Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #58205204

Tender For Repair/ Maintenance Polishing Of Wooden Furniture At Mil Stn Jalipa Under Ge (A) Barmer

Issued by Statutory Bodies & Commissions/Committees · Barmer, Rajasthan
Tender Value
35 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
14 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair/ Maintenance Polishing Of Wooden Furniture At Mil Stn Jalipa Under Ge (A) Barmer- 1 Repair To Various Sofas 1/2/3/4/5 Seater Drg No. Fd-373/Tp/Fd-Map-Ii/02 :- Replacement Of Existing Foam Cushion Of Sofa Including Existing Tapestry Cloth And Supply & Fix New Pu Moulded Foam Of Density 50-55 Kg Per Cubic Meter Of Size 560 X 535 X 100Mm Thick, Duly Stitched With Tapestry Cloth And Closed With Velcro Of Suitable Size Complete All As Directed And Shown On Drg . Note: (The Cost Of Tapestry Cloth Shall Not Be Less Than Rs. 350.00 Per Rm). 2 M&L For Smoothening Surface With Sand Paper Of Sofa One Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 3 M&L For Smoothening Surface With Sand Paper Of Sofa Three Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 4 M&L For Smoothening Surface With Sand Paper Of Sofa Set Four Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 5 M&L For Smoothening Surface With Sand Paper Of Sofa Set Five Seater For Repolishing The Old Polished Surface Or Unpolished Surface Including Bottom Of Sofa With Two Coats Of Melamine Polish Both Above And Below The Sofa Complete All As Specified And Directed. 6 Repairs To Chair Dining Drg No. Fd-279, Fd-Map-Ii/05 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Rear Leg Made Out Of 1St Class Hard Wood Of Size 890X55X35Mm 7 Removal Of Unserviceable Front Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 460X55X30Mm 8 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Out Of 1St Class Hard Teak Wood Of Size 440X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 9 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Out Of 1St Class Hard Teak Wood Of Size 430X65X30Mmas Iincluding Drilling Holes For Weaving 12 Cm Center To Centre 10 Removal Of Unserviceable Bottom Stiffener And S&F New Bottom Stiffener Made Out Of 1St Class Hard Teak Wood As Per Drg And Complete All As Specified And As Directed. 11 Removal Of Unserviceable Back Stiffener And S&F New Back Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 20X25Mm As Per Drg And Complete All As Specified And As Directed. 12 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 13 Repairs To Chair Writing Drg No. Fd-280:- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Leg Of Size 890X55X30Mm Made Out Of 1St Class Hard Teak Wood 14 Removal Of Unserviceable Front Leg And S&F New Leg Of Size 685X55X30Mm Made Out Of 1St Class Hard Teak Wood 15 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Out Of 1St Class Hard Teak Wood Of Size 470X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 16 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Out Of 1St Class Hard Teak Wood Of Size 535X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 17 Removal Of Unserviceable Bottom Stiffener And S&F New Bottom Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 535X25X20Mm 18 Removal Of Unserviceable Back Stiffener And S&F New Back Stiffener Made Out Of 1St Class Hard Teak Wood 19 Removal Of Unserviceable Arm Rest And S&F New Arm Rest Made Out Of 1St Class Hard Teak Wood Of Size 470X60X25Mm As Per Drg And Complete All As Specified And As Directed 20 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 21 Repairs To Chair Easy Drg No. Fd-229 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 510X55X25Mm As Per Drg And Complete All As Specified And As Directed. 22 Removal Of Unserviceable Front Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 535X55X25Mm As Per Drg And Complete All As Specified And As Directed. 23 Removal Of Unserviceable Side Rail And S&F New Side Rail Out Of 1St Class Hard Teak Wood Of Size 575X70X40Mm As Per Drg And Complete All As Specified And As Directed. 24 Removal Of Unserviceable Front/Back Rail And S&F New Front/Back Rail Out Of 1St Class Hard Teak Wood Of Size 510X55X25Mm As Per Drg And Complete All As Specified And As Directed. 25 Removal Of Unserviceable Arm Rest And S&F New Arm Rest Out Of 1St Class Hard Teak Wood Of Size 610X65X25Mm As Per Drg And Complete All As Specified And As Directed.(Each Arms Rest Shall Be Measured Separately). 26 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 27 Repair Of Peg Table Drg No. Fd-277/384 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 380X60X30Mm 28 Removal Of Unserviceable Long Rail And S&F New Long Rail Out Of 1St Class Hard Teak Wood Of Size 450X40X20Mm 29 Removal Of Unserviceable Short Rail And S&F New Short Rail Out Of 1St Class Hard Teak Wood Of Size 300X40X20Mm 30 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Out Of 1St Class Hard Teak Wood Of Size 300X40X20Mm 31 Removing The Existing Unserviceable Top Of Peg Table And S&F New Top Of Size 450X300Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge. 32 M&L For Polishing To Wooden Surfaces Of Repaired Peg Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 33 Repair To Table Dining 06/08 Person Drg No. Fd-273/Fd/Map-Ii/03 :- Removing The Existing Unserviceable/ Broken Top Of Table Dining 8 Person And Supply And Fix New Top Of 1800X900Mmx18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 34 Removing The Existing Unserviceable/ Broken Top Of Table Dining 6 Person And Supply And Fix New Top Of 1500X900Mmx18 Mm Thick Pre-Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 35 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Specie Tectona Grandise Of Size 750X75X40Mm (Each Leg Shall Be Measured Separately). 36 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 1800X100X25Mm 37 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 900X100X25Mm 38 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Of Size 900X100X25Mm Made Out Of 1St Class Hard Teak Wood 39 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 1800X100X25Mm 40 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 41 Repair Of Teapoy Drg No. Fd-278/382 :- Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 540X60X30Mm 42 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 480X50X20Mm 43 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 390X50X20Mm 44 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 390X50X20Mm 45 Removal Of Unserviceable Centre Stiffener And S&F New Centre Stiffener Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 480X50X20Mm 46 Removing The Existing Unserviceable Top Of Teapoy And S&F New Top Of Size 600X450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 47 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 48 Repair To Table Writing Drg No. Fd-275:- Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 760X55X35Mm As Per Drg And Complete All As Specified And As Directed. 49 Removal Of Unserviceable Long Rail Of Table Frame And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Of Size 1035X50X25Mm As Per Drg And Complete All As Specified And As Directed. 50 Removal Of Unserviceable Short Rail Of Table Frame And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Of Size 530X50X25Mm As Per Drg And Complete All As Specified And As Directed. 51 Removal Of Unserviceable Drawer And S&F New Drawer Front And Sides Made Out Of 18 Mm Thick Mdf Board Exterior Grade Both Side Laminated , 6Mm Thick (Bwr Gde) Plywood At The Bottom Of Drawer Over One Set Of Powder Coated Telescopic Channels To Move The Drawers All As Per Drg And Complete All As Per Specification And As Directed. Including Chromium Plated Knob Of 40Mm Dia 52 Removal Of Unserviceable Bottom Centre Stiffener Of Table Frame And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 1035X50X25Mm As Per Drg And Complete All As Specified And As Directed. 53 Removal Of Unserviceable Bottom Side Stiffener Of Table Frame And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 530X50X25Mm As Per Drg And Complete All As Specified And As Directed. 54 Removal Of Unserviceable Top And S&F New Top Of Size 1145Mm X 600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade All As Directed By Ge/Engr-In-Charge 55 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 56 Repair To Table 900Mm X 600Mm Without Drawer Drg No. Fd- 284 :- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Tectona Grandise Duly Plained For Table Of Size 740X60X30Mm Complete All As Specified & Shown On Drg. 57 Removal Of Unserviceable Top Long Rail And S&F New Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 58 Removal Of Unserviceable Top Short Rail And S&F New Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 59 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 60 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 61 Removal Of Unserviceable Top And S&F New Top Of Size 900X600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 62 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 63 Repair To Table 900Mm X 600Mm With Drawer Drg No. Fd-283:- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X60X30Mm Complete All As Specified & Shown On Drg. 64 Removal Of Unserviceable Top Long Rail And S&F New Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X110X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 65 Removal Of Unserviceable Top Short Rail And S&F New Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X110X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 66 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Wood Teak For Tableof Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 67 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 68 Removal Of Unserviceable Drawer And S&F New Drawer Front And Sides Made Out Of 600X300X18 Mm Thick Mdf Board Exterior Grade Both Side Laminated , 6Mm Thick (Bwr Gde) Plywood At The Bottom Of Drawer With Aluminium Anodised Knob Of Approved Quality And One Set Of Powder Coated Telescopic Channels To Move The Drawers All As Per Drg And Complete All As Per Specification And As Directed. 69 Removal Of Unserviceable Top And S&F New Top Of Size 900X600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 70 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 71 Repair To Table Centre Drg No. Fd-274 :-Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Of Size 380X60X30Mm Teak For Table Of Size Complete All As Specified & Shown On Drg. 72 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Of 1St Class Hard Wood Teak For Table Of Size 780X50X20Mm Complete All As Specified & Shown On Drg. 73 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Of 1St Class Hard Wood Teak For Table Of Size 390X50X20Mm Complete All As Specified & Shown On Drg. 74 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 390X50X20Mm Complete All As Specified & Shown On Drg. 75 Removing The Existing Unserviceable Table Top Of Table Centre And S&F New Top Of Size 900X450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 76 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 77 Repair To Table 900Mm X 900Mm Drg No. Fd-291:- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X55X35Mmcomplete All As Specified & Shown On Drg. 78 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Of 1St Class Hard Wood Teak For Table Of Size 830X75X25Mm Complete All As Specified & Shown On Drg. 79 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Of 1St Class Hard Wood Teak For Table Of Size 790X75X25Mm Complete All As Specified & Shown On Drg. 80 Removing The Existing Unserviceable Table Top Of Table 900X900Mm And S&F New Top Table 900X900Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 81 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 82 Repair Of Table Dressing Gents Drg No. Fd-230:- Removing The Existing Unserviceable/ Broken Mirror With 6Mm Thick Back Plywood Of Table Dressing Gents And Supply And Fix New Mirror Of Size 760X380Mm Minimum 6 Mm Thick Suitable For The Existing Frame Alongwith 6Mm Thick Bwp Grade Plywood Back All As Per Existing And Shown On Drg. 83 Removing The Existing Unsv/Broken Back Sides Of Table Dressing Gents And S&F In Repair New Back Sides Made Out Of 6Mm Thick (Bwr Gde) Plywood All As Directed By Ge/Engr-In-Charge 84 Removing The Existing Unsv/Broken Top Of Table Dressing Gents And S&F In Repair New Top Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 85 Removing The Existing Unserviceable/ Broken Drawers Of Table Dressing Gents And Supply And Fix New Drawers Front Made Of 18 Mm Thick Prelaminated Mdf Board And Bottom Of Drawer With 6 Mm Thick Bwr Grade Plywood Duly Fixed With Aluminium Anodised Knobs 40 Mm Complete All As Per Existing And Shown On Drg. 86 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 87 Chair Easy With Cushion Drg No Fd-358 :- Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Wood Teak Rear Leg Of Size 510X70X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 88 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 535X70X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 89 Removal Of Unserviceable Side Rail And S&F New Side Rail Made Of 1St Class Hard Wood Teak For Table Of Size 575X70X25Mm Complete All As Specified & Shown On Drg. 90 Removal Of Unserviceable Front/Back Rails Of Seat Frame And S&F New Front/Back Rails Made Of 1St Class Hard Wood Teak For Table Of Size 510X55X20Mm Complete All As Specified & Shown On Drg. 91 Removing The Existing Unserviceable/ Broken Arm Rest And Supplying And Fixing 1St Class Hard Wood Teak Arm Rest Of Size 610X65X25Mm Complete All As Specified And Shown On Drgs (Each Arms Shall Be Rest Measured Separately). 92 S&F Of Cushion Foam For Chair Easy 50-55Mm Density 75Mm Thick (Make-Sleepwell) Duly Covered With Best Quality Tapestry Cloth Complete All As Directed And Specified Note:- Rate Of Tapestry Cloth Shall Not Be Less Than Rs 350/- Per Rm 93 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 94 Re-Canning Of Chairs Drg No. Fd-228,229, 279,280,252,244 :- Removing The Existing Unserviceable/ Broken Plastic Cane And Supplying And Canning With New Plastic Cream Colour Cane 2 Mm Wide And 0.5Mm Thick, 4 Mm Thick For Borders For Canning Of Chair Of All Types Including Bin Soiled Linen, Stool Dressing Complete As Per Godrej Pattern. 95 Chair Dining Cushioned Drg No. Fd/Map-Ii/04 :- Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Teak Wood Rear Leg Of Size 950X50X35Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 96 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 450X50X35Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 97 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Of 1St Class Hard Wood Teak For Table Of Size 450X65X25Mm Complete All As Specified & Shown On Drg. 98 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Of 1St Class Hard Wood Teak For Table Of Size 450X90X25Mm Complete All As Specified & Shown On Drg. 99 Removing The Existing Worn Out Seat Cushion And S&F New Pu Foam Seat Foam Of Size 450X450X75Mm Thick, Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwp Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 100 Removal Of Unserviceable Bottom Stiffener Of Seat Frame And S&F New Bottom Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 450X20X25Mm Complete All As Specified & Shown On Drg. 101 Removal Of Unserviceable Vertical Back Stiffener Of Seat Frame And S&F New Vertical Back Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 500X30X15Mm Complete All As Specified & Shown On Drg. 102 Removal Of Unserviceable Nylon Buffers From The Bottom Of Legs And S&F New Nylon Buffers On The Bottom Of Leg. 103 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 104 Repair Of Table Bed Side Drg No. Fd-276 :- Removal Of Unserviceable Top And S&F New Top Of Size 230Mm X 450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 105 Removal Of Unserviceable Side And S&F New Side Of Size 510X230Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 106 Removal Unserviceable Plywood At Back Of Table Bed Side And S&F New Back Of Size 510X450Mm Made Of Plywood 6Mm Thick Bwr Gde As Per Drg And Complete All As Directed. 107 M&L For Melamine Polishing Of Complete Table Exposed To View Except Laminated Portion Per Drg And Complete All As Specified And As Directed. 108 Repair To Side Board Drg No. Fd-371 :- Removal Of Unserviceable Top And S&F New Top Of Size 1220X455Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 109 Removal Of Unserviceable Shelves Of Side Board And S&F New Shelves Of Side Board Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 110 Removing The Unserviceable/ Broken Drawers Of Side Board And Supply And Fixing New Drawers Of Size 455X385Mm Made Of Front 18 Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade Both One Side Laminated And Other Side White Balancing Paper Rest All The Sides Bottom Etc To Be Made Out Of 12Mm Thick Plmdf Board Exterior Grade,Also Fixing Of 40 Mm Knob Of Matching Colour As Per Shade Of Board, Alongwith One Set Of Telescopic Channel Complete All As Per Existing And Shown On Drg. 111 Removing The Existing Unserviceable/ Broken Shutter Of Side Board And Supply And Fix New Shutter Of Size 400X650Mm Made Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest/Naina Teak Fixed With 40 Mm Wide Chromium Plated Continuous Piano Hinges Including Cp Handle, 100 Mm Long,01 Nos Knob And Magnetic Catcher To Stick The Doors. Edges Of The Shutters To Be Covered Pvc Beading 2Mm Thick Machine Pressed All Around, Complete All As Specified And Shown In Drg. (Note: Each Leaf To Be Measured Separately). 112 Removing The Unserviceable Broken Back Ply Of Side Board And Supply And Fixing New 6 Mm Thick Bwp Grade Plywood Of Size 1220X635Mm Conforming To Is: 710 All As Specified And Shown On Drg. 113 Removing The Unserviceable/ Broken Leg Of Side Board And Supply And Fixing 4 Nos Of New Leg At The Bottom Frame Made Out Of Ist Class Hard Wood (Teak) Of Size 125X45X45Mm 114 M&L For Melamine Polishing Of Complete Side Exposed To View Except Laminated Portion Per Drg And Complete All As Specified And As Directed. 115 Repair Of Table Dressing Ladies Drg No. Fd-251 :- Removing The Existing Unserviceable/ Broken Mirror With 6Mm Thick Back Plywood Of Table Dressing Ladies And Supply And Fix New Mirror Of Size 1220X366Mm Minimum 6 Mm Thick Suitable For The Existing Frame Alongwith 6Mm Thick Bwr Grade Plywood Back All As Per Existing And Shown On Drg. 116 Removal Old U/S Back Plywood Of Glass And Fixing 1220X766X6 Mm Thick Bwp Grade Plywood Conforming To Is: 710 Of Existing Shape & Size 117 Removal Of Old U/S Sliding Glass And Fixing New Glass Of Size 550X300X5.5Mm Thick As Per Existing. 118 Removing The Existing Unsv/Broken Top Of Table Dressing Ladies And S&F In Repair New Top Of Size 900X380Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 119 Removal Of Old U/S Leg Of Table And Fixing New Legs Of Size 150X45X45Mm 1St Class Hard Wood (Teak) 120 Removing The Existing Unserviceable/ Broken Drawers Of Table Dressing Ladies And Supply And Fix New Drawers Front Made Of 18 Mm Thick Prelaminated Mdf Board And Bottom Of Drawer With 6 Mm Thick Bwr Grade Plywood Over One Set Of Powder Coated Telescopic Channels To Move The Drawers Duly Fixed With Aluminium Anodised Knobs 40 Mm Complete All As Per Existing And Shown On Drg. 121 Preparation Of Old Surface And French Polishing To Table Dressing Ladies Except Laminated Portion All As Directed. 122 Repair Of Trestle Store Room Wooden Drg No. Fd-141(M):-Removing Existing Unsv Legs Of Trestle Store Room Wooden And S&F New Legs Made Out Of 1St Class Hard Wood Teak Of Size 300X100X100Mm As Per Drg . 123 Removing Unsv Long Rails Of Trestle And S&F New Long Rails Made Out Of 1St Class Hard Wood Teak Of Size 2450X100X100Mm 124 Removing Unsv Vertical Stiffeners Of Trestle And S&F New Stiffeners Made Out Of 1St Class Hard Wood Teak Of Size 400X100X65Mm 125 Removing Unsv Horizontal Stiffeners Of Trestle And S&F New Stiffeners Made Out Of 1St Class Hard Wood Teak Of Size 600X100X65Mm 126 M&L For Smoothening Surfaces With Sand Paper Of Trestle Wooden And Repainting The Old Painted Surface With One Coat Of Synthetic Enamel Paint Black Colour Complete All As Specified And Directed. 127 Repairs To Bed Ply Wood Top Drg No. Fd-245,246 :- Removing The Existing Unserviceable/Broken Head Board Including Legs And Supply & Fixing New Head Board Of Size900X 460Mm For Bed Ply Wood Top Including Teak Wood Legs Of Size 600X60X60Mm All As Specified And Shown On Drg 128 Removing The Existing Unserviceable /Broken Foot Board Including Legs And Supply & Fixing New Foot Board Of Size 900X300X32Mm For Bed Plywood Top Including Teak Wood Legs And French Polishing Complete All As Specified And Shown On Drgs. 129 Removing The Existing Unserviceable/ Broken Long Rail And Supplying And Fixing New 1St Class Hard Wood Teak Long Rail Of Size 1920X90X30Mm For Charpoy Wooden Including French Polishing All As Specified And Shown On Drg (Each Long Rail Shall Be Measured Separately). 130 Removing The Existing Unserviceable/ Broken Short Rail And Supplying And Fixing New 1St Class Hard Wood Teak Short Rail Of Size 900X100X40Mm For Charpoy Wooden All As Specified And Shown On Drg (Each Short Rail Shall Be Measured Separately). 131 Removing The Existing Unserviceable/ Broken Stiffener And Supplying And Fixing New 1St Class Hard Wood Teak Stiffener Of Size 840X50X50Mm For Charpoy Wooden All As Specified And Shown On Drg (Each Stiffener Shall Be Measured Separately). 132 Removing Unsv Ms Bracket And S&F Flat Iron 25X3Mm,200Mm Bracket Long Fixed With Screw All As Specified And Shown On Drg 133 Removing The Existing Unserviceable /Broken Ply Wood Top And Supply And Fixing New 12 Mm Thick Bwp Plywood Of Size 1980X900Mm Exterior Grade Complete All As Shown On Drg And As Specified. 134 M&L For Polishing To Wooden Surfaces Of Repaired Bed (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 135 Repair To Bench Workshop Wooden Drg No. Fd-301 :- Taking Down Old U/S Top Of Bench Workshop Wooden And S&F New Top Of Soze 1500X900X40Mm Thick 1St Class Hard Wood Complete All As Specified And Directed. 136 Removing Of Old Unserviceable Drawer And S&F Of New Drawer Of Size 900X450Mm Made Of 1St Class Teak Wood With 12 Mm Thick Plywood On Bottom Of Drawer Complete All As Specified And Directed. 137 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 760X75X40Mm As Per Drg And Complete All As Specified And As Directed. 138 Removal Of Unserviceable Long Rail And S&F New Long Rail Out Of 1St Class Hard Teak Wood Of Size 1500X125X25Mm As Per Drg And Complete All As Specified And As Directed. 139 Removal Of Unserviceable Short Rail And S&F New Short Rail Out Of 1St Class Hard Teak Wood As Per Drg 900X125X25Mm And Complete All As Specified And As Directed. 140 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Out Of 1St Class Hard Teak Wood Of Size 900X50X25Mm As Per Drg And Complete All As Specified And As Directed. 141 M&L For Polishing To Wooden Surfaces Of Repaired Bench (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 142 Chair Dining Long Back Drg No. Fd-357 :-Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Teak Wood Rear Leg Of Size 1120X50X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 143 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 450X50X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 144 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Out Of 1St Class Hard Teak Wood Of Size 450X50X25Mm As Per Drg And Complete All As Specified And As Directed. 145 Removal Of Unserviceable Front/Back Rails Of Seat Frame And S&F New Front/Back Rails Out Of 1St Class Hard Teak Wood Of Size 465X50X25Mm As Per Drg And Complete All As Specified And As Directed. 146 Removing The Existing Worn Out Seat Cushion And S&F New Pu Foam Seat Foam Of Size 450X400X75Mm Thick, Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwr Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 147 Removing The Existing Worn Out Back Cushion And S&F New Pu Foam Back Foam Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwr Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 148 Removing The Existing Unserviceable/ Broken Bottom Stiffener And Supplying And Fixing 1St Class Hard Wood Teak Bottom Stiffener Of Size 450X40X25Mm Complete All As Specified And Shown On Drgs. 149 Removing The Existing Unserviceable/ Broken Nylon Buffers On The Bottom Of Legs And S&F New Nylon Buffers Complete All As Specified And Shown On Drgs. 150 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 151 Repair To Table 600Mm X 600Mm Drg No. Fd-293 :- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X55X35Mm Complete All As Specified & Shown On Drg. 152 Removal Of Unserviceable Top Long Rail And S&F New Front Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 530X50X25Mm All As Per Drg And Complete All As Per Specification And As Directed. 153 Removal Of Unserviceable Top Short Rail And S&F New Front Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 490X50X25Mm All As Per Drg And Complete All As Per Specification And As Directed. 154 Removal Of Unserviceable Top And S&F New Top Of Size 600X600Mm Made Out Of18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 155 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 156 Repairs To Rifle Rack For 6/10/12/18 Drg No. Hq/134/F/22/89 :- Removing Existing Unsv Legs Of Rack Rifles Wooden And S&F New Legs Made Out Of 1St Class Hard Wood Teak Of Size 100X100X900Mm As Per Drg . 157 Removing Unsv Top Plank Of Rack Rifle And S&F New Plank Made Out Of 1St Class Hard Wood Teak Of Size 1200X150X50Mm 158 Removing Unsv Bottom Plank Of Rack Rifle And S&F New Plank Made Out Of 1St Class Hard Wood Teak Of Size 1200X250X50Mm 159 M&L For Polishing To Wooden Surfaces Of Repaired Rifle Rack(Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 160 Repair To Table Dining 04 Person Drg No. Fd-273 :- Removing The Existing Unserviceable/ Broken Top Of Table Dining 4 Person And Supply And Fix New Top Of 1200X900Mm X18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 161 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 750X75X40Mm As Per Drg And Complete All As Specified And As Directed. (Each Leg Shall Be Measured Separately). 162 All As Per Item No 26.01 Here-In-Before But Top Long Rails Of Table Dining (Each Rail Will Be Measured Separately). 163 All As Per Item No 26.01 Here-In-Before But Top Short Rails Of Table Dining (Each Rail Will Be Measured Separately). 164 All As Per Item No 26.01 Here-In-Before But Bottom Side Stiffiner Of Table Dining (Each Stiffener Will Be Measured Separately). 165 All As Per Item No 26.01 Here-In-Before But Bottom Centre Stiffiner Of Table Dining (Each Stiffener Will Be Measured Separately). 166 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 167 Repair Of Hat Stand With Mirror Drg No. Fd-233 ;- Removing Unsv Veeneerply From Hat Stand And S&F New Veneerply Teakshade Of Size 1000X700Mm Of Bwr Grade

BOQ

Name of Work:- REPAIR/ MAINT, POLISHING OF WOODEN FURNITURE AT MIL STN JALIPA UNDER GE (A) BARMER
Sl. No. Item Description
1Repair to various Sofas 1/2/3/4/5 SEATER DRG NO. FD-373/TP/FD-MAP-II/02 :- Replacement of existing foam cushion of Sofa including existing tapestry cloth and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as directed and shown on drg . Note: (The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM).
2M&L for smoothening surface with sand paper of Sofa one seater for repolishing the old polished surface including bottom with two coats of Melamine polish complete all as specified and directed.
3M&L for smoothening surface with sand paper of Sofa three seater for repolishing the old polished surface including bottom with two coats of melamine polish complete all as specified and directed.
4M&L for smoothening surface with sand paper of Sofa set four seater for repolishing the old polished surface including bottom with two coats of Melamine polish complete all as specified and directed.
5M&L for smoothening surface with sand paper of Sofa set five seater for repolishing the old polished surface or unpolished surface including bottom of sofa with two coats of Melamine polish both above and below the sofa complete all as specified and directed.
6Repairs to Chair Dining DRG NO. FD-279, FD-MAP-II/05 :- S&F in repair following part of chair dining of 1st class hard wood Tectona Grandise as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Removal of unserviceable rear leg and S&F new Rear leg made out of 1st class hard wood of size 890x55x35mm
7Removal of unserviceable front leg and S&F new leg made out of 1st class hard teak wood of size 460x55x30mm
8Removal of unserviceable Side rail of seat frame and S&F new Side rail made out of 1st class hard teak wood of size 440x65x30mm including drilling holes for weaving 12 cm center to centre
9Removal of unserviceable Front/back rail of seat frame and S&F new Front/back rail made out of 1st class hard teak wood of size 430x65x30mmas iincluding drilling holes for weaving 12 cm center to centre
10Removal of unserviceable Bottom stiffener and S&F new Bottom stiffener made out of 1st class hard teak wood as per drg and complete all as specified and as directed.
11Removal of unserviceable Back stiffener and S&F new Back stiffener made out of 1st class hard teak wood of size 20x25mm as per drg and complete all as specified and as directed.
12M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
13Repairs to Chair Writing DRG NO. FD-280:- S&F in repair following part of chair dining of 1st class hard wood Tectona Grandise as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Removal of unserviceable rear leg and S&F new leg of size 890x55x30mm made out of 1st class hard teak wood
14Removal of unserviceable front leg and S&F new leg of size 685x55x30mm made out of 1st class hard teak wood
15Removal of unserviceable Side rail of seat frame and S&F new Side rail made out of 1st class hard teak wood of size 470x65x30mm including drilling holes for weaving 12 cm center to centre
16Removal of unserviceable Front/Back rail of seat frame and S&F new Front/Back rail made out of 1st class hard teak wood of size 535x65x30mm including drilling holes for weaving 12 cm center to centre
17Removal of unserviceable Bottom Stiffener and S&F new Bottom Stiffener made out of 1st class hard teak wood of size 535x25x20mm
18Removal of unserviceable Back Stiffener and S&F new Back Stiffener made out of 1st class hard teak wood
19Removal of unserviceable arm rest and S&F new arm rest made out of 1st class hard teak wood of size 470x60x25mm as per drg and complete all as specified and as directed
20M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
21Repairs to Chair easy DRG NO. FD-229 :- S&F in repair following part of chair dining of 1st class hard wood Tectona Grandise as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Removal of unserviceable rear leg and S&F new leg made out of 1st class hard teak wood of size 510x55x25mm as per drg and complete all as specified and as directed.
22Removal of unserviceable front leg and S&F new leg made out of 1st class hard teak wood of size 535x55x25mm as per drg and complete all as specified and as directed.
23Removal of unserviceable side rail and S&F new side rail out of 1st class hard teak wood of size 575x70x40mm as per drg and complete all as specified and as directed.
24Removal of unserviceable front/back rail and S&F new front/back rail out of 1st class hard teak wood of size 510x55x25mm as per drg and complete all as specified and as directed.
25Removal of unserviceable arm rest and S&F new arm rest out of 1st class hard teak wood of size 610x65x25mm as per drg and complete all as specified and as directed.(Each arms rest shall be measured separately).
26M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
27REPAIR OF PEG TABLE DRG NO. FD-277/384 :- S&F in repair following part of chair dining of 1st class hard wood Tectona Grandise as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood of size 380x60x30mm
28Removal of unserviceable long rail and S&F new long rail out of 1st class hard teak wood of size 450x40x20mm
29Removal of unserviceable short rail and S&F new short rail out of 1st class hard teak wood of size 300x40x20mm
30Removal of unserviceable side stiffener and S&F new side stiffener out of 1st class hard teak wood of size 300x40x20mm
31Removing the existing unserviceable top of peg table and S&F new top of size 450x300mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge.
32M&L for polishing to wooden surfaces of repaired peg table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
33REPAIR TO TABLE DINING 06/08 PERSON DRG NO. FD-273/FD/MAP-II/03 :- Removing the existing unserviceable/ broken top of Table dining 8 person and supply and fix new top of 1800x900mmx18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
34Removing the existing unserviceable/ broken top of Table dining 6 person and supply and fix new top of 1500x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
35Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood of specie Tectona Grandise of size 750x75x40mm (Each leg shall be measured separately).
36Removal of unserviceable long rail and S&F new long rail made out of 1st class hard teak wood specie Tectona Grandise of size 1800x100x25mm
37Removal of unserviceable short rail and S&F new short rail made out of 1st class hard teak wood specie Tectona Grandise of size 900x100x25mm
38Removal of unserviceable bottom side stiffener and S&F new bottom side stiffener of size 900x100x25mm made out of 1st class hard teak wood
39Removal of unserviceable bottom centre stiffener and S&F new bottom centre stiffener made out of 1st class hard teak wood of size 1800x100x25mm
40M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
41REPAIR OF TEAPOY DRG NO. FD-278/382 :- Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood specie Tectona Grandise of size 540x60x30mm
42Removal of unserviceable long rail and S&F new long rail made out of 1st class hard teak wood specie Tectona Grandise of size 480x50x20mm
43Removal of unserviceable short rail and S&F new short rail made out of 1st class hard teak wood specie Tectona Grandise of size 390x50x20mm
44Removal of unserviceable side stiffener and S&F new side stiffener made out of 1st class hard teak wood specie Tectona Grandise of size 390x50x20mm
45Removal of unserviceable centre stiffener and S&F new centre stiffener made out of 1st class hard teak wood specie Tectona Grandise of size 480x50x20mm
46Removing the existing unserviceable top of teapoy and S&F new top of size 600x450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
47M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
48REPAIR TO TABLE WRITING DRG NO. FD-275:- Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood of size 760x55x35mm as per drg and complete all as specified and as directed.
49Removal of unserviceable long rail of table frame and S&F new long rail made out of 1st class hard teak wood of size 1035x50x25mm as per drg and complete all as specified and as directed.
50Removal of unserviceable short rail of table frame and S&F new short rail made out of 1st class hard teak wood of size 530x50x25mm as per drg and complete all as specified and as directed.
51Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde) plywood at the bottom of drawer over one set of powder coated telescopic channels to move the drawers all as per drg and complete all as per specification and as directed. including chromium plated knob of 40mm Dia
52Removal of unserviceable Bottom centre stiffener of table frame and S&F new Bottom centre stiffener made out of 1st class hard teak wood of size 1035x50x25mm as per drg and complete all as specified and as directed.
53Removal of unserviceable Bottom side stiffener of table frame and S&F new Bottom side stiffener made out of 1st class hard teak wood of size 530x50x25mm as per drg and complete all as specified and as directed.
54Removal of unserviceable top and S&F new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge
55M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
56REPAIR TO TABLE 900mm x 600mm WITHOUT DRAWER DRG NO. FD- 284 :- Removal of unserviceable leg and S&F new leg made of 1st class hard wood tectona Grandise duly plained for table of size 740x60x30mm complete all as specified & shown on drg.
57Removal of unserviceable top long rail and S&F new top long rail made out of 1st class hard wood teak for table of size 780x60x20mm all as per drg and complete all as per specification and as directed.
58Removal of unserviceable top short rail and S&F new top short rail made out of 1st class hard wood teak for table of size 540x60x20mm all as per drg and complete all as per specification and as directed.
59Removal of unserviceable Bottom Side stiffener and S&F new Bottom Side stiffener made out of 1st class hard wood teak for table of size 540x60x20mm all as per drg and complete all as per specification and as directed.
60Removal of unserviceable Bottom Centre stiffener and S&F new Bottom Centre stiffener made out of 1st class hard wood teak for table of size 780x60x20mm all as per drg and complete all as per specification and as directed.
61Removal of unserviceable top and S&F new top of size 900x600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF Board to be fixed with 2mm thick PVC beading machine glued all around with matching colour all as directed by GE/Engr-in-Charge
62M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
63REPAIR TO TABLE 900mm x 600mm WITH DRAWER DRG NO. FD-283:- Removal of unserviceable leg and S&F new leg made of 1st class hard wood teak for table of size 740x60x30mm complete all as specified & shown on drg.
64Removal of unserviceable top long rail and S&F new top long rail made out of 1st class hard wood teak for table of size 780x110x20mm all as per drg and complete all as per specification and as directed.
65Removal of unserviceable top short rail and S&F new top short rail made out of 1st class hard wood teak for table of size 540x110x20mm all as per drg and complete all as per specification and as directed.
66Removal of unserviceable Bottom Side stiffener and S&F new Bottom Side stiffener made out of 1st class hard wood teak for tableof size 540x60x20mm all as per drg and complete all as per specification and as directed.
67Removal of unserviceable Bottom Centre stiffener and S&F new Bottom Centre stiffener made out of 1st class hard wood teak for table of size 780x60x20mm all as per drg and complete all as per specification and as directed.
68Removal of unserviceable drawer and S&F new drawer front and sides made out of 600x300x18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approved quality and one set of powder coated telescopic channels to move the drawers all as per drg and complete all as per specification and as directed.
69Removal of unserviceable top and S&F new top of size 900x600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF Board to be fixed with 2mm thick PVC beading machine glued all around with matching colour all as directed by GE/Engr-in-Charge
70M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
71REPAIR TO TABLE CENTRE DRG NO. FD-274 :-Removal of unserviceable leg and S&F new leg made of 1st class hard wood of size 380x60x30mm teak for table of size complete all as specified & shown on drg.
72Removal of unserviceable long rail and S&F new long rail made of 1st class hard wood teak for table of size 780x50x20mm complete all as specified & shown on drg.
73Removal of unserviceable short rail and S&F new short rail made of 1st class hard wood teak for table of size 390x50x20mm complete all as specified & shown on drg.
74Removal of unserviceable side stiffener and S&F new side stiffener made of 1st class hard wood teak for table of size 390x50x20mm complete all as specified & shown on drg.
75Removing the existing unserviceable table top of table centre and S&F new top of size 900x450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
76M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
77REPAIR TO TABLE 900mm x 900mm DRG NO. FD-291:- Removal of unserviceable leg and S&F new leg made of 1st class hard wood teak for table of size 740x55x35mmcomplete all as specified & shown on drg.
78Removal of unserviceable long rail and S&F new long rail made of 1st class hard wood teak for table of size 830x75x25mm complete all as specified & shown on drg.
79Removal of unserviceable short rail and S&F new short rail made of 1st class hard wood teak for table of size 790x75x25mm complete all as specified & shown on drg.
80Removing the existing unserviceable table top of table 900x900mm and S&F new top table 900x900mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
81M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
82REPAIR OF TABLE DRESSING GENTS DRG NO. FD-230:- Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing gents and supply and fix new mirror of size 760x380mm minimum 6 mm thick suitable for the existing frame alongwith 6mm thick BWP grade plywood back all as per existing and shown on drg.
83Removing the existing unsv/broken back sides of Table Dressing gents and S&F in repair new back sides made out of 6mm thick (BWR Gde) plywood all as directed by GE/Engr-in-Charge
84Removing the existing unsv/broken top of Table Dressing gents and S&F in repair new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
85Removing the existing unserviceable/ broken drawers of Table dressing gents and supply and fix new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWR grade plywood duly fixed with aluminium anodised knobs 40 mm complete all as per existing and shown on drg.
86M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine polish all as directed to obtain glossy finish
87CHAIR EASY WITH CUSHION DRG NO FD-358 :- Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard wood teak rear leg of size 510x70x25mm complete all as specified and shown on drgs (Each leg shall be measured separately)
88Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg of size 535x70x25mm complete all as specified and shown on drgs (Each leg shall be measured separately).
89Removal of unserviceable side rail and S&F new side rail made of 1st class hard wood teak for table of size 575x70x25mm complete all as specified & shown on drg.
90Removal of unserviceable Front/back rails of seat frame and S&F new Front/back rails made of 1st class hard wood teak for table of size 510x55x20mm complete all as specified & shown on drg.
91Removing the existing unserviceable/ broken arm rest and supplying and fixing 1st class hard wood teak arm rest of size 610x65x25mm complete all as specified and shown on drgs (Each arms shall be rest measured separately).
92S&F of cushion foam for chair easy 50-55mm density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 350/- per RM
93M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
94RE-CANNING OF CHAIRS DRG NO. FD-228,229, 279,280,252,244 :- Removing the existing unserviceable/ broken plastic cane and supplying and canning with new plastic cream colour cane 2 mm wide and 0.5mm thick, 4 mm thick for borders for canning of chair of all types including bin soiled linen, stool dressing complete as per Godrej pattern.
95CHAIR DINING CUSHIONED DRG NO. FD/MAP-II/04 :- Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard teak wood rear leg of size 950x50x35mm complete all as specified and shown on drgs (Each leg shall be measured separately)
96Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg of size 450x50x35mm complete all as specified and shown on drgs (Each leg shall be measured separately).
97Removal of unserviceable side rail of seat frame and S&F new side rail made of 1st class hard wood teak for table of size 450x65x25mm complete all as specified & shown on drg.
98Removal of unserviceable front/back rail of seat frame and S&F new front/back rail made of 1st class hard wood teak for table of size 450x90x25mm complete all as specified & shown on drg.
99Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X450X75mm thick, density 50-55 Kg/cum with 12 mm thick plywood BWP grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and shown on drawing.
100Removal of unserviceable bottom stiffener of seat frame and S&F new bottom stiffener made of 1st class hard wood teak for table of size 450x20x25mm complete all as specified & shown on drg.
101Removal of unserviceable Vertical back stiffener of seat frame and S&F new Vertical back stiffener made of 1st class hard wood teak for table of size 500x30x15mm complete all as specified & shown on drg.
102Removal of unserviceable Nylon buffers from the bottom of legs and S&F new Nylon buffers on the bottom of leg.
103M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
104REPAIR OF TABLE BED SIDE DRG NO. FD-276 :- Removal of unserviceable Top and S&F new top of size 230mm x 450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
105Removal of unserviceable side and S&F new side of size 510x230mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
106Removal unserviceable plywood at back of table bed side and S&F new back of size 510x450mm made of plywood 6mm thick BWR Gde as per drg and complete all as directed.
107M&L for Melamine polishing of complete table exposed to view except laminated portion per drg and complete all as specified and as directed.
108REPAIR TO SIDE BOARD DRG NO. FD-371 :- Removal of unserviceable Top and S&F new top of size 1220x455mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
109Removal of unserviceable Shelves of side board and S&F new Shelves of side board made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
110Removing the unserviceable/ broken drawers of side board and supply and fixing new drawers of size 455x385mm made of front 18 mm thick prelaminated MDF Board exterior Grade as per existing shade both one side laminated and other side white balancing paper rest all the sides bottom etc to be made out of 12mm thick PLMDF Board exterior grade,also fixing of 40 mm knob of matching colour as per shade of Board, alongwith one set of telescopic channel complete all as per existing and shown on drg.
111Removing the existing unserviceable/ broken shutter of side board and supply and fix new shutter of size 400x650mm made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak fixed with 40 mm wide chromium plated continuous piano hinges including CP handle, 100 mm long,01 Nos knob and magnetic catcher to stick the doors. Edges of the Shutters to be covered PVC beading 2mm thick machine pressed all around, complete all as specified and shown in drg. (NOTE: Each leaf to be measured separately).
112Removing the unserviceable broken back ply of side board and supply and fixing new 6 mm thick BWP grade plywood of size 1220x635mm conforming to IS: 710 all as specified and shown on drg.
113Removing the unserviceable/ broken leg of side board and supply and fixing 4 Nos of new leg at the Bottom frame made out of Ist class hard wood (teak) of size 125x45x45mm
114M&L for Melamine polishing of complete side exposed to view except laminated portion per drg and complete all as specified and as directed.
115REPAIR OF TABLE DRESSING LADIES DRG NO. FD-251 :- Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing ladies and supply and fix new mirror of size 1220x366mm minimum 6 mm thick suitable for the existing frame alongwith 6mm thick BWR grade plywood back all as per existing and shown on drg.
116Removal old U/S back plywood of glass and fixing 1220x766x6 mm thick BWP grade plywood conforming to IS: 710 of existing shape & size
117Removal of old U/S sliding glass and fixing new glass of size 550x300x5.5mm thick as per existing.
118Removing the existing unsv/broken top of Table Dressing ladies and S&F in repair new top of size 900x380mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
119Removal of old U/S leg of table and fixing new legs of size 150x45x45mm 1st class hard wood (teak)
120Removing the existing unserviceable/ broken drawers of Table dressing ladies and supply and fix new drawers front made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWR grade plywood over one set of powder coated telescopic channels to move the drawers duly fixed with aluminium anodised knobs 40 mm complete all as per existing and shown on drg.
121Preparation of old surface and French polishing to Table dressing ladies except laminated portion all as directed.
122REPAIR OF TRESTLE STORE ROOM WOODEN DRG NO. FD-141(M):-Removing existing unsv legs of trestle store room wooden and S&F new legs made out of 1st class hard wood teak of size 300x100x100mm as per drg .
123Removing unsv long rails of trestle and S&F new Long rails made out of 1st class Hard Wood teak of size 2450x100x100mm
124Removing unsv vertical stiffeners of trestle and S&F new stiffeners made out of 1st class Hard Wood teak of size 400x100x65mm
125Removing unsv horizontal stiffeners of trestle and S&F new stiffeners made out of 1st class Hard Wood teak of size 600x100x65mm
126M&L for smoothening surfaces with sand paper of Trestle wooden and repainting the old painted surface with one coat of synthetic enamel paint black colour complete all as specified and directed.
127REPAIRS TO BED PLY WOOD TOP DRG NO. FD-245,246 :- Removing the existing unserviceable/broken head board including legs and supply & fixing new head board of size900x 460mm for bed ply wood top including teak wood legs of size 600x60x60mm all as specified and shown on drg
128Removing the existing unserviceable /broken foot board including legs and supply & fixing new foot board of size 900x300x32mm for bed plywood top including teak wood legs and French polishing complete all as specified and shown on Drgs.
129Removing the existing unserviceable/ broken long rail and supplying and fixing new 1st class hard wood teak long rail of size 1920x90x30mm for charpoy wooden including French polishing all as specified and shown on Drg (Each long rail shall be measured separately).
130Removing the existing unserviceable/ broken short rail and supplying and fixing new 1st class hard wood teak short rail of size 900x100x40mm for charpoy wooden all as specified and shown on Drg (Each short rail shall be measured separately).
131Removing the existing unserviceable/ broken stiffener and supplying and fixing new 1st class hard wood teak stiffener of size 840x50x50mm for charpoy wooden all as specified and shown on Drg (Each stiffener shall be measured separately).
132Removing unsv MS bracket and S&F flat iron 25x3mm,200mm bracket long fixed with screw all as specified and shown on Drg
133Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWP plywood of size 1980x900mm exterior grade complete all as shown on Drg and as specified.
134M&L for polishing to wooden surfaces of repaired Bed (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
135REPAIR TO BENCH WORKSHOP WOODEN DRG NO. FD-301 :- Taking down old U/S top of bench workshop wooden and S&F new top of soze 1500x900x40mm thick 1st class hard wood complete all as specified and directed.
136Removing of old unserviceable drawer and S&F of new drawer of size 900x450mm made of 1st class teak wood with 12 mm thick plywood on bottom of drawer complete all as specified and directed.
137Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood of size 760x75x40mm as per drg and complete all as specified and as directed.
138Removal of unserviceable long rail and S&F new long rail out of 1st class hard teak wood of size 1500x125x25mm as per drg and complete all as specified and as directed.
139Removal of unserviceable short rail and S&F new short rail out of 1st class hard teak wood as per drg 900x125x25mm and complete all as specified and as directed.
140Removal of unserviceable side stiffener and S&F new side stiffener out of 1st class hard teak wood of size 900x50x25mm as per drg and complete all as specified and as directed.
141M&L for polishing to wooden surfaces of repaired Bench (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
142CHAIR DINING LONG BACK DRG NO. FD-357 :-Removing the existing unserviceable/Broken rear leg and supplying and fixing 1st class hard teak wood rear leg of size 1120x50x25mm complete all as specified and shown on drgs (Each leg shall be measured separately)
143Removing the existing unserviceable/ broken front leg and supplying and fixing 1st class hard wood teak front leg of size 450x50x25mm complete all as specified and shown on drgs (Each leg shall be measured separately).
144Removal of unserviceable Side rail of seat frame and S&F new side rail out of 1st class hard teak wood of size 450x50x25mm as per drg and complete all as specified and as directed.
145Removal of unserviceable Front/back rails of seat frame and S&F new Front/back rails out of 1st class hard teak wood of size 465x50x25mm as per drg and complete all as specified and as directed.
146Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X400X75mm thick, density 50-55 Kg/cum with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and shown on drawing.
147Removing the existing worn out back cushion and S&F new PU foam back foam density 50-55 Kg/cum with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and shown on drawing.
148Removing the existing unserviceable/ broken Bottom stiffener and supplying and fixing 1st class hard wood teak Bottom stiffener of size 450x40x25mm complete all as specified and shown on drgs.
149Removing the existing unserviceable/ broken Nylon buffers on the bottom of legs and S&F new nylon buffers complete all as specified and shown on drgs.
150M&L for polishing to wooden surfaces of repaired chairs (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
151REPAIR TO TABLE 600mm x 600mm DRG NO. FD-293 :- Removal of unserviceable leg and S&F new leg made of 1st class hard wood teak for table of size 740x55x35mm complete all as specified & shown on drg.
152Removal of unserviceable top long rail and S&F new front top long rail made out of 1st class hard wood teak for table of size 530x50x25mm all as per drg and complete all as per specification and as directed.
153Removal of unserviceable top short rail and S&F new front top short rail made out of 1st class hard wood teak for table of size 490x50x25mm all as per drg and complete all as per specification and as directed.
154Removal of unserviceable top and S&F new top of size 600x600mm made out of18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF Board to be fixed with 2mm thick PVC beading machine glued all around with matching colour all as directed by GE/Engr-in-Charge
155M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
156REPAIRS TO RIFLE RACK FOR 6/10/12/18 DRG NO. HQ/134/F/22/89 :- Removing existing unsv legs of rack rifles wooden and S&F new legs made out of 1st class hard wood teak of size 100x100x900mm as per drg .
157Removing unsv top plank of Rack Rifle and S&F new plank made out of 1st class Hard Wood teak of size 1200x150x50mm
158Removing unsv bottom plank of Rack Rifle and S&F new plank made out of 1st class Hard Wood teak of size 1200x250x50mm
159M&L for polishing to wooden surfaces of repaired Rifle rack(old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
160REPAIR TO TABLE DINING 04 PERSON DRG NO. FD-273 :- Removing the existing unserviceable/ broken top of Table dining 4 person and supply and fix new top of 1200x900mm x18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge
161Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood of size 750x75x40mm as per drg and complete all as specified and as directed. (Each leg shall be measured separately).
162All as per item No 26.01 here-in-before but top long rails of table dining (Each rail will be measured separately).
163All as per item No 26.01 here-in-before but top short rails of table dining (Each rail will be measured separately).
164All as per item No 26.01 here-in-before but Bottom side stiffiner of table dining (Each stiffener will be measured separately).
165All as per item No 26.01 here-in-before but Bottom centre stiffiner of table dining (Each stiffener will be measured separately).
166M&L for polishing to wooden surfaces of repaired table (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of Melamine pcolish all as directed to obtain glossy finish
167REPAIR OF HAT STAND WITH MIRROR DRG NO. FD-233 ;- Removing unsv Veeneerply from Hat stand and S&F new Veneerply teakshade of size 1000x700mm of BWR Grade
168Removing unsv mirror and S&F new mirror of size 450x300mm conforming to IS 2553(Part 1) 2018 of Make Modi Guard/Saint Gobain/Atul/Swastic
169Removing unsv pegs and S&F new pegs of size 120mm x 75mm made of copper oxided steel pegs for hanging Hat complete all as specified and directed.
170Removing existing unsv beading and S&F new beading of 6x35mm thick all around the Hat as shown in Drg
171M&L for polishing to wooden surfaces of repaired Hat Stand (old and new surfaces) complete by preparation of the surface by scrapping the old surface by sand paper and applying two coats of melamine pcolish all as directed to obtain glossy finish Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58205204
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 13-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair/ Maintenance Polishing Of Wooden Furniture At Mil Stn Jalipa Under Ge (A) Barmer- 1 Repair To Various Sofas 1/2/3/4/5 Seater Drg No. Fd-373/Tp/Fd-Map-Ii/02 :- Replacement Of Existing Foam Cushion Of Sofa Including Existing Tapestry Cloth And Supply & Fix New Pu Moulded Foam Of Density 50-55 Kg Per Cubic Meter Of Size 560 X 535 X 100Mm Thick, Duly Stitched With Tapestry Cloth And Closed With Velcro Of Suitable Size Complete All As Directed And Shown On Drg . Note: (The Cost Of Tapestry Cloth Shall Not Be Less Than Rs. 350.00 Per Rm). 2 M&L For Smoothening Surface With Sand Paper Of Sofa One Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 3 M&L For Smoothening Surface With Sand Paper Of Sofa Three Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 4 M&L For Smoothening Surface With Sand Paper Of Sofa Set Four Seater For Repolishing The Old Polished Surface Including Bottom With Two Coats Of Melamine Polish Complete All As Specified And Directed. 5 M&L For Smoothening Surface With Sand Paper Of Sofa Set Five Seater For Repolishing The Old Polished Surface Or Unpolished Surface Including Bottom Of Sofa With Two Coats Of Melamine Polish Both Above And Below The Sofa Complete All As Specified And Directed. 6 Repairs To Chair Dining Drg No. Fd-279, Fd-Map-Ii/05 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Rear Leg Made Out Of 1St Class Hard Wood Of Size 890X55X35Mm 7 Removal Of Unserviceable Front Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 460X55X30Mm 8 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Out Of 1St Class Hard Teak Wood Of Size 440X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 9 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Out Of 1St Class Hard Teak Wood Of Size 430X65X30Mmas Iincluding Drilling Holes For Weaving 12 Cm Center To Centre 10 Removal Of Unserviceable Bottom Stiffener And S&F New Bottom Stiffener Made Out Of 1St Class Hard Teak Wood As Per Drg And Complete All As Specified And As Directed. 11 Removal Of Unserviceable Back Stiffener And S&F New Back Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 20X25Mm As Per Drg And Complete All As Specified And As Directed. 12 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 13 Repairs To Chair Writing Drg No. Fd-280:- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Leg Of Size 890X55X30Mm Made Out Of 1St Class Hard Teak Wood 14 Removal Of Unserviceable Front Leg And S&F New Leg Of Size 685X55X30Mm Made Out Of 1St Class Hard Teak Wood 15 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Out Of 1St Class Hard Teak Wood Of Size 470X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 16 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Out Of 1St Class Hard Teak Wood Of Size 535X65X30Mm Including Drilling Holes For Weaving 12 Cm Center To Centre 17 Removal Of Unserviceable Bottom Stiffener And S&F New Bottom Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 535X25X20Mm 18 Removal Of Unserviceable Back Stiffener And S&F New Back Stiffener Made Out Of 1St Class Hard Teak Wood 19 Removal Of Unserviceable Arm Rest And S&F New Arm Rest Made Out Of 1St Class Hard Teak Wood Of Size 470X60X25Mm As Per Drg And Complete All As Specified And As Directed 20 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 21 Repairs To Chair Easy Drg No. Fd-229 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Rear Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 510X55X25Mm As Per Drg And Complete All As Specified And As Directed. 22 Removal Of Unserviceable Front Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 535X55X25Mm As Per Drg And Complete All As Specified And As Directed. 23 Removal Of Unserviceable Side Rail And S&F New Side Rail Out Of 1St Class Hard Teak Wood Of Size 575X70X40Mm As Per Drg And Complete All As Specified And As Directed. 24 Removal Of Unserviceable Front/Back Rail And S&F New Front/Back Rail Out Of 1St Class Hard Teak Wood Of Size 510X55X25Mm As Per Drg And Complete All As Specified And As Directed. 25 Removal Of Unserviceable Arm Rest And S&F New Arm Rest Out Of 1St Class Hard Teak Wood Of Size 610X65X25Mm As Per Drg And Complete All As Specified And As Directed.(Each Arms Rest Shall Be Measured Separately). 26 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 27 Repair Of Peg Table Drg No. Fd-277/384 :- S&F In Repair Following Part Of Chair Dining Of 1St Class Hard Wood Tectona Grandise As Per Existing Shape And Size Duly Planned And Finished As Shown On Drawing Complete All As Specified And Directed. Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 380X60X30Mm 28 Removal Of Unserviceable Long Rail And S&F New Long Rail Out Of 1St Class Hard Teak Wood Of Size 450X40X20Mm 29 Removal Of Unserviceable Short Rail And S&F New Short Rail Out Of 1St Class Hard Teak Wood Of Size 300X40X20Mm 30 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Out Of 1St Class Hard Teak Wood Of Size 300X40X20Mm 31 Removing The Existing Unserviceable Top Of Peg Table And S&F New Top Of Size 450X300Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge. 32 M&L For Polishing To Wooden Surfaces Of Repaired Peg Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 33 Repair To Table Dining 06/08 Person Drg No. Fd-273/Fd/Map-Ii/03 :- Removing The Existing Unserviceable/ Broken Top Of Table Dining 8 Person And Supply And Fix New Top Of 1800X900Mmx18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 34 Removing The Existing Unserviceable/ Broken Top Of Table Dining 6 Person And Supply And Fix New Top Of 1500X900Mmx18 Mm Thick Pre-Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 35 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Specie Tectona Grandise Of Size 750X75X40Mm (Each Leg Shall Be Measured Separately). 36 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 1800X100X25Mm 37 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 900X100X25Mm 38 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Of Size 900X100X25Mm Made Out Of 1St Class Hard Teak Wood 39 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 1800X100X25Mm 40 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 41 Repair Of Teapoy Drg No. Fd-278/382 :- Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 540X60X30Mm 42 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 480X50X20Mm 43 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 390X50X20Mm 44 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 390X50X20Mm 45 Removal Of Unserviceable Centre Stiffener And S&F New Centre Stiffener Made Out Of 1St Class Hard Teak Wood Specie Tectona Grandise Of Size 480X50X20Mm 46 Removing The Existing Unserviceable Top Of Teapoy And S&F New Top Of Size 600X450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 47 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 48 Repair To Table Writing Drg No. Fd-275:- Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 760X55X35Mm As Per Drg And Complete All As Specified And As Directed. 49 Removal Of Unserviceable Long Rail Of Table Frame And S&F New Long Rail Made Out Of 1St Class Hard Teak Wood Of Size 1035X50X25Mm As Per Drg And Complete All As Specified And As Directed. 50 Removal Of Unserviceable Short Rail Of Table Frame And S&F New Short Rail Made Out Of 1St Class Hard Teak Wood Of Size 530X50X25Mm As Per Drg And Complete All As Specified And As Directed. 51 Removal Of Unserviceable Drawer And S&F New Drawer Front And Sides Made Out Of 18 Mm Thick Mdf Board Exterior Grade Both Side Laminated , 6Mm Thick (Bwr Gde) Plywood At The Bottom Of Drawer Over One Set Of Powder Coated Telescopic Channels To Move The Drawers All As Per Drg And Complete All As Per Specification And As Directed. Including Chromium Plated Knob Of 40Mm Dia 52 Removal Of Unserviceable Bottom Centre Stiffener Of Table Frame And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 1035X50X25Mm As Per Drg And Complete All As Specified And As Directed. 53 Removal Of Unserviceable Bottom Side Stiffener Of Table Frame And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Teak Wood Of Size 530X50X25Mm As Per Drg And Complete All As Specified And As Directed. 54 Removal Of Unserviceable Top And S&F New Top Of Size 1145Mm X 600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade All As Directed By Ge/Engr-In-Charge 55 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 56 Repair To Table 900Mm X 600Mm Without Drawer Drg No. Fd- 284 :- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Tectona Grandise Duly Plained For Table Of Size 740X60X30Mm Complete All As Specified & Shown On Drg. 57 Removal Of Unserviceable Top Long Rail And S&F New Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 58 Removal Of Unserviceable Top Short Rail And S&F New Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 59 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 60 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 61 Removal Of Unserviceable Top And S&F New Top Of Size 900X600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 62 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 63 Repair To Table 900Mm X 600Mm With Drawer Drg No. Fd-283:- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X60X30Mm Complete All As Specified & Shown On Drg. 64 Removal Of Unserviceable Top Long Rail And S&F New Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X110X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 65 Removal Of Unserviceable Top Short Rail And S&F New Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 540X110X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 66 Removal Of Unserviceable Bottom Side Stiffener And S&F New Bottom Side Stiffener Made Out Of 1St Class Hard Wood Teak For Tableof Size 540X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 67 Removal Of Unserviceable Bottom Centre Stiffener And S&F New Bottom Centre Stiffener Made Out Of 1St Class Hard Wood Teak For Table Of Size 780X60X20Mm All As Per Drg And Complete All As Per Specification And As Directed. 68 Removal Of Unserviceable Drawer And S&F New Drawer Front And Sides Made Out Of 600X300X18 Mm Thick Mdf Board Exterior Grade Both Side Laminated , 6Mm Thick (Bwr Gde) Plywood At The Bottom Of Drawer With Aluminium Anodised Knob Of Approved Quality And One Set Of Powder Coated Telescopic Channels To Move The Drawers All As Per Drg And Complete All As Per Specification And As Directed. 69 Removal Of Unserviceable Top And S&F New Top Of Size 900X600Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 70 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 71 Repair To Table Centre Drg No. Fd-274 :-Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Of Size 380X60X30Mm Teak For Table Of Size Complete All As Specified & Shown On Drg. 72 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Of 1St Class Hard Wood Teak For Table Of Size 780X50X20Mm Complete All As Specified & Shown On Drg. 73 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Of 1St Class Hard Wood Teak For Table Of Size 390X50X20Mm Complete All As Specified & Shown On Drg. 74 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 390X50X20Mm Complete All As Specified & Shown On Drg. 75 Removing The Existing Unserviceable Table Top Of Table Centre And S&F New Top Of Size 900X450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 76 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 77 Repair To Table 900Mm X 900Mm Drg No. Fd-291:- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X55X35Mmcomplete All As Specified & Shown On Drg. 78 Removal Of Unserviceable Long Rail And S&F New Long Rail Made Of 1St Class Hard Wood Teak For Table Of Size 830X75X25Mm Complete All As Specified & Shown On Drg. 79 Removal Of Unserviceable Short Rail And S&F New Short Rail Made Of 1St Class Hard Wood Teak For Table Of Size 790X75X25Mm Complete All As Specified & Shown On Drg. 80 Removing The Existing Unserviceable Table Top Of Table 900X900Mm And S&F New Top Table 900X900Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 81 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 82 Repair Of Table Dressing Gents Drg No. Fd-230:- Removing The Existing Unserviceable/ Broken Mirror With 6Mm Thick Back Plywood Of Table Dressing Gents And Supply And Fix New Mirror Of Size 760X380Mm Minimum 6 Mm Thick Suitable For The Existing Frame Alongwith 6Mm Thick Bwp Grade Plywood Back All As Per Existing And Shown On Drg. 83 Removing The Existing Unsv/Broken Back Sides Of Table Dressing Gents And S&F In Repair New Back Sides Made Out Of 6Mm Thick (Bwr Gde) Plywood All As Directed By Ge/Engr-In-Charge 84 Removing The Existing Unsv/Broken Top Of Table Dressing Gents And S&F In Repair New Top Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 85 Removing The Existing Unserviceable/ Broken Drawers Of Table Dressing Gents And Supply And Fix New Drawers Front Made Of 18 Mm Thick Prelaminated Mdf Board And Bottom Of Drawer With 6 Mm Thick Bwr Grade Plywood Duly Fixed With Aluminium Anodised Knobs 40 Mm Complete All As Per Existing And Shown On Drg. 86 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Polish All As Directed To Obtain Glossy Finish 87 Chair Easy With Cushion Drg No Fd-358 :- Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Wood Teak Rear Leg Of Size 510X70X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 88 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 535X70X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 89 Removal Of Unserviceable Side Rail And S&F New Side Rail Made Of 1St Class Hard Wood Teak For Table Of Size 575X70X25Mm Complete All As Specified & Shown On Drg. 90 Removal Of Unserviceable Front/Back Rails Of Seat Frame And S&F New Front/Back Rails Made Of 1St Class Hard Wood Teak For Table Of Size 510X55X20Mm Complete All As Specified & Shown On Drg. 91 Removing The Existing Unserviceable/ Broken Arm Rest And Supplying And Fixing 1St Class Hard Wood Teak Arm Rest Of Size 610X65X25Mm Complete All As Specified And Shown On Drgs (Each Arms Shall Be Rest Measured Separately). 92 S&F Of Cushion Foam For Chair Easy 50-55Mm Density 75Mm Thick (Make-Sleepwell) Duly Covered With Best Quality Tapestry Cloth Complete All As Directed And Specified Note:- Rate Of Tapestry Cloth Shall Not Be Less Than Rs 350/- Per Rm 93 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 94 Re-Canning Of Chairs Drg No. Fd-228,229, 279,280,252,244 :- Removing The Existing Unserviceable/ Broken Plastic Cane And Supplying And Canning With New Plastic Cream Colour Cane 2 Mm Wide And 0.5Mm Thick, 4 Mm Thick For Borders For Canning Of Chair Of All Types Including Bin Soiled Linen, Stool Dressing Complete As Per Godrej Pattern. 95 Chair Dining Cushioned Drg No. Fd/Map-Ii/04 :- Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Teak Wood Rear Leg Of Size 950X50X35Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 96 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 450X50X35Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 97 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Made Of 1St Class Hard Wood Teak For Table Of Size 450X65X25Mm Complete All As Specified & Shown On Drg. 98 Removal Of Unserviceable Front/Back Rail Of Seat Frame And S&F New Front/Back Rail Made Of 1St Class Hard Wood Teak For Table Of Size 450X90X25Mm Complete All As Specified & Shown On Drg. 99 Removing The Existing Worn Out Seat Cushion And S&F New Pu Foam Seat Foam Of Size 450X450X75Mm Thick, Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwp Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 100 Removal Of Unserviceable Bottom Stiffener Of Seat Frame And S&F New Bottom Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 450X20X25Mm Complete All As Specified & Shown On Drg. 101 Removal Of Unserviceable Vertical Back Stiffener Of Seat Frame And S&F New Vertical Back Stiffener Made Of 1St Class Hard Wood Teak For Table Of Size 500X30X15Mm Complete All As Specified & Shown On Drg. 102 Removal Of Unserviceable Nylon Buffers From The Bottom Of Legs And S&F New Nylon Buffers On The Bottom Of Leg. 103 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 104 Repair Of Table Bed Side Drg No. Fd-276 :- Removal Of Unserviceable Top And S&F New Top Of Size 230Mm X 450Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 105 Removal Of Unserviceable Side And S&F New Side Of Size 510X230Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 106 Removal Unserviceable Plywood At Back Of Table Bed Side And S&F New Back Of Size 510X450Mm Made Of Plywood 6Mm Thick Bwr Gde As Per Drg And Complete All As Directed. 107 M&L For Melamine Polishing Of Complete Table Exposed To View Except Laminated Portion Per Drg And Complete All As Specified And As Directed. 108 Repair To Side Board Drg No. Fd-371 :- Removal Of Unserviceable Top And S&F New Top Of Size 1220X455Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 109 Removal Of Unserviceable Shelves Of Side Board And S&F New Shelves Of Side Board Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 110 Removing The Unserviceable/ Broken Drawers Of Side Board And Supply And Fixing New Drawers Of Size 455X385Mm Made Of Front 18 Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade Both One Side Laminated And Other Side White Balancing Paper Rest All The Sides Bottom Etc To Be Made Out Of 12Mm Thick Plmdf Board Exterior Grade,Also Fixing Of 40 Mm Knob Of Matching Colour As Per Shade Of Board, Alongwith One Set Of Telescopic Channel Complete All As Per Existing And Shown On Drg. 111 Removing The Existing Unserviceable/ Broken Shutter Of Side Board And Supply And Fix New Shutter Of Size 400X650Mm Made Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003) The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest/Naina Teak Fixed With 40 Mm Wide Chromium Plated Continuous Piano Hinges Including Cp Handle, 100 Mm Long,01 Nos Knob And Magnetic Catcher To Stick The Doors. Edges Of The Shutters To Be Covered Pvc Beading 2Mm Thick Machine Pressed All Around, Complete All As Specified And Shown In Drg. (Note: Each Leaf To Be Measured Separately). 112 Removing The Unserviceable Broken Back Ply Of Side Board And Supply And Fixing New 6 Mm Thick Bwp Grade Plywood Of Size 1220X635Mm Conforming To Is: 710 All As Specified And Shown On Drg. 113 Removing The Unserviceable/ Broken Leg Of Side Board And Supply And Fixing 4 Nos Of New Leg At The Bottom Frame Made Out Of Ist Class Hard Wood (Teak) Of Size 125X45X45Mm 114 M&L For Melamine Polishing Of Complete Side Exposed To View Except Laminated Portion Per Drg And Complete All As Specified And As Directed. 115 Repair Of Table Dressing Ladies Drg No. Fd-251 :- Removing The Existing Unserviceable/ Broken Mirror With 6Mm Thick Back Plywood Of Table Dressing Ladies And Supply And Fix New Mirror Of Size 1220X366Mm Minimum 6 Mm Thick Suitable For The Existing Frame Alongwith 6Mm Thick Bwr Grade Plywood Back All As Per Existing And Shown On Drg. 116 Removal Old U/S Back Plywood Of Glass And Fixing 1220X766X6 Mm Thick Bwp Grade Plywood Conforming To Is: 710 Of Existing Shape & Size 117 Removal Of Old U/S Sliding Glass And Fixing New Glass Of Size 550X300X5.5Mm Thick As Per Existing. 118 Removing The Existing Unsv/Broken Top Of Table Dressing Ladies And S&F In Repair New Top Of Size 900X380Mm Made Out Of 18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 119 Removal Of Old U/S Leg Of Table And Fixing New Legs Of Size 150X45X45Mm 1St Class Hard Wood (Teak) 120 Removing The Existing Unserviceable/ Broken Drawers Of Table Dressing Ladies And Supply And Fix New Drawers Front Made Of 18 Mm Thick Prelaminated Mdf Board And Bottom Of Drawer With 6 Mm Thick Bwr Grade Plywood Over One Set Of Powder Coated Telescopic Channels To Move The Drawers Duly Fixed With Aluminium Anodised Knobs 40 Mm Complete All As Per Existing And Shown On Drg. 121 Preparation Of Old Surface And French Polishing To Table Dressing Ladies Except Laminated Portion All As Directed. 122 Repair Of Trestle Store Room Wooden Drg No. Fd-141(M):-Removing Existing Unsv Legs Of Trestle Store Room Wooden And S&F New Legs Made Out Of 1St Class Hard Wood Teak Of Size 300X100X100Mm As Per Drg . 123 Removing Unsv Long Rails Of Trestle And S&F New Long Rails Made Out Of 1St Class Hard Wood Teak Of Size 2450X100X100Mm 124 Removing Unsv Vertical Stiffeners Of Trestle And S&F New Stiffeners Made Out Of 1St Class Hard Wood Teak Of Size 400X100X65Mm 125 Removing Unsv Horizontal Stiffeners Of Trestle And S&F New Stiffeners Made Out Of 1St Class Hard Wood Teak Of Size 600X100X65Mm 126 M&L For Smoothening Surfaces With Sand Paper Of Trestle Wooden And Repainting The Old Painted Surface With One Coat Of Synthetic Enamel Paint Black Colour Complete All As Specified And Directed. 127 Repairs To Bed Ply Wood Top Drg No. Fd-245,246 :- Removing The Existing Unserviceable/Broken Head Board Including Legs And Supply & Fixing New Head Board Of Size900X 460Mm For Bed Ply Wood Top Including Teak Wood Legs Of Size 600X60X60Mm All As Specified And Shown On Drg 128 Removing The Existing Unserviceable /Broken Foot Board Including Legs And Supply & Fixing New Foot Board Of Size 900X300X32Mm For Bed Plywood Top Including Teak Wood Legs And French Polishing Complete All As Specified And Shown On Drgs. 129 Removing The Existing Unserviceable/ Broken Long Rail And Supplying And Fixing New 1St Class Hard Wood Teak Long Rail Of Size 1920X90X30Mm For Charpoy Wooden Including French Polishing All As Specified And Shown On Drg (Each Long Rail Shall Be Measured Separately). 130 Removing The Existing Unserviceable/ Broken Short Rail And Supplying And Fixing New 1St Class Hard Wood Teak Short Rail Of Size 900X100X40Mm For Charpoy Wooden All As Specified And Shown On Drg (Each Short Rail Shall Be Measured Separately). 131 Removing The Existing Unserviceable/ Broken Stiffener And Supplying And Fixing New 1St Class Hard Wood Teak Stiffener Of Size 840X50X50Mm For Charpoy Wooden All As Specified And Shown On Drg (Each Stiffener Shall Be Measured Separately). 132 Removing Unsv Ms Bracket And S&F Flat Iron 25X3Mm,200Mm Bracket Long Fixed With Screw All As Specified And Shown On Drg 133 Removing The Existing Unserviceable /Broken Ply Wood Top And Supply And Fixing New 12 Mm Thick Bwp Plywood Of Size 1980X900Mm Exterior Grade Complete All As Shown On Drg And As Specified. 134 M&L For Polishing To Wooden Surfaces Of Repaired Bed (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 135 Repair To Bench Workshop Wooden Drg No. Fd-301 :- Taking Down Old U/S Top Of Bench Workshop Wooden And S&F New Top Of Soze 1500X900X40Mm Thick 1St Class Hard Wood Complete All As Specified And Directed. 136 Removing Of Old Unserviceable Drawer And S&F Of New Drawer Of Size 900X450Mm Made Of 1St Class Teak Wood With 12 Mm Thick Plywood On Bottom Of Drawer Complete All As Specified And Directed. 137 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 760X75X40Mm As Per Drg And Complete All As Specified And As Directed. 138 Removal Of Unserviceable Long Rail And S&F New Long Rail Out Of 1St Class Hard Teak Wood Of Size 1500X125X25Mm As Per Drg And Complete All As Specified And As Directed. 139 Removal Of Unserviceable Short Rail And S&F New Short Rail Out Of 1St Class Hard Teak Wood As Per Drg 900X125X25Mm And Complete All As Specified And As Directed. 140 Removal Of Unserviceable Side Stiffener And S&F New Side Stiffener Out Of 1St Class Hard Teak Wood Of Size 900X50X25Mm As Per Drg And Complete All As Specified And As Directed. 141 M&L For Polishing To Wooden Surfaces Of Repaired Bench (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 142 Chair Dining Long Back Drg No. Fd-357 :-Removing The Existing Unserviceable/Broken Rear Leg And Supplying And Fixing 1St Class Hard Teak Wood Rear Leg Of Size 1120X50X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately) 143 Removing The Existing Unserviceable/ Broken Front Leg And Supplying And Fixing 1St Class Hard Wood Teak Front Leg Of Size 450X50X25Mm Complete All As Specified And Shown On Drgs (Each Leg Shall Be Measured Separately). 144 Removal Of Unserviceable Side Rail Of Seat Frame And S&F New Side Rail Out Of 1St Class Hard Teak Wood Of Size 450X50X25Mm As Per Drg And Complete All As Specified And As Directed. 145 Removal Of Unserviceable Front/Back Rails Of Seat Frame And S&F New Front/Back Rails Out Of 1St Class Hard Teak Wood Of Size 465X50X25Mm As Per Drg And Complete All As Specified And As Directed. 146 Removing The Existing Worn Out Seat Cushion And S&F New Pu Foam Seat Foam Of Size 450X400X75Mm Thick, Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwr Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 147 Removing The Existing Worn Out Back Cushion And S&F New Pu Foam Back Foam Density 50-55 Kg/Cum With 12 Mm Thick Plywood Bwr Grade Phenol Bonded Covered With Tapestry Cloth Of Not Less Than 350/- Per Rm For Chair Dining Cushioned Complete All As Specified And Shown On Drawing. 148 Removing The Existing Unserviceable/ Broken Bottom Stiffener And Supplying And Fixing 1St Class Hard Wood Teak Bottom Stiffener Of Size 450X40X25Mm Complete All As Specified And Shown On Drgs. 149 Removing The Existing Unserviceable/ Broken Nylon Buffers On The Bottom Of Legs And S&F New Nylon Buffers Complete All As Specified And Shown On Drgs. 150 M&L For Polishing To Wooden Surfaces Of Repaired Chairs (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 151 Repair To Table 600Mm X 600Mm Drg No. Fd-293 :- Removal Of Unserviceable Leg And S&F New Leg Made Of 1St Class Hard Wood Teak For Table Of Size 740X55X35Mm Complete All As Specified & Shown On Drg. 152 Removal Of Unserviceable Top Long Rail And S&F New Front Top Long Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 530X50X25Mm All As Per Drg And Complete All As Per Specification And As Directed. 153 Removal Of Unserviceable Top Short Rail And S&F New Front Top Short Rail Made Out Of 1St Class Hard Wood Teak For Table Of Size 490X50X25Mm All As Per Drg And Complete All As Per Specification And As Directed. 154 Removal Of Unserviceable Top And S&F New Top Of Size 600X600Mm Made Out Of18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade. Edges Of The Mdf Board To Be Fixed With 2Mm Thick Pvc Beading Machine Glued All Around With Matching Colour All As Directed By Ge/Engr-In-Charge 155 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 156 Repairs To Rifle Rack For 6/10/12/18 Drg No. Hq/134/F/22/89 :- Removing Existing Unsv Legs Of Rack Rifles Wooden And S&F New Legs Made Out Of 1St Class Hard Wood Teak Of Size 100X100X900Mm As Per Drg . 157 Removing Unsv Top Plank Of Rack Rifle And S&F New Plank Made Out Of 1St Class Hard Wood Teak Of Size 1200X150X50Mm 158 Removing Unsv Bottom Plank Of Rack Rifle And S&F New Plank Made Out Of 1St Class Hard Wood Teak Of Size 1200X250X50Mm 159 M&L For Polishing To Wooden Surfaces Of Repaired Rifle Rack(Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 160 Repair To Table Dining 04 Person Drg No. Fd-273 :- Removing The Existing Unserviceable/ Broken Top Of Table Dining 4 Person And Supply And Fix New Top Of 1200X900Mm X18 Mm Thick Pre Laminated Mdf Board Exterior Grade I & Type Ii (Plmdf-12 Designation) Conforming To 14587:1998 (Re-Affirmed 2003)The Colour Of The Prelaminated Mdf Board Shall Be Of Shade Beige/Chocolate/Mehogany/Wall Nut Chest Shade With Edges Covered With 2Mm Thick Edge Bending Tape Duly Machine Gluded All As Directed By Ge/Engr-In-Charge 161 Removal Of Unserviceable Leg And S&F New Leg Made Out Of 1St Class Hard Teak Wood Of Size 750X75X40Mm As Per Drg And Complete All As Specified And As Directed. (Each Leg Shall Be Measured Separately). 162 All As Per Item No 26.01 Here-In-Before But Top Long Rails Of Table Dining (Each Rail Will Be Measured Separately). 163 All As Per Item No 26.01 Here-In-Before But Top Short Rails Of Table Dining (Each Rail Will Be Measured Separately). 164 All As Per Item No 26.01 Here-In-Before But Bottom Side Stiffiner Of Table Dining (Each Stiffener Will Be Measured Separately). 165 All As Per Item No 26.01 Here-In-Before But Bottom Centre Stiffiner Of Table Dining (Each Stiffener Will Be Measured Separately). 166 M&L For Polishing To Wooden Surfaces Of Repaired Table (Old And New Surfaces) Complete By Preparation Of The Surface By Scrapping The Old Surface By Sand Paper And Applying Two Coats Of Melamine Pcolish All As Directed To Obtain Glossy Finish 167 Repair Of Hat Stand With Mirror Drg No. Fd-233 ;- Removing Unsv Veeneerply From Hat Stand And S&F New Veneerply Teakshade Of Size 1000X700Mm Of Bwr Grade
Basic Detail
Tender No 8834/E8
Bidding Type Tender
Location
City Barmer
State Rajasthan
Key Dates
Publish Date 24 Oct 2026
Submission Date 13 Nov 2026
Open Date 16 Nov 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
b160a115-bc0e-4406-87f0-d77536f81633.html
BOQ_892245.xls
TENDERDOC.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Nov 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
html

b160a115-bc0e-4406-87f0-d77536f81633.html

xls

BOQ_892245.xls

pdf

TENDERDOC.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender