Tender For Design, Build, Operate & Transfer (Dbot) Procurement, Installation And Commissioning Of 18 Kld Faecal Sludge / Septage Treatment Plant With Any Suitable Technology And All Appurtenat Structures And Allied Works; (Ii) Gis Based Survey And T
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
20 days left
EMD
15.26 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rudra Prayag → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Build, Operate & Transfer (Dbot) Procurement, Installation And Commissioning Of 18 Kld Faecal Sludge / Septage Treatment Plant With Any Suitable Technology And All Appurtenat Structures And Allied Works; (Ii) Gis Based Survey And Tagging Of House Hold & Gis Application For Mapping And Installation Of Septage Monitoring It Cell Including All Necessary Equipments Etc Complete. (Iii) Truck Mounted Sewer Suction Cum Jetting Machine, Supply, Installation, Testing And Commissioning Of Truck Mounted Sewer Suction Cum Jetting Machine Total Tank Capacity 3000 Ltrs (Each). (Iv) Operation And Maintenance Of The (I), (Ii), & (Iii) Complete Works, For A Period Of Five Years In Gauchar, Chamoli, State Of Uttarakhand, India On Dbot Basis. Under Sbm 2.0
BOQ
| Sl. No. | Item Description |
| 1 | PROCESS DESIGN ENGINEERING AND DRAWINGS |
| 2 | PROCESS DESIGN ENGINEERING AND DRAWINGS :- Process &Instrumentation Diagramsdetailed engineering, preparation, submission, approval and finalization of all drawings, design calculations, technical documents and manuals required for the complete execution, testing, commissioning and operation of the project, including Process Flow Diagrams (PFDs), Process & Instrumentation Diagrams (P&IDs), flow charts, hydraulic diagrams, hydraulic profiles and process calculations; Site Layout Plan, Site Grading Plan and site-development drawings; Single Line Diagrams (SLDs), control philosophy, electrical, instrumentation, automation and control system drawings, data sheets and external electrification plans; civil and mechanical General Arrangement (GA) drawings; architectural drawings; structural designs, structural and construction drawings; mechanical equipment layouts, piping layouts, drawings and mechanical/piping data sheets; technology structure drawings including foundations, internal roads, pathways and Approach Road For De-Sludging Vehicle, platforms, protection works, drainage arrangements, Boundary wall, bypass arrangements and treated effluent Arrangement for Reuse via G.I. /HDPE pipeline, as required for the site and as directed by the Engineer-in-Charge (E-in-C). The Contractor shall also prepare Quality Assurance (QA) documentation, construction procedure manuals, Inspection and Test Plans (ITPs), test procedures and other documents required for construction, inspection, testing and commissioning. Wherever required by the Employer/E-in-C, the designs anddrawings shall be vetted/reviewed by reputed technical institutions such as IITs or |
| 3 | Process design Engineering and GA & structural drawings etc complete for 18 kldFSTP |
| 4 | CIVIL WORKS & STRUCTURAL WORKS INCLUDING ELECTRO-MACHANICAL WORKS |
| 5 | Providing, designing, engineering, procurement, installation and commissioning of 18 KLD faecal sludge / septage treatment plant with Any Suitable technology, including all electro-mechanical works with all accessories with all other loading, unloading, transportation charges and conveyance of all materials, labour, equipment, transportation charges and all other incidental charges required for successful completion of work as per approved specification, drawings etc,. complete as per the directions of the Engineer-in-charge of the work complete to achieve pH=6.5-9.0, BOD<=10 mg/l,TSS<=20 mg/l ,COD<=50 mg/l,NH4-N<=5 mg/l ,Total Nitrogen<=10 mg/l, PO4-P <=1 mg/l & Faecal Coliform (MPN/100 ml) Desirable 100 Permissible 230 Or for special Arrangement Faecal Colifom<=0 to get recyclable quality of water for industrial / agricultural purposes. Plant Capacity-18 KLD including DG Set |
| 6 | Truck Mounted sewer suction cum jetting Machine:- |
| 7 | Supply, Installation, Testing and Commission of Truck Mounted Sewer Suction cum Jetting machine.Total tank capacity - 3000 Ltrs Water tank capacity - 1000 Ltrs Sludge tank capacity - 2000 Ltrs Truck Chassis TATA LPT712 BS6 Wheel Base - 3550 to 3920GVW - 7490 KgAccessories:-Suction Hose 3 inch 100 Mtr (1 Nos.)Suction Hose 2 inch 50 Mtr (1 Nos.)(Diesel/Fuel consumption of 3000 litres (3.00 KL) Truck Mounted Super suction cum jetting machine should be minimum 04 Km/L for driving / transit mode and minimum 03 L/hr for stationary operation via truck power take off (PTO) |
| 8 | GIS Based survey |
| 9 | GIS Based survey and tagging of house hold & GIS Application for mapping and installation of Septage Monitoring IT cell including all necessary equipments etccomplete. |
| 10 | Conducting GIS-based survey and geo-tagging of all households within the project area; preparation, compilation and updating of GIS-based maps and database; mapping and tagging of sanitation infrastructure, septic tanks, pits and other relevant septage management assets; development/deployment of GIS application for mapping, monitoring and management of septage collection and disposal activities; and establishment of a dedicated Septage Monitoring IT Cell including all necessary hardware, software, GIS platform, networking equipment, data storage, accessories and other required equipment, along with installation, configuration, integration, testing, commissioning, data management and training, complete in all respects as per the requirements of the project. |
| 11 | Site Development works |
| 12 | Earthwork in excavation for structures as per drawing and technical specificationClause 305. |
| 13 | 1.0 CARRTAGE OF MATERIALS By Mechanical including loading,unloadingcomplete. EARTH 5 Km with in th site. |
| 14 | Plain cement concrete M 10 grade |
| 15 | Stone masonry in cement mortar 1:5 |
| 16 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 |
| 17 | Hand Packed stone filling in back of wallls including cost of all materials,royality,T&Petc. complete as per direction of Engineer-in-charge. (As per PWD Uttarakhand specifications) |
| 18 | Providing P.C.C M20 architectural coping on top of wall |
| 19 | Providing & Laying reinforced cement concrete arch complete including centering and shuttering excluding reinforcement as per drawings and technicalspecifications Clauses 800, 900 and 1205.1 |
| 20 | Reuse Arrangement for treated Wastewater |
| 21 | Providing, Lowering into trenches with true to alignment,Laying & jointing of full lenghts of HDPE pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials.: J -PE-100 Grade;PN-8.0(8.0 Kg/Cm2) 200 mm PN8 |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 32 mm nominal bore |
| 24 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) : |
| 25 | Boundary Wall Work |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 27 | Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) grade. |
| 28 | Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) grade of reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement. |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level as well as above plinth level - for Thermo-Mechanically Treated bars |
| 30 | Centering and shuttering including strutting,ropping etc. and removal of form |
| 31 | For foundation |
| 32 | For column |
| 33 | For beam |
| 34 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 35 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand). |
| 36 | Finishing walls with exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). |
| 37 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) grade. |
| 38 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard gates and similar works bar, ladder, railings, brackets, gates and similar works . |
| 39 | Water Supply Work |
| 40 | Excavation in soil mixed with single boulder etc. requiring the use of specials T&P, if any ,for pipeline trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches. |
| 41 | Providing of all materials, carting from site store to site of work, laying & jointing of G.I pipes conforming to IS:1239(PART-1) including supply of all jointing materials like specials, white lead,hemp and oil etc in trenches with its cutting,threading and testing of pipe line etc complete.Medium Duty (Class 'B'):25 mm dia |
| 42 | OPERATION AND MAINTENANCE WORKS |
| 43 | Operation and Maintenace Cost of FSTP (including cost of chemical & disposal of plant residuals viz. screening, grits, dewatered sludge etc.) but excluding power / electricity and fuel (HSD) for DG operation. |
| 44 | For 1st Year |
| 45 | For 2nd Year |
| 46 | For 3rd Year |
| 47 | For 4th Year |
| 48 | For 5th Year |
| 49 | 05 year Operation and maintenance works for GIS based IT cell setup including all necessary works. |
| 50 | 1st year Operation & Maintenance |
| 51 | 2nd year Operation & Maintenance |
| 52 | 3rd year Operation & Maintenance |
| 53 | 4th year Operation & Maintenance |
| 54 | 5th year Operation & Maintenance |
| 55 | 5 Years O&M for De-Sludging Vehicle (Operation & Maintenance of TwoNos. De-sludging Vehicle with driver, helper & Sweeper/Sewerman for each vehicle. This cost includes insurance & taxes of both vehicles but diesel cost is excluded.) |
| 56 | For 1st Year |
| 57 | For 2nd Year |
| 58 | For 3rd Year |
| 59 | For 4th Year |
| 60 | For 5th Year |
| 61 | For 18 KLD Capcity FSTP, Capitalized Power / Energy cost for 05 Years at 10% Discount Rate {To be calculated as follows Discounted Power Cost = (A) X 365 x 8 x 3.79Whereas-(A) is Guranteed Power Consumption in KW.hr/day (To be Gurantted by Bidder) Rate of Power to be considered for evaluation=Rs.8 per KWH/day, Discounting Factor for 05 years at 10% Discount Rate = 3.79) (Note: 05 years Capatalised Electricity Cost in Rs. shown in the quantity columnand thebidder has to enter the guaranteed power consumption in the rate column so that amount will be calculated in Rs. in the amount column) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender