Tender For Construction Of Ladies Toilet And Additional Work At Town Hall Library Sahibganj
Tender Value
12.07 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
25000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sahebganj → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ladies Toilet And Additional Work At Town Hall Library Sahibganj
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level.1 : 1.5:3 (1 cement :1.5 course sand (zone-III): 43graded stone aggregate 20 mmnominal size. |
| 2 | Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttersses, plinth and string cource, filleets, columns, pillars, piers, cource, filleets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone III) : 3 Graded stone aggregate 20 mm nominal size) |
| 3 | Providing designation 75 A brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mm nominal size) |
| 5 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 6 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 7 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 8 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 9 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 10 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | paint of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors |
| 15 | Providing two coat of painting with ready mixed paint of approved shade make over steel surface including cleaning the surface throughly scaffolding and taxes all complete as per building specification and direction of E/I |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 18 | Add carriage cost of materials i) Cement lead 11 km |
| 19 | ii) steel lead 11 km |
| 20 | iii) Sand lead 61 km |
| 21 | iv) Chips lead 7 km |
| 22 | v) Bricks lead 27 km |
| 23 | Supply and installation of P.V.C. over head water tank- ----all complete as per direction E/I |
| 24 | Supply of G.I. pipes of Tata or any other ---------- all complete job as per direction of E/I. (i) 15mm dia |
| 25 | II) 20MM DIA |
| 26 | III) 32MM DIA |
| 27 | Providing and fixing male ended 15mm dia brass bib cock -------- all complete as per direction of E |
| 28 | Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I. (A)BRASS STOP COCK (a) 15mm dia. |
| 29 | Providing and fixing G.M. full way valve --------------------- all complete as per direction (C) 25mm dia weight not less than 1.5 kg. |
| 30 | (d) 32mm dia weight not less than 1.5 kg |
| 31 | Supplying fitting and fixing the following items complet with all material s as per direction of E/I. (b) (i) 600x450mm mirrors of 6mm thick., |
| 32 | ©(iii) C.P. brass soap dise contineer medium a good quality with screw and hinge etc. |
| 33 | supply materials labour for Ladies Urinal Complete set. |
| 34 | Supplying fitting and fixing viterous waterland earth ware I.W..C or Tarry Hindustan or any other I.S.S. approved makewith 100mm H.C.I.'P' trap15litress.1. orcopull andlet go flushing ------------- all complete as per direction of E/I. (A) 580mm long (a) 10 lit high level .C.I. cisterns |
| 35 | Supplying fitting and fixing viteriouswhite glazed earthan ware wash hand basin ---------------------------------all complete as per direction of E/I |
| 36 | Wiring for light point/fan point/exaust fan point / callbellpoint with 1.5sq.mm FRPVC insulated copper conductor single core cable in surface/recrssed PVC conduit,with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc.as. |
| 37 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 38 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as requiredCIRCUIT / SUBMAIN WIRING 2x2.5 sq mm + 1x2.5 sq mm earth wire |
| 39 | 2x4.00 sq mm + 1x4.5 sq mm earth wire |
| 40 | 2x6.00 sq mm + 1x6.00 sq mm earth wire |
| 41 | S/V PVC/ G.I. boxes :- Supplying and fixing PVC/G.I box of following sizes on surface or in recessed with sutiable size of phenolic laminated sheet cover infront including painting etc as requried 72 mm x 146 mm x 48 mm deep / (4\\" x 7\\" ) |
| 42 | 210 mm x 206 mm x 48 mm deep / (10\\" x 12\\" ) |
| 43 | S/F power plug point with pinao type accessories :-supplying and fixing suitable size G.I./PVC box on surface or in recess with phenolic liminated sheet cover in front including providing and fixing 6 pin 15/16 mps socket outlet and 15/16 mps piano type switch connection, painting etc. us rquoired |
| 44 | S/F lpower plug point with piano type accessories Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with piano type accessories :- |
| 45 | S/F celling rose : Supplying and fixing 2 pin 5 amp. Celling rose on the existing junction box/ wooen block including connection etc. as requried. S/F celling rose :- |
| 46 | S/S/F Batten holder : Supplying and fixing battrn / angle holder including connection etc as requried. F Batten holder :- |
| 47 | ITC. Exhaust fan upto 450 mm sweep. Installation of exhaust fan upto 450 mm sweep in the existing opening , including making the hole to suit size of the size of the above fan , making good the damage , connection , testing , commissioning etc. as |
| 48 | S/F rewireable double pole / TP&N switch disconnector: Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as 11 2.1.2 32 amps, double pol |
| 49 | SUPLY 15/16 W LED BULB |
| 50 | 12\\" 300MM MATEL EXHUST FAN |
| 51 | providing ply wood partion up to 2.5 m hight with 4mm thick commerical ply wood of standerd make fitted and fix both sides over sal wood frame of 50x50mm horiz members including cost of anchoring the partitior to floors and wall properly and provinding 2 coats of senthetic enamel paint over a coat of priming of approved shade and make and leaving space for doors if necessary all complete as per drawing specification and direction of E/I. |
| 52 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed onwooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).9.140.1 9mm thick commercial ply conforming to IS : 1328 BWR type |
| 53 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conformingto IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick |
| 54 | Supplying all material ,Labour Required for site Clearance & Dismental Required Portion….............. |
| 55 | Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm |
| 56 | Providing and laying APP (Atactic Polypropylene Polymer modifiedprefabricated five layer, 3 mm thick water proofing membrane, blackfinished reinforced with glass fibre matt consisting of a coat of bitumenprimer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre andviscocity 70 - 160 cps. Over the primer coat the layer of membraneshall be laid using butane torch and sealing all joints etc., andpreparing the surface complete. The vital physical and chemicalparameters of the membrane shall be as under : Joint strength inlongitudinal and transverse direction at 23°C as 350/300 N/5 cm.Tear strength in longitudinal and transverse direction as 60/80N.Softening point of membrane not less than 150°C. Cold flexibilityshall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorisedapplicator of the manufacturer of membrane : 3 mm thick |
| 57 | Add cost of S/B and Photography |
| 58 | Add . 18 % GST |
| 59 | add 1 % labour cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender