Tender For Construction Of Middle School At Jhabri , G.P-Simaldhab , Block- Barhait , Dist-Sahibganj
Tender Value
22.58 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
1 days left
EMD
45000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sahebganj → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Middle School At Jhabri , G.P-Simaldhab , Block- Barhait , Dist-Sahibganj
BOQ
| Sl. No. | Item Description |
| 1 | SITE CLERANCE |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mmnominal size |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mmnominal size |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mmnominal size |
| 9 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 11 | Providing designation 75 b brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 16 | Providing and laying APP (Atactic Polypropylene Polymer) modied prefabricated ve layer 3 mm thick water proong membrane, black nished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold exibility shall be upto -2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 17 | Providing Precast R.C.C M-200 with nominal mix of (1:2:4) lab of desired size with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 10 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete as per building specification & direction of E/I (5.3.30.) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral staircases |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 23 | Providing 12 mm thick water proof cement plaster (1:3)withclean coarse sandofF.M.1.5with5%cicooranyother approved water proofing compound includingscreening,curingwithall leads and liftsofwater, scaffolding taxesand royalty all complete as per building specification and direction of E/I |
| 24 | Providingand fixing fanhookof16mm diaM.S.bar1metrelongbenttorequired size and shape, placed inpositionand fixed inR.C.C. slabbeamat the timeof casting all complete as per building specification and direction of E/I |
| 25 | Providing Tor steel reinforcement of 8mm. dia. rodsasperapproveddesign anddrawingexcluding carriageofM.S. bars toworksite , cutting, bendingand bindingwithannealedwirewithcostof wire, removalofrustplacingtherodsin position all complete as per building specificationanddirectionofE/l.TMTFe 500(a) 8 mm dia. |
| 26 | Supplying, fitting & fixing M.S.GRILL made of 20x6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finishing smooth, hoisting as per building specification and direction of E/ |
| 27 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I |
| 28 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 29 | Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 30 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 32 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 34 | Providing and laying 6mm. precast white glazed tiles in walls over 12mm. cement mortar (1 :3) and iointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royaity all complete as per building specification and direction and of E/1 |
| 35 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth |
| 37 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 38 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 39 | Add carriage cost of Materials i) Cement + Steel lead 10 km |
| 40 | ii) Sand lead 30 km |
| 41 | iii) Chips lead 25 km |
| 42 | iv) Bricks lead 75 km |
| 43 | Wring for light point/exhaust fan point /call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitale GI box etc as requried Group A |
| 44 | Twin control Point in PVC conduit, with piano type switch:- Wring for twin control point with 1.5 aq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, 2 way piano type switch, phenolic laminated sheet with sutible size PVC/MS box etc as requried |
| 45 | Power plug wring in PVC conduit (2x4sqr. Mm) :- wring for Light/power plug with (2x4 sqr. Mm FR PVC insulted cpper conductor single core in surface/recessed PVC conduit, along with 1 no. 4 sq. mm FR PVC insulated copper conductor single core for loop earthing etc as required. |
| 46 | Circuit /submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC in insulted cpper conductor single core in surface/ recessed PVC conduit as required (2x 1.5 sq. mm + 1x1.5 sq. mm) |
| 47 | (2x 2.5 sq. mm + 1x2.5 sq. mm) |
| 48 | S/F light plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps mdular socket outlet and 5/6 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building ) |
| 49 | S/F Power plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building ) |
| 50 | Supplying and fixing of folowing size of PVC conduit of PVC conduit along with accessores in surface/ recess including citting the wall and making good the same in case of recessed conduit as requied. 20 mm |
| 51 | Supplying and fixing of folowing modular switch / scoket on the existing mdular lpate & switch box including connections but excluding modlar plate etc. as required. 5/6 amps, one way switch |
| 52 | 5/6 amps, 3 pin socket outlet |
| 53 | 15/16 amps, 6 pin socket outlet |
| 54 | Supplying and fixing of folowingsize/ modules, GI box along with modular base & coverplate for modular switches in recess etc as required 1 or 2 module(78mm x 78mm x 45mm) |
| 55 | supplying and fixing Batte / Angle holder including connection etc as required |
| 56 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 cvolts on surface / recess, complete with tinned copper bus bar, neutral bus bar din bar, inter connections, powder painted including earthing etc. as requred ( but without MCB/TCCB/Isolator) 4 Way single door |
| 57 | Supplying and fixing 6 amps to 32 amps rating 240 volts, 10 KA, \\"B\\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, esting and commissioning etc as required 6/32 amps,single pole \\"B\\" series |
| 58 | Supplying and fixing following rating four pole 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 59 | providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor complete as required ( for horizontal run) |
| 60 | Supplying and fitting and fixing 9/10 watt LED Bulb |
| 61 | Supplying and fitting and fixing 60 Watt LED Street light |
| 62 | Supplying fitting moduler type electronic fan regulator |
| 63 | Supply and fixing 1200mm BLDC 5 star rating 32W Ceiling Fan |
| 64 | Add cost of S/B and photography |
| 65 | Add . 18 % GST |
| 66 | add 1 % labour cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender