Power Boards / Undertakings / PSU Closing in 1 days TDR #58204914

Tender For Capital Works - Earthmat Extension And Metalling Work Beyond 220Kv Fencing Side At 220Kv Substation, Edamon

Issued by Boards / Undertakings / PSU · Kollam, Kerala
Tender Value
8.75 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
1 days left
EMD
21900
Bank guarantee accepted
Document Fee
2124
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Capital Works - Earthmat Extension And Metalling Work Beyond 220Kv Fencing Side At 220Kv Substation, Edamon

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-Nov-2026 Date Extension Corrigendum -1 Date 24-Nov-2026

BOQ

Name of Work:- Capital Works - Earthmat extension and metalling work beyond 220kV fencing side at 220kV Substation, Edamon
Sl. No. Item Description
1Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge:
2Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size)
5Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
6Centering and shuttering including strutting propping etc and removal of form work for Foundations, footings, bases of columns, etc. for mass concrete etc.,as per the direction of Dept. Officers at site
7Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers
8Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts
9Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding wire including cost of TMT bar labour charges etc. compleate for beams, coloumns, etc. as per the direction of the Depart. Officers at site.
10Providing and laying in position specified grade of Reinforced cement concreate 1:1.5:3 using graded aggregates but excluding the cost of centering, shuttering,finishing and reinforcement , etc.complete as per direction of the deptl. officers at site-
11Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
12Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
13Plastering with CM1:3,12mm thick one coat floated hard and trowelled smooth over concrete surface.
14Back filling with available excavated earth in trenches,plinth,sides of foundtion etc in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m
15Finishing walls with Acrylic Smooth exterior/interior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior/interior primer applied @ 2.20 kg/10 sqm).
16Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
17Conveying,laying and spreading 6mm/40mm broken stone on the levelled surface of the yard at uniform thickness of 10cm as per direction of departmental officers at site.
18Supplying and stacking 6mm blue/Black broken stone of approved quality at specified area in standard heaps for measurement as directed by departmental officers at site
19Cutting 32mm MS rod in required length etc complete as per the direction of the departmental officers.
20Bending 32mm MS rod for crossing cable trench/foundations/risers etc.
21Laying of earth mat of required size as specified using 40/32/25mm MS rod including levelling lowering and placing in trenches, complete as per the direction of departmental officers.
22Welding of overlapping joints for mat,riser lap joints with 32/25mm MS rod placed in trenches, having 150mm in length 6mm in thick on both sides of the rod and both ends of overlapped MS rods with 6mm welding thickness after cleaning the surfaces neatly. Charges includes cost of low hydrogen DC electrode (No. E7018), hire charges of DC arc welding set and tools and plants required, current charges including labour charges for holding MS rod in position and applying two coats of anti corrosive paints at the welded joints etc. complete as per the directions of department officers.
23Welding the nodal points (cross joints ) in the trenches at two sides to a thickness of 6mm after cleaning the surface neatly. Charges includes cost of low hydrogen DC electrodes (No. E7018), hire charges of DC welding set and tools and plants required, current charges, labour charges for holding MS rod in position and applying two coats of anti corrosive paints at the welded joints etc. complete as per the directions of departmental officers.
24Laying of departmentally supplied GI strip/ Copper strip of suitable size including cleaning and neatly bending of strips ,cutting, removing of metal/earth in the yard and burying earth strip to the required depth re-doing the yard metalling as per the direction of the departmental officers.
25Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip & other end of the strip with yard structure at 2 points 50mm apart each welding points having 50mm length and 6mm thick on both sides & end of the strip including the charges for connecting the strip with structure using bolted joints as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete.
26Welding overlapping joints of 50x6mm GI strip with 50mm long, 6mm thick welding on all three sides after doing 2 Nos. bolted joints at the centre as specified after cleaning the surface. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes( No.E7018) cost of anti corrosive paint etc. complete.
27Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip and connecting other end with nuts & bolts if required as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58204914
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 8.75 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Capital Works - Earthmat Extension And Metalling Work Beyond 220Kv Fencing Side At 220Kv Substation, Edamon
Basic Detail
Tender No AEE/EDN/TN-03/26-27/24.10.26
Bidding Type Tender
Location
City Kollam
State Kerala
Key Dates
Publish Date 11 Nov 2026
Submission Date 24 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 8.75 Lakhs
Tender Fee 2124
EMD 21900
Exemption Not Available
Document List
BOQ_1501479.xls
e2921284-6309-4bf0-81e6-4ec5ab35959b.html
tenderdocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1501479.xls

html

e2921284-6309-4bf0-81e6-4ec5ab35959b.html

pdf

tenderdocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender