Tender For Construction Of Head Works, Distribution System And Power Supply Including Energisation Of Dharuapada-Iii L.I. Project Under Patna Block In Kendujhar District Out Of Ridf Grant
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
8 days left
EMD
44005
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Head Works, Distribution System And Power Supply Including Energisation Of Dharuapada-Iii L.I. Project Under Patna Block In Kendujhar District Out Of Ridf Grant
BOQ
| Sl. No. | Item Description |
| 1 | Dharuapada-III LIP |
| 2 | Earth work excavation in foundation & plinth in hard soil within 50 mtr. Initial lead and 1.5Mtr initial lift including dressing and leveling the bed & depositing the soil with initial lead & lift as per direction of engineer-in-charge |
| 3 | Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%) |
| 4 | Filling in foundation and plinth with sand watered and rammed |
| 5 | Cement concrete (1:4:8) with 4cm size HG crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. |
| 6 | Cement concrete(1:2:4) with 12mm size black HG crusher broken chips of approved quality from approved quarry as per the direction of the Engineer-in-charge. |
| 7 | Cement concrete(1:2:4) with 12mm size black HG crusher broken chips of approved quality from approved quarry for RCCwork including hoisting & laying with ramming watering and curring etc. Complete including cost,taxes, royalty conveyance charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-in-charge. |
| 8 | Brick work with Fly Ash brick in cement mortar (1:6) in F&P. |
| 9 | Brick work with Fly Ash brick in cement mortar (1:6) in Superstructure |
| 10 | 12 mm thick cement plastering in cm (1:6) in F & P over brick work. |
| 11 | Cement punning over plastering |
| 12 | Supplying,fitting,placing uncoated HY. Sd. Bars reinforcement etc. complete for RCC work including cutting bending,binding tying the grills, placing in position including cost of binding wire. |
| 13 | Rigid & smooth centering and shuttering for Column, Roof beam and Roof slab including cost carriage of all materials |
| 14 | Rigid & smooth centering and shuttering for Lintel and Chajja including cost carriage of all materials |
| 15 | 2.5 cm thick grading concrete (1:2:2) on roof slab |
| 16 | Distempering two coats to wall with distemper |
| 17 | Finishing wall with water proofing Cement Paint of approved quality |
| 18 | Painting of red oxide primer for priming over iron work including cost of red oxide and labour etc. |
| 19 | Painting two coats with any approved paint for priming over iron work including cost of paint and labour etc. |
| 20 | Filling F & P with excavated materials, moorum including watering and ramming |
| 21 | Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40% i.e. of respective item No. 2 above) |
| 22 | Laying and fitting of 200 mm dia HDPE Pipe |
| 23 | Laying and fitting of 160 mm dia HDPE Pipe |
| 24 | Cost of Iron door (size 1.0x1.52 M) 1 no. and cost of Iron ventilator (size 0.45x0.30 M) 2 nos. |
| 25 | Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete but excluding the cost of GST. 200mm Ø HDPE Pipe PE 80-PN 4 |
| 26 | Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre & post inspection, Cess etc complete but excluding the cost of GST. 160mm Ø HDPE Pipe PE 80-PN 4 |
| 27 | 100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark. (As per S/R 2022) |
| 28 | 150 mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark. (As per S/R 2022) |
| 29 | Cost of 100 mm dia G.I.Bend IS No. 1239 ( Part-II/1992) |
| 30 | Cost of 100 mm dia G.I.flange IS No. 6392/1971 |
| 31 | Cost of 150 mm dia G.I.flange IS No. 6392/1971 |
| 32 | Cost of 100 mm dia G.I. Socket |
| 33 | Cost of supplying of 160mm x160mm x 100mm dia weldless G.I. Tee (3.6 mm thichness) with bend closing and opening arrangement of reputed brand including all cost, conveyance, cess etc. complete with accessories. |
| 34 | 200mm x200mm x 160mm dia. Spigot moulded reducing HDPE Tee 10 Kg |
| 35 | 160mm x160mm x 160mm dia. HDPE Tee spigot desing 6 Kg |
| 36 | Cost of 100x100x25 mm G.I.Tee with plug for priming |
| 37 | 200mmx150 mm MS Reducer |
| 38 | 150mmx100 mm GI Reducer |
| 39 | 160 MM HDPE Tail piece 160 mm long |
| 40 | 160 mm MS blind flange |
| 41 | 200mm dia. HDPE End Cap. |
| 42 | 160mm dia. HDPE End Cap. |
| 43 | Cost of 300 mm RCC Hume Pipe (NP-3) as per specification including laying and fitting |
| 44 | 100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022) |
| 45 | 100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022) |
| 46 | Cost, supplying of 50mm dia Kirloskar make C.I single Air Release Valve PN 1.6 with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark including all cost, conveyance, cess etc complete but excluding cost of GST |
| 47 | 100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete but excluding cost of GST |
| 48 | 150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022) |
| 49 | Cost of Rubber Insertion |
| 50 | Cost of Nut Bolt |
| 51 | 15HP/11.25 KW Energy efficiency Monoblock pump set of total head 24 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification(a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST |
| 52 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST |
| 53 | 4 KVAR Power stunt capacitor with ISI mark of reputed approved brand including all cost but excluding cost of GST |
| 54 | 3x16 sqmm PVC inuslated (heavy duty) armoured Aluminium Tropader Cable confirming to IS-1154 Part-I/1988 including laying below 0.60 mtr. of the ground and filling the excavated materials including watering and ramming . |
| 55 | Motor hood cover of 18 gauge C.R. sheet with double coat painting over one coat primer, so as to cover the motor. |
| 56 | Base plate for moter and pannel with ms angle as per direction of Engineer in charge. |
| 57 | Cost of cutting, threading, shifting of GI Pipe as per site requirement |
| 58 | Labour charges for transportation and installation of Pumpset with cost of electrical petty materials on Fixed Foundation and fitting in Suction with bend flanges including fitting of all delivery mains upto Rising main etc. complete. |
| 59 | Cost of painting & writting over display board including cost of materials |
| 60 | Supply of small T&P kit comprising of hand gloves-1 pair,tester-1 no, 8 inch cutting plier -1 no, 12 inch sly wrench-1 no, 12 inchScrew driver-1 no. , 24/27 & 21/23 De spanner-2 nos., 24/27 & 21/23 Ring spanner- 2 Nos. (Taparia) |
| 61 | Electrical earthing with 40mm dia medium duty G.I. earthing pipe (of each 3m)with earthing installation including cost of all materials such as No 6 GI wire,G.I.flange, charcoal, salt, souldering lead etc. including transportation as required as per direction of engineer-in-charge. |
| 62 | Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956, with 330 Kg., 10 mtr. Long PSC pole support in 50 mtr. Span, 55 sqmm All Aluminium Alloy Conductor(AAAC) - XLPE Insulated/Covered with double disc arrangement, 11 KV “V” Cross-Arm with required nos. of 11 KV B & S disc insulators and 11 KV Pin Insulators coping and padding of poles, danger board at each pole, anticlimbing device and rubbing (spike) stay set at each bending point and double stay at end point with 18mm GI HT stay rod & concreting of stay with anchor plate etc, including cost of materials, labour, transportation, inspection and commissioning etc, complete including painting in navy blue colour band with inscription of OLIC in each pole as per latest DISCOM-TPNODL Standard Guidilines. |
| 63 | Construction & erection of 11/0.416 25KVA, D.P.mounted Sub-Stations of different capacity confirming to RE Rules,1956 mounted on 2.44 Mtr. Long structure, supported in 330 Kg. 10 Mtr. Long PSC pole, transformer hard channel & top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) & A.B.Switches(F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box , Pipe earthing(F-2), including cost of 50 sqmm 3.5 Core PVC cable carping & padding of Poles, Danger board at each Pole, Anti Climbing Devices & all other necessary fittings i.e. required size Nuts & Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including parapet wall fencing.25 KVA - BEE 1 Star rating with BIS Level-II |
| 64 | Cost of supply and erection of G.I. fencing with gate as per TPNODL standard guidelines |
| 65 | 11KV Line 180 degree Cut Point Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender