Tender For Registration Of Contractors And Rate Fixing For D.T.H.Borewell Drilling Of 150 Mm Dia.For Borewell Programme In Zilla Parishad, Satara
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2026
3 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satara → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Registration Of Contractors And Rate Fixing For D.T.H.Borewell Drilling Of 150 Mm Dia.For Borewell Programme In Zilla Parishad, Satara
BOQ
| Sl. No. | Item Description |
| 1 | Borewell drilling work (including transport) - Borewell drilling of 200/215 mm dia.in soil/murum strata and drilling of 150 mm dia.in hard rock (wet drilling) |
| 2 | For 150 mm Bore well Yield testing of borewell by flushing (Air lift method & using 90 degree V notch) after completion of borewell |
| 3 | Rotary drilling work and related work rate of 150 m diameter tube coop - Drilling |
| 4 | Transportation |
| 5 | Gravel Packing |
| 6 | Development |
| 7 | Bel plug |
| 8 | Mango sticks (1 m long x 0.150 m Wide x 0.200 m thickness) |
| 9 | MS Clamps (1 m long x 0.100 m Wide x 0.100 m thickness) |
| 10 | 115 mm I diameter drilling work rate (Surface Bore/Probe Bore/Inwell Bore/recharge shaft, Jacket well, BBT,FSC,SBT etc) - Borewell drilling work (including transport) - Borewell drilling of 150 mm dia.in soil/murum strata and drilling of 115 mm dia.in hard rock (wet drilling) |
| 11 | For 115 mm Bore well Yield testing of borewell by flushing (Air lift method & using 90 degree V notch) after completion of borewell |
| 12 | Benning and withdrawing of wells in wells and waste work-time cutting ware for removal of material wells |
| 13 | Bactericom and other materials are installed on the machine and then re-engineered after completion of the fuel work. Also, to optimize the site for the uninterrupted power generation activities. Site preparation and biennor wages every move to move the waste well |
| 14 | Perforation of bore holes for bore blasting after blasting for safety reasons (This rate will only apply for drilling holes drilled internally) |
| 15 | Supply and erection of 150 mm Ductile iron casing pipe of diameter, m. S. ER W, Medium Class (IS; 1239) 4.80 mm. Thickness (with socket) |
| 16 | Supply and erection of 150 mm Ductile iron casing pipe of diameter, 4.80 mm. Thickness lowering and rates of grouting |
| 17 | Supply and erection of 150 mm Cap for diameter ductile iron casing pipe (IS : 1239) |
| 18 | Supply and erection of 150 mm diameter bean flour iron casing pipe, M.S.E.R.W. Mandiam Class (IS : 1239). 4.80 mm thickness |
| 19 | Supply and erection of 150 mm Vyasa M. S. E.R.W., Medium Class Iron Casing Pipe (Grid) (I:S 1239) |
| 20 | Supply and erection of 150 mm Diameter bean flour and mesh iron casing pipe, including lowering and welding work.(10% of Basic Cost) |
| 21 | Supply and erection of 125 mm Diameter Ductile Iron Casing Pipe, MS, E.R.W. Medium class (IS: 1239) (with socket.) 4.80 mm. Thickness (with socket) |
| 22 | Supply and erection of 125 mm Diameter Iron Lowering and Grouting Rates on Basis Cost.) 4.80 mm. Thickness (10% of Basic Cost) |
| 23 | 125 mm Cap for diameter ductile iron casing pipe (IS : 1239) |
| 24 | Supply and erection of 150 mm Vyas D.T.H. 180 mm for weaving. diameter 6 kg/em2 PVC casing pipe (IS 4985-1988) |
| 25 | 150 mm with the technical approval of the Deputy Engineer and Geologist in exceptional circumstances / where the ground level is rocky and if more than 40 feet KSIG pipe is essential. Vyas D.T.H. 180 mm for weaving. Dia 8kg/cm2) PVC Casing Pipe (IS 4985-1988) Rate |
| 26 | 150 mm. Vyas D.T.H. 180 mm for knitting. Diameter 6kg/cm2 8kr/cm 2 PVC Casing Pipe Casing Lowering Handling & Grouting Rate up to 12 m |
| 27 | For casing above 12 m) |
| 28 | 180 mm Cap for diameter PVC pipe |
| 29 | 115 mm 140 mm for hole/hole of dia. 4 kg / cm 2 diameter PVC casing pipe IS 4985-1988. |
| 30 | 115 mm 140 mm for hole/hole of dia. 6 kg / cm 2 diameter PVC casing pipe IS 4985-1988. |
| 31 | 140 mm Rates of PVC casing pipe lowering and grouting of diameter 4 kg/cm2 (Basic Cost 10%) of |
| 32 | 140 mm Rates of PVC casing pipe lowering and grouting of diameter 6 kg/cm2 (Basic Cost 10%) of |
| 33 | Cap for 140mm diameter PVC pipe |
| 34 | to be used for recharge shaft.p. V.C. Casing pipe to describe mesh where appropriate |
| 35 | Special water chamber rate specially developed for dual pump installation work (galvanized) |
| 36 | Stainless steel bottom nipple required for dual pump installation work |
| 37 | Capacity testing of bore wells with electric pumps Rate per bore well with power generator |
| 38 | Performing dewatering works of bore wells Flushing Special repair of bore wells, Capacity testing etc for this. Hand pump removal and installation |
| 39 | Rateing / re-drilling / flushing of bore wells of 150/115 m diameter with transport rate (per bore well) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender