Tender For For Renovation Of Community Building At Ward No 15 To Develop As Urban Ayushman Arogya Mandir Under Nagar Panchayat Hussainabad
Tender Value
18.81 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
37700
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palamu → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Renovation Of Community Building At Ward No 15 To Develop As Urban Ayushman Arogya Mandir Under Nagar Panchayat Hussainabad
BOQ
| Sl. No. | Item Description |
| 1 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. ( 5.8.9 ) |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. ( 5.10.7 ) |
| 3 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. ( 5.7.6 ) |
| 4 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.3 ) |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( DSR 13.80) |
| 6 | Providing two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I. ( 5.8.17 ) |
| 7 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge. ( DSR 22.24A ) |
| 8 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. ( 5.8.45) |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. do........do ........all complete job as per E/I (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) wt. @ .75 kg / sft (DSR 21.1.1.2 ) |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) ( DSR 21.3.1 ) |
| 11 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. ( DSR 21.2.1 ) |
| 12 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading ( DSR, 9.7.8) |
| 13 | Supplying fitting and fixing glass panes including supplying putty. Beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I. (5.4.57 ) |
| 14 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. ( 5.5.29 ) |
| 15 | Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) ( 5.8.41 ) |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) ( 5.3.1.1) |
| 17 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with Integral water proofing compound Liquid @125 ml per bag cement including screening, curing ( 5.12.5 ) |
| 18 | Construction of granular sub base by providing close graded material mixing in a mechanical mix plant at OMC ,carriage of mix material to work site ,spreading in uniform layers with motor grader on prepared suface and compacting with vibratory power roller to achieve the desire density ,complete as per clouse 401. (JH-RCD_2022_ 401 A (iii)) |
| 19 | Providing and laying 60mm thk factory made cement concrete interlocking paver block of M35 Grade made by block making machine withj strong vibratory compaction of approved size,design and shape laid in required color and pattern over bed as per relevant IRC code ,filling the joint with fine sand etc all complete as per direction of Engineer-in-Charge.60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. ( RCD_4.23A ) |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) ( 5.3.1.2 ) |
| 21 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With \\"A\\" grade white 15X15cm Tiles. (5.6.23.1) |
| 22 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. (DSR, 11.39) |
| 23 | Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curring, taxes and royalty all complete as per building specification and direction of E/I. ( 5.6.18) |
| 24 | Providing and laying 25mm thick white makrana marble stone slab flooring of approved quality over 19mm thick base of lime mortar (1:1:1) (Lime putty: surkhi: coarse sand) laid and joined with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. ( 5.6.21) |
| 25 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead (DSR, 15.25 ) |
| 26 | Supplying, Fitting and Fixing following items of approved quality……..do…… all cmplete job. ( supply 42 P(17) )(d) pillar cock ( 3.1.11 ) |
| 27 | (e) Towel ring ( 3.1.21 c ) |
| 28 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: ( DSR 18.49 ) 15 mm nominal bore. ( 18.49.1) |
| 29 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. ( DSR, 18.52.1 ) |
| 30 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (DSR 17.31.2 ) |
| 31 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. ( DSR 15.52 ) |
| 32 | Dismantling of I.W.C./E.W.C. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. ( P(93)/1) |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ( DSR,17.3.1 ) |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer ( DSR 17.7A ) |
| 35 | Providing and fixing Gun metal full way valve o f approved quality all complete as per specification and direction of E/I 32 mm dia ( 3.1.12 (D) ) |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR,16.49) |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall (D.S.R 18.7)(a) 15 mm dia pipe ( 18.7.1) |
| 38 | (B) 20 mm dia pipe (18.7.2 ) |
| 39 | Providing and fixing PVC Pipe & all fittings …do….. complete,as per direction of E/I (a) 100 mm dia PVC Pipe ( DSR 12.41.2 ) |
| 40 | (b) 75 mm dia PVC Pipe (12.41.1 ) |
| 41 | (c) PVC Pipe Clips 75 mm dia ( 12.43.1 ) |
| 42 | (d) PVC Pipe Clips 110 mm dia ( 12.43.2 ) |
| 43 | (e) PVC Pipe Shoe 110 mm dia ( 12.42.6.2 ) |
| 44 | (f) 75 mm Bend ( 12.42.5.1 ) |
| 45 | (g) 110 mm Bend ( 12.42.5.2 ) |
| 46 | (i) Single TEE Door 75 mm dia ( 12.42.3.1) |
| 47 | 110 mm dia ( 12.42.3.2 ) |
| 48 | Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l. ( 5.10.33) |
| 49 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.( Plinth protection, drainage corner) ( 5.3.8 ) |
| 50 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. Rising of Terrace Parapet ( 5.2.14 ) |
| 51 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. parapet both side + top (5.7.3 ) |
| 52 | Carriage of materials- (a) Sand lead 16 km - |
| 53 | (b) Chips lead 8 km - |
| 54 | (c) Bricks [ Lead 8 km(1K+7P) ] |
| 55 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required.Group C ( JSR-1.3.3 ) |
| 56 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. ( JSR-1.5 ) |
| 57 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required (JSR-1.7) (i) 2x1.5 sq mm + 1x1.5 sq mm earth wire ( 1.7.1 ) |
| 58 | 2x2.5 sq mm + 1x2.5 sq mm earth wire ( 1.7.2 ) |
| 59 | 4x2.5 sq mm + 2x2.5 sq mm earth wire ( 1.7.8 ) |
| 60 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(JSR-1.21) 20mm dia ( 1.21.1 ) |
| 61 | 25mm dia ( 1.21.2 ) |
| 62 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(JSR-1.24) (i) 5/6 amps one way switch ( 1.24.1 ) |
| 63 | 15/16 amp one way switch ( 1.24.3 ) |
| 64 | 5/6 amp 3 pin socket outlet ( 1.24.4 ) |
| 65 | 5/16 amp 6 pin socket outlet ( 1.24.5 ) |
| 66 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (JSR-1.25) |
| 67 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.(JSR-1.27) (i) 1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet. ( 1.27.1 ) |
| 68 | 4/5 Module (78mm x140mm x 50mm) ( 1.27.2 ) |
| 69 | 6 Module (78mmX205mmx50mm) ( 1.27.3) |
| 70 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. ( 47/ 1.31 ) |
| 71 | Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/ wooden block including connection etc as required. ( JSR-1.33 ) |
| 72 | Supplying and fixing brass batten/ angle holder including connection etc. as required. (JSR-1.34) |
| 73 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required. ( JSR-1.44) |
| 74 | Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (JSR-2.9) 8 Way (4+24), Double Door Horizontal Type (2.9.6 ) |
| 75 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required. (JSR-2.12) 40 Amp TPN ( 2.12.9 ) |
| 76 | Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required.(JSR-2.16) 40 Amps (2.16.2) |
| 77 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke andsalt) as required. (JSR-3.4) |
| 78 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required (JSR-3.15) |
| 79 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.(JSR-3.18) |
| 80 | Bulk Head fitting with 9/10Watt LED. (JSR-M 869) |
| 81 | S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as per E/I (JSR-9.5) 20/22 W LED Tube Light (JSR-9.5.2) |
| 82 | SITC of 300 mm (12\\") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required. Make :-Usha/Crompton / Havells . (M-775) |
| 83 | Supply, Installation, Testing and Commissioning of following size fan 3 Blades confirming to IS:374:2019 including wiring the down rods of stranded for 230 V 50 Hz, single phase supply etc. complete as required (JSR-9.4) 1200 mm ( 48\\") Ceiling Fan (JSR-9.4.1) |
| 84 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. Basic Rates ( DWSD_SOR_2026_M1035 + OHC & CP 14.95%) From 0 - 50 meter |
| 85 | From 51 - 125 meter |
| 86 | Supply of 200mm dia X 2.00m long UPVC casing pipe conferming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carriage. (DWSD_SOR_2026_M1048 + OHC & CP 14.95%) |
| 87 | Supplying all materials, labours, equipments for lowering blue UPVC casing pipes as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site.(DWSD_SOR_2026_M1041 + OHC & CP 14.95%) |
| 88 | Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I. (DWSD_SOR_2026_M1042 + OHC & CP 14.95%) |
| 89 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/ Noryl Impeller) up to 20 stages (DWSD_SOR_2026_M1055 + OHC & CP 14.95%) 2 HP |
| 90 | PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable with aluminium conductor for working voltage up to and including 1100 volts.(Conforming to IS:1554, part-1) 6sq.mm, 2 core. (ED_SOR_2026_M736 + OHC & CP 14.95%) |
| 91 | 63 amp. Four pole, on load change over switch in sheet enclousre with side handle operation. (ED_SOR_2026_M303 + OHC & CP 14.95%) |
| 92 | Medium density polyethylene pipe (MDPE pipe) in standard length with necessary Jointing material like mechanical connector i.e., thread/insert joint / quick release coupler joint / compression fitting joint or flanged joints confirming to ISO: 4427 : 1996 MDPE pipe of material grade PE-80 PN16 (dia in mm) 40 mm dia (DWSD_SOR_2026_M1887 + OHC & CP 14.95%) |
| 93 | G.S.T 18% |
| 94 | L.C 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender