft/loose soil complete all as specified and directed. |
| 10 | Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed. |
| 11 | Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 12 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 13 | Supply and laying unreinforced precast concrete cable cover on the cable in the trench, class HV, type-I, flat size 300mm X180mmX40mm (for 11KV HT cable) complete all as specified and directed. |
| 14 | M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc. including excavation of any strata & relaxing taken out cable complete all as specified and directed. |
| 15 | M&L PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) in coping / plinth blocks for poles and the like including weathering , slightly rounded or chamfered angles and throating, as directed including necessary steel form work and finishing the surfaces fair in forms complete all as specified and directed. |
| 16 | Repair/ maintenance of RMU 3 way by taking shut down and dismantling RMU, vaccumization of the gas unit with the help of charging line assembly suitable to match with RMU gas pipe complete and charging of SF6 gas - 6 Kgs, removing hard carbon deposited due to flash over on bus bars and insulators with CRC/ Stanvac carbon remover, making HT connections, checking the trip/ isolation operations, meggering the insulators, assembling the RMU, testing commissioning complete and clearing shut down all as per entire satisfaction of Engineer- in-Charge. |
| 17 | M&L for calibration and complete programming of 11 KV, RMU 3 Way /5 Way, PF, AMP and all multifunction meters on different settings and as per the CTR Ratio, checking the DC/AC supply, protection relay of VCB, cable bushing I/C and O/G cables, fuse unit, mechanical/ interlocking system for safe operation, operating mechanism, checking of battery, servicing of LBS and VCB and make functional of all supply all as per entire satisfaction of Engineer in charge. |
| 18 | Taking shut down and dismantling all defective parts of CSS from the Air Circuit Breaker of LT side and replacing with new gear motor suitable for 110/125V AC- 01 No.as per existing make and size, auxiliary Isolating contact assembly consisting of one contact block on ACB side & two blocks on cradle side.- 01 No., power supply module for ACB. - 01 No., including cleaning of complete LV side and HV side with air blower ,cutting of burnt/ overheated LT cable and thumbing new cable properly with MCCB complete all as specified and directed. |
| 19 | S&F insulator fiber Pin type heavy duty insulator for 33000 Volts grade, including 01 galvanized M.S.spindle, two galvanised iron washers and one galvanised iron nut straps etc. including taking down old unserviceable insulator complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F disc type, insulator three in series, porcelain, vitreous, 145mm height and 255mm dia ball and socket type, white brown or green, single disc assembly for tension with tension clamps for conductors, working pressure 11000 Volts with GI nut, bdfs straps etc. including taking down old unserviceable insulator complete all as specified and directed. |
| 21 | M&L pin type, fiber type heavy duty insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 Volts grade including taking down old unserviceable insulator complete all as specified and directed. |
| 22 | M&L in repair/ renewal of Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of pain complete all as specified and directed. |
| 23 | S&F in renewal of old unserviceable steel tubular swaged poles type 410 SP-55, 11.00 meter long, complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint heat resistant type over one coat of red oxide primer and making 06 Nos bands/straps with white and black colour (30 cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black bituminous synthetic enamel paint in 2.5 cm height including tarring one coat on steel surface embedded in concrete foundation complete all as per specified and directed. Please Enable Macros to View BoQ information |
| 24 | S&F in renewal of old unserviceable steel tubular swaged poles type 410 SP-55, 11.00 meter long, complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint heat resistant type over one coat of red oxide primer and making 06 Nos bands/straps with white and black colour (30 cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black bituminous synthetic enamel paint in 2.5 cm height including tarring one coat on steel surface embedded in concrete foundation complete all as per specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender