Tender For Providing Illumination, Electrical Works, Audio System And Projection Mapping At Bandra Fort, Mumbai
Tender Value
9.48 Crore
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
4.74 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Illumination, Electrical Works, Audio System And Projection Mapping At Bandra Fort, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | PACKAGE 1 — ILLUMINATION & ELECTRICAL WORKS | SUBWORK 1: ILLUMINATION Supply, installation, testing and commissioning of Linear Surface Luminaire (1000mm length), 24W, IP67 / IK07, 24V DC, extruded aluminium housing with fluorocarbon paint & brushed SS trim, tempered glass visor (1000 kg static load). Anti-glare tilted louver optics (Beam: 10°×22°), CRI 90+, 1050 lm, SDCM <3, PF >0.95, THD <10%, L80B10, 50,000 hrs. Complete with remote/integrated driver, mounting brackets, and all necessary accessories as required. Standard Warranty 5 Year. |
| 2 | Supplying, fixing and commissioning of Adjustable Surface Mounted Projector Light IP65 with RAL finish LED 45W , RGBA CCT, MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, Ambient temperature 25° C, L&B Ratio L80/B20 with Lumen Maintenance LM80, CRI 80 including DMX driver. Standard Warranty 5 Years. |
| 3 | Supply, installation, testing and commissioning of LED PAR Light, 70W IP65 / IK07 Outdoor LED PAR RGBW Architectural Spot/Wash Luminaire, operating on 100–240V AC. Die-cast aluminum (6061) body with epoxy powder coating and tempered glass visor. 45° beam angle, CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via 7-channel DMX-512 (daisy-chain loop-in/out) / manual controls with dimming & strobe functions. Complete with mounting bracket/stand. Standard Warranty 5 Year. |
| 4 | Supply, installation, testing and commissioning of LED PAR Light, 100W, IP65 / IK07 Outdoor LED PAR RGBW Architectural Spot/Wash Luminaire (300×210×340 mm), operating on 100–240V AC. Die-cast aluminum body (6061) with polyester epoxy powder coating and tempered glass visor. 25° beam angle, CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via 8-channel DMX-512 (loop-in/out) / manual tactile controls with dimming & strobe modes. Complete with mounting bracket/stand, C-clamp, safety bond, and necessary power/DMX cabling. Standard Warranty 5 Year. |
| 5 | Supply, installation, testing and commissioning of LED PAR Light 40W IP65 / IK07 Outdoor LED PAR RGBW Architectural Spot/Wash Luminaire (181×129×200 mm), operating on 100–240V AC. Die-cast aluminum body (6061) with polyester epoxy powder coating and tempered glass visor. 45° beam angle, CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via 7-channel DMX-512 (loop-in/out) / manual tactile controls with dimming & strobe modes. Complete with mounting bracket/stand, C-clamp, safety bond, and necessary power/DMX cabling. Standard Warranty 5 Year. |
| 6 | Supply, installation, testing and commissioning of LED PAR Light, 100W, IP65 / IK07 Outdoor LED PAR RGBW Architectural Spot/Wash Luminaire (300×210×340 mm), operating on 100–240V AC. Die-cast aluminum body (6061) with polyester epoxy powder coating and tempered glass visor. 45° beam angle, CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via 8-channel DMX-512 (loop-in/out) / manual tactile controls with dimming & strobe modes. Complete with mounting bracket/stand, C-clamp, safety bond, and necessary power/DMX cabling.. Standard Warranty 5 Year. |
| 7 | Supply, installation, testing and commissioning of Moving head light minimum 400W IP65 / IK07 Outdoor LED Moving Head Luminaire (100–240V AC), Die-cast aluminum (6061) housing with tempered glass visor. Ultra-narrow 1.2° beam, Pan 540°, Tilt 245°, 14-color wheel + blank, 17 metal gobos + blank, rotating honeycomb prism wheel. CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via 17-channel DMX-512 / RDM with dimming and strobe functions. Complete with mounting clamps, safety bond, and IP connectors. Standard Warranty 5 Year. |
| 8 | Supply, installation, testing and commissioning of LED Gobo Projector Light, 500W IP65 / IK07 Outdoor LED RGBW Gobo Projector Light (390×216×342 mm), operating on 100–240V AC. Powder-coated aluminum alloy body with tempered glass visor. Rotating GOBO with 4 patterns, 17°/28° beam angle, effective projection distance 1–40m at night. CRI 90+, SDCM <3, PF >0.95, THD <10%, L80B10 50,000 hrs. Controlled via DMX-512. Complete with adjustable 'U' support bracket, power/DMX cabling, and mounting accessories. Standard Warranty 5 Year. |
| 9 | Supply, installation, testing and commissioning of DMX-512 Splitter/Booster. The unit shall feature a minimum of one (1) DMX input with internal line termination and six (6) independent opto-isolated DMX outputs, fitted with standard 5-pin AXR (XLR) connectors. The front panel shall include dedicated LED indicators for Power On and DMX Data Activity. Complete with 100-240V AC power supply, mounting accessories, internal connections, and commissioning as per site requirements. |
| 10 | Supply, installation, testing, and commissioning of Network lighting control Art-Net to DMX Interface Box / Node, designed for stage and architectural lighting control programming. The system shall feature high-speed Ethernet connectivity (RJ45) supporting Art-Net and sACN protocols, equipped with panel-mounted 3-pin or 5-pin XLR female/male connectors for DMX512 universe signal distribution |
| 11 | Supply, installation, testing and commissioning of Electrical Power Cabling and DMX-512 control cabling, including laying through heavy-duty rigid PVC/GI conduits or cable trays, glanding, lugging, ferruling, XLR/terminal terminations, signal integrity testing, and complete system commissioning as per site requirements. |
| 12 | PACKAGE 1 — ILLUMINATION & ELECTRICAL WORKS | SUBWORK 2: ELECTRICAL POINT WIRING Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/ SW. |
| 13 | Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW. |
| 14 | Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW. |
| 15 | Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW |
| 16 | MODULAR SWITCHES AND ACCESSORIES Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 17 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 18 | Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 19 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 20 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 21 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 22 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 23 | WIRING, MAINS, SUB-MAINS, CONDUIT Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 24 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 25 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 26 | Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 27 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 28 | Supplying and erecting PVC box trunking of size 60x45 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX. |
| 29 | Supplying & erecting GI flexible Conduit 25 mm dia. conforming to I.S. with required number of couplings, bushes, check nuts etc. complete |
| 30 | LIGHT FITTING, FAN & ACCESSOIRES Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG FN/CF. |
| 31 | Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. |
| 32 | Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. |
| 33 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. |
| 34 | SWITCHGEAR & DB's Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 35 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 36 | Supplying, erecting & marking SPMCB 6A to 32A,C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 37 | Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO. |
| 38 | Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 39 | PANELS Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(panel enclosure) |
| 40 | Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. (cable alley) |
| 41 | Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard |
| 42 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (skeleton + M.S stand + Inside panel) |
| 43 | Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 44 | Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8) |
| 45 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. |
| 46 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 47 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 48 | Supplying & erecting of required size electrolyte copper flexible braided bus patti or bar in bus bar chamber/in panel or any other purpose, suitable for 500 volt with required capacity having thermal conductivity of 400W per meter with composition Pure copper 99.9% & Trillium 0.001 % & Current density 1.8 with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB |
| 49 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 50 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 51 | Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 52 | Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 53 | upplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 54 | Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires. |
| 55 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 56 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. |
| 57 | CABLE & CABLE TRAY & ACCESSORIES Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. |
| 58 | Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware. |
| 59 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 60 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 61 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 62 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 63 | SITC of 5 core, 2.5 sqmm Cu flexible FRLS cable confirming IS 694: 1990 with flexible bright annealed copper conductor with voltage grade 1100 Volts omplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. |
| 64 | UPS Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS |
| 65 | Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete. |
| 66 | EARTHING & ACCESSORIES Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOB |
| 67 | Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). (For copper strip of 25 x 3 weight -0.71 KG/Mtrs.) |
| 68 | Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (For GI strip of 25 x 3 weight -0.6 KG/Mtrs.) |
| 69 | Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete. |
| 70 | Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete. |
| 71 | Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes) |
| 72 | PACKAGE 2 — AUDIO SYSTEM Supply, installation, testing & Commissioning of a Biamplified, 2 Way Trapezoidal Point source arrayable (Progressive Directivity) speaker. The loudspeaker shall meet the following criteria: Usable Frequency Range (-10 dB) of 55 Hz - 18 kHz or better & Continuous Power Handling of >=1000W LF + 250W MF-HF. Low Frequency: 1 × neodymium 14-inch woofer (4-inch voice coil), High Frequency: 6 × titanium-diaphragm, neodymium compression drivers (2-inch voice coil). The Loudspeaker shall have a Max. SPL (Peak) of >=130 dB or better for LF and 135dB for HF. It should have Horizontal dispersion pattern of 100º or better. Vertical dispersion of the module shall be 10 degrees or better. The loudspeaker module shall be comprised of a of Baltic birch plywood construction and shall also have built-in 70/100V Transformer of at least 400W or better, Environmental Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24). Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 73 | Supply, installation, testing & Commissioning of a Biamplified, 2 Way Trapezoidal Point source arrayable (Progressive Directivity) speaker. The loudspeaker shall meet the following criteria: Usable Frequency Range (-10 dB) of 55 Hz - 18 kHz or better & Continuous Power Handling of >=1000W LF + 250W MF-HF. Low Frequency: 1 × neodymium 14-inch woofer (4-inch voice coil), High Frequency: 6 × titanium-diaphragm, neodymium compression drivers (2-inch voice coil). The Loudspeaker shall have a Max. SPL (Peak) of >=130 dB or better for LF and 135dB for HF. It should have Horizontal dispersion pattern of 100º or better. Vertical dispersion of the module shall be 10 degrees or better. The loudspeaker module shall be comprised of a of Baltic birch plywood construction and shall also have built-in 70/100V Transformer of at least 400W or better, Environmental Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24). Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 74 | Supply, installation, testing & Commissioning of a Biamplified, 2 Way Trapezoidal Point source arrayable (Progressive Directivity) speaker. The loudspeaker shall meet the following criteria: Usable Frequency Range (-10 dB) of 55 Hz - 18 kHz or better & Continuous Power Handling of >=1000W LF + 250W MF-HF. Low Frequency: 1 × neodymium 14-inch woofer (4-inch voice coil), High Frequency: 6 × titanium-diaphragm, neodymium compression drivers (2-inch voice coil). The Loudspeaker shall have a Max. SPL (Peak) of >=130 dB or better for LF and 134dB for HF. It should have Horizontal dispersion pattern of 100º or better. Vertical dispersion of the module shall be 20 degrees or better. The loudspeaker module shall be comprised of a of Baltic birch plywood construction and shall also have built-in 70/100V Transformer of at least 400W or better, Environmental Rated for direct-exposure outdoor installations (IP55 per EN60529; IP33C per EN54-24). Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 75 | Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 76 | Supply, installation, testing & Commissioning of OEM Coupling plate for array modules offered above. Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 77 | Supply, installation, testing & Commissioning of OEM array frame pull back hardware for extreme pitch angles. Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 78 | Supply, installation, testing & Commissioning of 18\\" subwoofer having a Freq. Range of 29Hz - 263Hz. It should have an ground stack position Sensitivity of > = 96dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=130 db. The loudspeaker should have a nominal impedance: 8ohm or more and Continuous AES Power Handling of 800W or more, Peak AES Power Handling of 3200W or more. Shall be enclosed in exterior grade Plywood. Should be IP55 Environmental rated. Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 79 | Supply , installation , testing and commissioning of digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required: The audio DSP shall have 12 analog balanced mic/line level inputs and 8 balanced output channels & 8 additional digital output channels on an RJ-45 jack. Each independently controllable . The DSP shall have Dante 64 × 64, primary/secondary, an Ethernet connection for control and programming on an RJ-45 jack, USB audio Micro-B type, stereo in/out, Audio Latency 1.05 ms (analog in to analog out) or less, DSP shall have GPIO – 5 x 5 general-purpose control, Phantom Power +48 VDC, software selectable per input, RS-232/485 ports: RS-232 (DTE) and RS-485 for control devices. DSP shall have Display 256 x 64 OLED with rotary encoder, LED Status Indicators Power/Status, Audio Signal Indication On Display. The audio DSP shall include configurable signal processing, like signal routing and mixing, equalization, filtering, dynamics, delay, room combining, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante® endpoints. It shall have following specs : Frequency Response: 18 Hz to 20 kHz, THD+N < 0.003%, Channel Separation (Crosstalk) < -105 dB, Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output. Approved Makes : Biamp / Symetrix / Bose. |
| 80 | Supply , installation , testing and commissioning of Class D configurable amplifier with PowerShare Technology a digital signal processing 4 channel power amplifier with total of 4800W power and power sharing feature for Asymmetric power allocation. Shall support Dante Digital as well as Analog line level audio inputs and GPIO connections for muting. Power output: Upto 4x1200W @ 4–8 Ω, 70 V, 100 V , upto 4x1500W @ 2ohms, SNR: 110dB(A) or better, THD+N: <0.1 %, Crosstalk (1 kHz): -70dB or better, A/D and D/A converters: 24-bit, 48 kHz Sample rate converter: 24-bit, 44.1 kHz – 192 kHz, Latency 2.5 ms fixed-latency architecture, Input-to-output signal routing: 4 × 4 matrix signal processing: Matrix mixer, 5-band PEQ, array EQ, band pass, Spkr EQ, limiter, delays, Programmable speaker EQs, Input impedance : 20 kΩ Status indicators: metering LEDs, system status LEDs, power status LEDs Protections: Thermal, excess high/low AC mains voltage, DC, high‑frequency, output short‑circuit, inrush current, clip, peak, etc. Cooling system: variable-speed fan, front-to-back airflow. Approved Makes: L-Acoustics / Bose / D&B Audiotechnik. |
| 81 | Supply, Installation, Testing, and Commissioning (SITC) of 2.5mm2 Speaker Cables involves supplying high-purity, oxygen-free copper (OFC) stranded cables with low-smoke zero-halogen (LSZH) or UV resistant outdoor jacketing. Installation covers systematic cable pulling through dedicated conduits or cable trays, maintaining safe separation from AC power lines, and precise termination using heavy duty speaker connectors or crimp lugs. Rigorous testing includes conductor continuity checks, loop resistance verification, insulation testing (Megger), and impedance matching under full audio load. Commissioning concludes with phase/polarity verification (in-phase speaker testing), channel labeling (Left/Right/Zones), cable path tagging, and audio signal clarity checks to ensure lossless power transfer and clear sound reproduction. |
| 82 | Supply, Installation, Testing, and Commissioning (SITC) of 4mm2 Subwoofer Cables involves supplying high-current, low-resistance oxygen-free copper (OFC) stranded cables with tough, flexible LSZH or weather-resistant jacketing to prevent low-frequency voltage drop. Installation covers pulling heavy gauge cables through dedicated conduits or cable trays, ensuring strict separation from power lines to eliminate low-frequency hum, and terminating with heavy-duty connectors. Rigorous testing includes DC loop resistance measurements, insulation testing, continuous high-power bass burst load checks, and mechanical stress verification at connection points. Commissioning concludes with phase/polarity alignment, channel tagging, acoustic dampening checks, and distortion-free sub bass performance testing to ensure maximum punch and lossless low-frequency signal delivery. |
| 83 | CONTENT DEVELOPMENT Artistic direction aur creative concept planning; secondary aur primary reference data collection; historical/thematic accuracy verification; 10-minute full dome narrative structure drafting; cinematic screenplay creation aur dramatized dialogue writing specifically tailored for high-impact celebrity voice delivery; multilingual script translation (Hindi/English/Regional) with phonetics alignment aur client consultation based revisions. |
| 84 | Fulldome 360-degree fisheye grid storyboard preparation; scene-by-scene visual narrative planning; visual treatment design aur concept mood boards development; custom artistic components, physical miniature/art props styling, digital asset styling, aur client observations ke hisab se pre-production approvals |
| 85 | Arrangement, licensing, and professional artist remuneration for renowned celebrity voice-over artists (Amitabh Bachchan, Shreyas Talpade, Nana Patekar); multi-track acoustic dubbing sessions; dynamic emotional delivery supervision; custom background score and cinematic orchestral composition; multi-layered Foley sound effects (SFX); immersive multi-channel (5.1 / 7.1 / 3D spatial dome acoustics) master sound mixing and mastering. |
| 86 | Live-action video shooting sessions at designated sets/locations; 4K/6K cinema-grade camera setup, lighting, and crew mobilization; green screen/chroma filming, live art component captures, costume/character coordination, and uncompressed RAW footage post-processing for dome canvas mapping. |
| 87 | Production of customized 2D character animation, motion graphics, graphic asset transitions, and visual maps; frame-by-frame lip-sync coordination matching recorded celebrity dialogues; visual effects (VFX) particle creation; dynamic motion flow optimized for spherical dome immersion without motion sickness (10 mins duration). |
| 88 | High-resolution dome master rendering (4K/8K fulldome format); 360-degree fisheye perspective correction; multi-projector geometric warping, edge-blending slice creation, pixel-level color balancing, and digital gamma optimization tailored to the dome projection geometry |
| 89 | Deployment and ingestion of rendered content onto on-site multi-channel media servers; automated timeline timecode sync programming (video, multi-channel audio, DMX show control, lighting cues, and special effects); client review demonstrations, on-site fine-tuning, observation changes implementation, and final show commissioning. |
| 90 | Supply of Display media server with 4nos x HD outputs as required , synced together. It should be capable of capturing content. Original windows 10 embedded with min Intel i9 CPU with Rugged cooling system. min16GB RAM, 512 nVME SSD drive for media playback. Should also have Ethernet in/out. to complete the job with all respects. Min. 1x NVidia GPU RTX A4000 or better |
| 91 | Supply of Production PC having Original windows 10 embedded with Intel i7 or better CPU with Rugged cooling system. with 16GB RAM, 512 nVME SSD drive for media playback. Should also have Art-net Ethernet in/out. to complete the job with all respects, to be supplied with Monitor |
| 92 | INSTALLATION EQUIPMENT Supply, installation, testing & Commissioning of 12-port Gigabit Ethernet fully-managed switch. Should have 8x1G PoE+ 125W budget, 2x1G and 2xSFP Ports. Approved Makes : Cisco / Netgear / D-link. |
| 93 | Supply, installation, testing & Commissioning of 300m Fibre Optic HDMI 4K60 Dongle Extender. Should be able to Extend HDMI signals up to 300m over a single simplex LC OM3 or OM4 multi-mode fibre optic cable. Support for visually lossless resolutions up to 4K Ultra HD 3840x2160@60Hz 4:4:4 with HDR, HLG and Dolby Vision. Audio support for Dolby Atmos, Dolby TrueHD and DTS-X. Compact self-powered dongle design with Professional aluminium construction. Approved Makes : Liberty AV / Lindy / Extron. |
| 94 | Supply, installation, testing & Commissioning of armoured fiber high-performance bulk OM4 multimode fiber optic cable. 50/125 µm multimode core protected by an Aluminum Interlock Armor (AIA) or Corrugated Steel Tape (CST) or equivalent. Approved Makes: Liberty AV / Belden / Krystal. |
| 95 | Supply, installation, testing & Commissioning of Power Distribution Panel (PDP). High-reliability, permanent-installation-grade optimized for heavy-duty laser projectors and media servers used in complex projection mapping applications. The Panel must be wall mounted, Fully wired, compartmentalized, dust and vermin proof. The enclosure must be fabricated from high-quality Cold Rolled Close Annealed (CRCA) steel, minimum 2.0 mm thickness and Powder coated. Removable gland plates at the bottom/top must be provided for proper cable entry. Also sufficient louvers must be provided for ventilation.Appropriate Busbar and earthing must be ensured. All necessary Incomer ad Protection components like MCCB, SPD , ELCB/RCCB, & Individual Isolation MCB's for all projectors and the backend system components must be provisioned in the Panel. Approved Makes: Custom. |
| 96 | Supply, installation, testing & Commissioning of HDMI Patch cables, LAN Patch Cables, Connectors, etc. |
| 97 | Supply, installation, testing & Commissioning of Equipment Rack 36U complete with all accessories like castors, Shelves, Fans, cable management system, PDU's. Approved Makes: Valrack / Rittal / Middle Atlantic |
| 98 | Supply, installation, testing & Commissioning of online UPS of 45 KVA capacity with minimum backup time of 20 minutes. The UPS system must be supplied with Industrial grade Lithium-Ion Batteries, complete with all accessories and installation. Approved Makes: Reputed. |
| 99 | Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 50 mm height complete with necessary coupler plates & hardware. |
| 100 | Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 100 mm width & 50 mm height complete with necessary coupler plates & hardware. |
| 101 | Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm x 200 mm complete with necessary cover plates & hardware. |
| 102 | Installation, Testing, and Commissioning (SITC) for AV and Audio Equipment Integration involves deploying core control processors, digital signal processors (DSP), video processors, and projection mapping software. Installation covers routing signal pathways, interfacing control networks, calibrating multi-projector blend zones, and configuring audio routing protocols (Dante/AVB). Rigorous testing includes 3D spatial alignment, edge blending geometry checks, warp matrix verification, audio pink-noise speaker tuning, and latency synchronization. Commissioning concludes with custom GUI interface programming for touch controllers, multi preset scene creation, failover automation setups, complete system source-to-display signal flow documentation, and comprehensiveend-user operational training todeliver a seamless, fully automated audiovisual experience. |
| 103 | Supply, Installation, Testing, and Commissioning (SITC) of Electric Cables and Other Accessories involves supplying FLLS (Flame Retardant Low Smoke) copper/aluminum power cables, shielded signal interconnects, heavy-duty GI cable trays, conduits, and IP67 weather sealed junction boxes. Installation covers systematic tray laying, underground/aerial conduit routing, secure cable clamping, precise glanding, and lug crimping with ferrules. Rigorous testing includes insulation resistance (Megger) checks, high-voltage withstand testing, conductor continuity, phase identification, and thermal scanning under full load. Commissioning concludes with circuit-by circuit load balancing, single-line diagram (SLD) tag cross-referencing, as-built routing documentation, and safety grounding verification for complete operational reliability. |
| 104 | PACKAGE 3 — PROJECTION MAPPING SITC of DLP laser projector having, min 23700 Lumens , WUXGA output Resolution, Illumination Life : 50000 hours. Contrast Ratio 4000000:1,Inputs:DP1.2, HDMI2.0, 12SG-SDI,HDbaseT ,HDBaseT,Pixel clock 600MHz, |
| 105 | Supply of weatherised enclosure for equipment. Equipment should be complete with AC and temperature sensors. |
| 106 | Supply, installation, testing & Comissioning of 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Dome alignment software should also be included Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender