Tender For Addition Alteration To Single Officer Accommodation At 25 Wg Under Ge (Af) Gurgaon
Tender Value
43.74 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
16 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Single Officer Accommodation At 25 Wg Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down complete existing water proofing treatment of any description over roof slabs / parapets etc complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position including padding concrete etc all as specified and as directed |
| 3 | M&L for providing PCC 1:2:4 type B0 using 12.5mm graded stone aggregates as in levelling/ padding course on roof slab, projections on similar surfaces existing with slope, making the surface even and smooth without using extra cement. |
| 4 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green. at any height and making the surface fair and even without using extra cement incl using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately. |
| 5 | Supply only liquid water proofing compound |
| 6 | M&L for APP modified prefabricated polymeric membrane 3mm thick and weighing not less than 3.5 kg/sqm reinforced with non woven polyester matt black finished, weighing not less than 160 gm/sqm having softening point not less than 140 degree Celsius longitudinal tensile strength not less than 300N/Sqcm, side lap and end lap 10 cm with torch application of membrane, over compatible primer at the rate of 0.40 Ltr/Sqm and finishing with aluminium paint applied at the rate of 0.11 Kg/Sqm finished complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completes all as specified and as diercted. |
| 8 | M&L for cement plaster 15mm thick in cement mortar 1:6 to brick wall/concrete surface finished even and smooth without using extra cement all as specified and as directed |
| 9 | M&L 20mm thick rendering in cement mortar 1:4 in two layer (12+8mm) on fair faces of brick work or concrete surfaces, rendering finished even and fair (without using extra cement) mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer all as specified and as directed. Note:-WPC will be measured and paid separately as supply only. |
| 10 | M&L for cement plaster 5mm thick in cement mortar 1:3 to ceiling surface finished even and smooth without using extra cement complete all as specified and as directed |
| 11 | M & L for complete removal of existing treatment by scrapping with mechanical wall sander ( having mechanical vaccum mechanism) from old plastered surfaces of walls and providing and applying wall care putty (Putty to be measured seperately) over plastered surfaces to prepare the surface even and smooth and applying two coats of OBD over a coat of primer complete all as per manufacturer's instruction and as directed. |
| 12 | M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion on new surfaces over a coat of primer on walls over wall care putty (Putty to be measured seperately) complete all as specified and as directed. |
| 13 | M & L for complete removal of existing treatment by scrapping with mechanical wall sander ( having mechanical vaccum mechanism) from old plastered surfaces of ceiling and providing and applying wall care putty in two layers (Putty to be measured seperately) over plastered surfaces to prepare the surface even and smooth and applying two coats of OBD over a coat of primer complete all as per manufacturer's instruction and as directed. |
| 14 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion on new surfaces over a coat of primer on walls over wall care putty (Putty to be measured seperately) complete all as specified and as directed. |
| 15 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander ( having mechanical vaccum mechanism) from old plastered surfaces of walls and applying two coats of weather proof exterior emulsion (Anti fungal) paint over a coat of primer over and incl waterproof exterior wall care putty complete all as specified and as directed. |
| 16 | M&L for preparation of new surfaces and applying two coats of weather proof exterior emulsion (Anti fungal) paint on wall over a coat primer over and incl waterproof exterior wall care putty complete all as specified and as directed. |
| 17 | Applying 2mm thick wall care putty in two layers over plastered surfaces to prepare the surface even and smooth on walls as specified and directed. |
| 18 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each. |
| 20 | Taking down shutters of any description exc 2 sqm each and refixing in same opening after cutting, adjusting and easing as required. |
| 21 | S&F pressed steel frame of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified, supplied and fixed complete. |
| 22 | S&F pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified, supplied and fixed complete. |
| 23 | S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick wood grainprinted PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed. |
| 24 | S&F 35mm th, 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers. |
| 25 | S&F 35 mm thick 2nd hard wood factory made 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specified in SSR Part I sec 8 clause 8.24 (a) kiln seasoned and chemically pressure treated all as specified & directed |
| 26 | S & F 30 mm thick Factory Made Solid Core, Single Leaf PVC Moulded Door Shutters 28 to 30 mm thick (stiles), but 2 mm thick 3 D wood grains moulded PVC sheet polyurethene painted on front face and 2 mm prelam PVC sheet on back face with 2,4 or 6 raised panel design, supplying & fixing in frame at site as per specification & drawing |
| 27 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section of bolt all as specified & directed |
| 28 | S&F 150mm size aluminium anodised handles cast type all as specified & directed |
| 29 | S & F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-21 complete. |
| 30 | S&F 250mm MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate. |
| 31 | M & L for Floor door stopper of brass body and tongue, with hard drawn steel spring,fixed in floor length 150mm complete all as specified and as directed. |
| 32 | M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed |
| 33 | S & F M S 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 34 | M&L for preparation of new wood surface of any description , not otherwise described, over 10 cm width or girth and applying two coats of of synthetic enamel paint over acoat of pink primer all as specified and as directed. |
| 35 | M&L for preparation of old wood surface of any description , not otherwise described, over 10 cm width or girth and applying two coats of of synthetic enamel paint all as specified and as directed. |
| 36 | S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 \\"D\\" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series (Note : Glass and wiremesh shall be measured and paid separately under respective items) |
| 37 | S&F Sheet glass selected quality 5.5m thick glazing in square exc 0.5 Sqm each pane. |
| 38 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 39 | Dismantling wall and ceiling board fibre pulp insulation etc or insulation boards/ slabs blankets any thickness, including cover fillets/ frame. |
| 40 | M & L for clip in type armed strong metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , Angle or any other section as in grid type ceiling framework as approved by GE . Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n. exc 1m , the size of the metallic powder coated ceiling tiles 600 mm x 600 mm complete all as specified. |
| 41 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings |
| 42 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 43 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws |
| 44 | S & F 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including necessary welded joints as specified and as directed. |
| 45 | S&F 2mm thick Fibre glass reinforced translucent sheeting fixed with coach screw and washer in roof, wall etc. |
| 46 | Dismantling wrought iron or mild steel work of any description not other wise described |
| 47 | S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 48 | M&L steel work as in hand rails, wind ties for roof including securing bolts, posts and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 |
| 49 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 50 | M/L for preparation of old painted steel surfaces and steel based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and as directed. |
| 51 | Demolition of cement concrete in ground floor as paving n. exc 15 CM thickness (below of above ground level) complete all as specified and as directed. |
| 52 | M&L for 25 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate, complete all as specified and as directed. |
| 53 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removingnservicable tilesto store and rubbish off the premises. |
| 54 | M&L for Vitrified Ceramic Tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:4. complete all as specified and directed |
| 55 | Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointes in neat cenment slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for CM (1:4) for laying floor finishes. |
| 56 | M & L Coloured Glazed ceramic tiles in vertical surfaces 300x450mmx7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:3) complete all as specified and directed |
| 57 | Machine cut kota stone slab flooring,20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:4, rubbing, grinding and polishing, complete all as specified. |
| 58 | Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base as in riser, skirting, dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat in CM 1:4 complete all as specified. |
| 59 | M&L for Granite 20 mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone in floors, cooking plateform including cutting & polishing over 15mm thick screed in CM(1:4),all as specified and as directed. |
| 60 | M & L for rounding edges of stone slabs one edge, such as steps,cooking platforms and other similar situations, complete all as specified and as directed. |
| 61 | Supply and fix as in repair Vitreous China Rimless Single Piece wash down water closet pan, white with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting including fixing bolts, jet spray and also including 'P' or 'S' trap complete all as specified. Make of Pan Jaquar Cat No LYS-WHT-38853P180UFSM or equivalent make in Parryware/ Cera |
| 62 | Supply and fix as in repairs,15 mm bore two way Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.Make : Jaquar or equivalent in Parryware, Cera |
| 63 | S&F in repair 15 mm bore bib tap with flange fancy type chromimum plated screwed to 15 mm dia iron pipe screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 64 | S&F in repair 15 mm bore Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete as per manufacturer instruction. |
| 65 | S&F in repair Overhead Shower 150X150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including fixing to steel pipe or union complete as per manufacturer instruction. Make: Jaquar / Cera |
| 66 | Supply and fix as in repairs CP health faucet with 1 mtr tube and hook including all fittings as per manufacturer instruction.Make: Jaquar Cat No ALD-579 or equivalent in Parryware, Cera |
| 67 | Supply and fix as in repairs toilet paper holder as per manufacturer instruction.Make:- Jaquar Cat No ACN-CHR-1157 or equivalent Parryware / Cera |
| 68 | S & F in repiars soap dish complete all as specified and as directed. Make:Cat No.ACN-1131N of JAQUAR or Equivalent. |
| 69 | Supply and fix as in repairs 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified.Make:-Jaquar/ Parryware/ Cera |
| 70 | Supply and fix as in repairs Stainless Steel Towel Rack 600mm Long with Lower Hangers as per manufacture instruction.Make:-Jaquar/ Parryware/ Cera |
| 71 | Supply and fix as in repairs brass chromium plated tubular towel ring with brackets as per manufacture instruction.Make:-Jaquar/ Parryware/ Cera |
| 72 | S&F in repair CP Corner Glass Shelf fixed complete with Bracket as per manufacturer instruction. Make:-Jaquar Cat No. ACN-CHR-1173 or equivalent |
| 73 | S&F in repairs Premium vitreous china counter top wash basin of size 530x420x140 mm. The basin is to be mounted over a pre-finished stone/granite counter shelf using high-strength anti-fungal silicone sealant along the base interface. Item to include 32 mm C.P. brass waste coupling with pop-up or standard grating, heavy-duty C.P. brass bottle trap, connecting 32 mm dia flexible/rigid PVC waste discharge pipe concealed inside or behind the vanity layout, and making good the walls/junctions as required complete all as specified and as directed. (Note: Faucet tap to be measured and paid under a separate BOQ line item) Make: CAT No Jaquar Code- JDS-WHM-25907N or equivalent in HINDWARE/PARRYWARE/CERA as approved. |
| 74 | S&F in repairs Single Lever Basin Mixer without Popup Waste System with 600mm Long Braided Hoses complete as per manufacturer instruction.specified.Make:-Jaquar Cat No OPP-CHR-15005BPM or equivalent make in Parryware / Cera |
| 75 | S & F in repair fancy type chromium plated Angular Stop Cock with Wall Flange for 15mm bore of iron pipe or for union and fixed complete all as specified. |
| 76 | Supply and fix as in repairs 600 mm hot water connection pipe including nuts for geyser hose pipe as per manufacturer instruction |
| 77 | Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified. |
| 78 | Material and labour as in repair 150 mm x 150 mm of size stainless steel floor trap, square type flat slooted gratings with frame as per manufacturer instruction. |
| 79 | S&F in repair 600 mm x 450 mm x 5 mm th, bevelled edges looking mirror of selected quality glass mounted on 9 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete as per manufacturer instruction.Make: Sant Gobain/ Modiguard/ Prayag |
| 80 | S &F in repair PVC bathroom cabinet made out of ABS material of size 40x50cm complete as per manufacturer instruction |
| 81 | S & F in repairs sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. |
| 82 | S & F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete. |
| 83 | Demolition of brick work built in cement mortar complete all as specified. |
| 84 | M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified. |
| 85 | M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified. |
| 86 | M&L for Providing Precast cement concrete 1:2:4 type BO using 12.5mm graded stone aggregate in louvres and jallies 25mm thick (measured solid), including all mouldings set in cement mortar 1:6 complete all as specified and directed. |
| 87 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for such as RCC post, manholes, landings etc (reinforcement to be cut as required to facilitate demolition and removing debris to distance not exceeding 50m all as specified and directed. |
| 88 | Mild steel TMT bars 6mm to 8 mm dia, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 89 | M&L for Reinforced cement concrete type B1, 1:2:4, using 20mm graded stone aggregate for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 90 | Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed. |
| 91 | M&L for PCC 1:2:4 type B0 using 12.5mm graded aggregate, as in coping, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating incl necessary formwork complete all as specified and directed. |
| 92 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation and getting out in soft/loose soil all as directed and specified. |
| 93 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm soft/ loose soil all as directed and specified. |
| 94 | Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.50 mtr above the starting point all as directed. |
| 95 | Demolition and breaking up drain pipes salt glazed stone ware pipes 150 mm dia (internal) set in cement mortar. |
| 96 | Cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 97 | Material and labour for salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar 1:1 mixed with spun yarn and testing complete all as directed and specified. |
| 98 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound will be measured and paid separately. |
| 99 | M&L for Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed. |
| 100 | M&L for Precast reinforced cement concrete 1:1.5:3 type A1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes,septic tanks, soakage wells etc) , including placing in position and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately. |
| 101 | Dismantling water tanks capacity exc 250 ltrs but n.exc 500 ltrs and removing to store,. |
| 102 | M&L Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs. all as specified. |
| 103 | Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 104 | S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s all as specified and as directed. |
| 105 | S&F of 20mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, check nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed including taking down |
| 106 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, check nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed including taking down |
| 107 | S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 108 | S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 109 | Supply and fix in repairs PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed. |
| 110 | Supply and fix in repairs PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall all as specified and as directed. |
| 111 | S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 112 | S&F 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 113 | M&L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified. |
| 114 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 115 | S & F Chequered cement concrete colour tiles 30 cmx 30 cmx 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed. |
| 116 | M&L PCC type C-2, 1:3:6 (using 40 mm graded crushed stone aggregates) as in plinth protection/Path; 75 mm thick; finished even and smooth without using extra cement including demolition of damaged PCCcomplete all as specified and directed. |
| 117 | Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc complete all as specified and as directed. |
| 118 | M & L for concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :- |
| 119 | One light / fan point controlled by one way switch |
| 120 | One 5 Amp socket outlet on independent board. |
| 121 | One 5 Amp socket outlet on same board. |
| 122 | One bell/buzzer point controlled by one bell push |
| 123 | All as per above item No-2 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed. |
| 124 | S&F in replacement socket outlet 6A-2/3 Pin combined 2 module 240 volts AC 50 hz ISI marked modular type complete all as specified and directed. |
| 125 | S&F in replacement socket outlet 6A/16A-2/3 pin combined 2 module 240 volts AC 50 hz ISI marked modular type complete all as specified and directed. |
| 126 | S&F in replacement switch 6 amps modular type one one way 240 volts AC 50 hz ISI marked complete all as directed. |
| 127 | S&F in replacement switch 16 amps modular type one one way 240 volts AC 50 hz marked complete all as directed. |
| 128 | S&F in replacement modular type bell push 6 amp one module 240 volt ISI marked complete all as specified and directed. |
| 129 | S&F in replacement of bell DING DONG single pahse 230 volt complete all as specified and directed. |
| 130 | S&F in replacement of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed. |
| 131 | S & F in replacement of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length. |
| 132 | S & F in replacement of sub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.Common Note for Items (i) if the contractor fail to make good the disturbed surface of wall and do not match with existing surface of wall to the entire satisfaction of Engr-in-Charge a recovery of Rs 50 per RM shall be made from payment due to contractor. Please Enable Macros to View BoQ information |
| 133 | S & F in replacement of sub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 6.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 6.0 sqmm cable and one run of 6.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.Common Note for Items (i) if the contractor fail to make good the disturbed surface of wall and do not match with existing surface of wall to the entire satisfaction of Engr-in-Charge a recovery of Rs 50 per RM shall be made from payment due to contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender