Tender For Beautification Of Town Kupwara
Tender Value
1.01 Crore
Estimated cost
Bid Submission
02 Nov 2026
2 days left
EMD
2.04 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Of Town Kupwara
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Ordinary Rock |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5mm |
| 3 | Providing & laying of stone soling tightly hand packed on horizontal level incld. Hand ramming and all carriages upo site of work complete |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103... accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; as per direction of the engineer-in-charge; All works upto plinth level |
| 6 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level upto floor five level, including curing but excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1½:3 (1 cement:1½ coarse sand :3 graded crushed stone aggregate 20 mm nominal size). |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with ( 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 200 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. |
| 9 | Centring and shuttering: Columns, pillars, piers, abutments, posts (Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns pedestal upto plinth level |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls |
| 14 | PIL and placing high strength deformed steel including costbinding Wire ncrmc-MeehanicaIIy Treated bars of grade F5000 or more |
| 15 | Supplying and filling in plinth with fine sand under floors including watering, ramming, consolidating and dressing complete |
| 16 | Brick work with F.P.S bricks of class designation 75 in foundation & Plinth in cement mortar in 1:6 (1 cement: 6 coarse sand) ncl. carriages ofbricks upto site of work complete including extra upto floor V-level. incl. all carriages of material involved. |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position... Imported Wood |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows... Imported Wood |
| 20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters... Imported Wood |
| 21 | Providing, fabricating and fixing decorative CNC laser cut MS window panel fabricated from 3 mm thick IS 2062 Grade-B MS plate fixed in 50x50x3 mm MS hollow section frame.. |
| 22 | 15mm cement plaster on rough side of single or half brick wall in 1:6 (1 cement: 6 fine sand mortar) |
| 23 | 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
| 24 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 mtrs height above ground level.. |
| 25 | Providing and fixing of 25mm Devri stone tile cladding over 15mm cement plaster in 1:4 mix complete including varnish, cost of all materials, leads, lifts and carriages etc upto site of work complete |
| 26 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work. |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood/steel works |
| 28 | Cement concrete flooring 50mm M-15 grade, with 20 mm nominal size stone agg. finished with neat coat of cement slurry |
| 29 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 30 | Providing colour coated Hi-rib profile sheet roofing of approved brand & manufacture... |
| 31 | Providing and fixing of 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size.)incl. all carriages of material involved. |
| 32 | Providng and fixing of eaves boarding 250mm×32mm nominal size 2nd class Deodar wood Incl necessary nail screws handling rehandling all fitting and fixtures complete |
| 33 | Providing and fixing Soffits 20mm thick Deodar wood planks |
| 34 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix |
| 35 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine… |
| 36 | Providing, fabricating, supplying and fixing 3D Stainless Steel Letters made from SS Grade 304 mirror/brushed finish as approved by the Engineer-in-Charge... (WELCOME TO KUPWARA) |
| 37 | Providing, fabricating, supplying and fixing 3D Stainless Steel Letters made from SS Grade 304 mirror/brushed finish as approved by the Engineer-in-Charge... (THANKS VISIT AGAIN) |
| 38 | Providing, fabricating, supplying and fixing 1200 mm diameter Logo Board with UV printed logo, SS mirror finish border, SS back frame, SS anchor fasteners, chemical anchors, complete (PWD R&B Division Kupwara) |
| 39 | Carriage of materials: a) Stone agg. Below 40mm size Avg. 25 Km |
| 40 | Carriage of materials: b) Sand Avg. 25 Km |
| 41 | Carriage of materials: c) Bricks Avg. 110 Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender