Tender For Special Repair To Compound Wall At Certain Locations At Af Stn Uttarlai
Tender Value
38.78 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
5 days left
EMD
77560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Compound Wall At Certain Locations At Af Stn Uttarlai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts(wood, steel or RCC) any section embedded in concrete including taking out embedded portion of concrete and making good distrubed ground all as directed. |
| 2 | Excavation in post holes(or similar holes) in soft/loose soil each n exc 0.5 cum each getting out, and removing surplus soil to a distance nexc 50m and making good surface. |
| 3 | Dismantling existing barbed wire of any thickness from fencing and remove to store complete all as specified and as directed. |
| 4 | Dismantling existing concertina coil of any thickness and dia from security/compound wall and remove to store complete all as specified and as directed. |
| 5 | M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete. |
| 6 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 all as directed. |
| 7 | Supply only chain link MS galvanised fencing any size all as specified and directed. |
| 8 | Fixing only chain link fencing any type of standards, rails straining bolts, etc including provision of binding wire. |
| 9 | S&F MS round bar 10mm dia and over for line wire to chain link fencing etc conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde-E-165) complete all as specified and as directed. |
| 10 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed. |
| 11 | S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt. |
| 12 | S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut exc. 10cm and n. exc 15cm long and 5 mm to 10mm dia bolt. |
| 13 | M&L for drilling and tapping holes upto 12 mm dia (and countersunk, if required), depth of hole exc. 3 mm but n exc. 12 mm in MS posts for securing fencing wire mesh etc. complete all as specified and as directed. |
| 14 | S&F framed work as in doors or gates of angle,mild steel plate or other section with gusset plates , rails , braces, etc complete of Gde Fe-410-W or Gde - E-250, drilling, welding etc for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding |
| 15 | S&F mild steel work as in hold fasts of flat iron, hooks, pintle hinges, cleats hand made sliding bolts and smilar items conforming to Fe-290 Gde-E-165 complete all as specified. |
| 16 | S&F 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete as specified. |
| 17 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed. |
| 18 | M&L for preparation of new steel surfaces of any description n.exc.10cm in width or girth and when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed. |
| 19 | M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint. |
| 20 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed . |
| 21 | S&F galvanised punched tape concertina coil of 1050mm dia (dia of coil when unstretched) and 915mm when stretched, dia of core wire not less than 2.50mm, width of steel strip 19mm and thickness 0.50mm, and fixed on angle iron post/struts with 3.15mm dia GI wire complete all as specified and as directed. |
| 22 | S&F galvanised punched tape concertina coil of 450mm dia (dia of coil when unstretched) and 400mm when stretched, dia of core wire not less than 2.50mm, width of steel strip 19mm and thickness 0.50mm, and fixed on angle iron post/struts with 3.15mm dia GI wire complete all as specified and as directed. |
| 23 | S&F 0.56 mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 24 | Demolition of Brickwork or stone/boulder masonry and precast block masonary for ashlar facings,dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as directed. |
| 25 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete. |
| 26 | M&L for 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment incl over 15mm thick rendering in CM 1:4 rough finished complete all as specified and as directed. |
| 27 | M&L for providing 35mm thick Dholpur stone jali, including all mouldings and frame and set in CM 1:4 over complound wall complete all as specified and as directed. |
| 28 | M&L for Providing precast cement concrete 1:2:4 type B0 (12.5mm graded aggregate) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame and set in CM 1:4 complete all as specified and as directed. |
| 29 | M&L for providing, cement concrete 1:2:4 type B1 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed. |
| 30 | Taking down cement plaster on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc and including removal for debris and rubbish from the site complete all as specified and directed. |
| 31 | M&L rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 32 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 33 | M&L for preparation of old decorated plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender