Tender For Emf Of Sector-18B,Dwarka, Hig Flats Hs-2010.Sh: Day To Day Maintenance Of Internal And External electrical installation Works,Dg Sets,Fire Fighting & Fire Alarm System, Pa System ,Lift Pressurization System & Intercom System Etc. At 490 Ms
Tender Value
25.24 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
50484
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emf Of Sector-18B,Dwarka, Hig Flats Hs-2010.Sh: Day To Day Maintenance Of Internal And External electrical installation Works,Dg Sets,Fire Fighting & Fire Alarm System, Pa System ,Lift Pressurization System & Intercom System Etc. At 490 Ms Hig Houses Pkt-I & 457 Ms Hig Houses Pkt-Ii In Sec 18-B, Dwarka, Ph-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation, Testing & Commissioning of LED recessed/surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard.Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management:heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). A) Powder coated die cast /Extruded aluminium Body including trim .---22 Watt |
| 2 | Supply and replacement of defective MCCB with following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required . (DSR-2025) a) 125 A,36KA,FP MCCB |
| 3 | b) 250 A,36KA,FP MCCB |
| 4 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.(a) SP |
| 5 | (b) DP |
| 6 | Supply & replacement of faulty engine conrtoller of 160 KVA DG sets i/c connections, testing etc as reqd.(i/c rebate for dismantle materials) |
| 7 | Supply & replacement of faulty AVR of 160 KVA DG sets i/c connections, testing etc as reqd.(i/c rebate for dismantle materials). |
| 8 | Supply of the following electrical items etc as reqd. suitable for operation of single phase 220-240V AC supply :- a) SP 5/6 Amp, one way switch, piano type ISI marked |
| 9 | b) SP 15/16 Amp, one way switch, piano type ISI marked |
| 10 | c) 3 Pin 5/6 Amp, socket outlet, piano type ISI marked |
| 11 | d) 6 pin 15/16 & 5/6 amps, socket outlet, piano type ISI marked |
| 12 | Supplying and drawing following sizes of ISI marked,FRLS PVC insulated copper conductor ,single core cable in the exixting surface /recessed steel /PVC conduit as required a) 1.5 sq mm |
| 13 | b). 4 sq mm |
| 14 | c). 16 sq mm |
| 15 | Supplying & fixing suitable size of phenolic laminated sheet cover in front etc. as reqd. i/c cutting for switches / socket, fixing of piano type switch, connection testing etc. as reqd.(a) 3 mm thick phenolic laminated sheet |
| 16 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%,Input voltage: 140-270 Volt AC, frequency 50/60 hz,Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumptionshould not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).* 90 Watt |
| 17 | Supplying & replacement of faulty CFL bulbs installed in all 60 Nos. lift shafts with following items in the existing light fittings complete with connection, testing etc. as required. a) LED Bulb with Ordinary Holder - 9 Watt |
| 18 | Supply, testing and commissionning of 1 HP Submersible Dewatering Pump set -- Ama Porter 501 SE Model (Vertical monoblock type) suitable for single phase, 50 Hz, 220/240V AC supply having Free Passage: 45 mm , 10 mtr. head & 110 LPM & inlet/outlet dia 50 mm, IP 68 Protection & along with 10 mtrs 3-core, 1.0 sq. mm (3 x 1 mm²) flexible submersible power cable & & inbuilt Float Switch for automatic ON/OFF & test certificate i/c thimbling, connections, testing etc complete as reqd. |
| 19 | Supply & replacement of defective disconnector fuse switch unit with following capacity TP&N disconnector fuse switch unit (DM series ) in Sheet Steel Enclosure with ISI marked HRC fuses including drilling holes , making connections,testing etc. as required. A) 400 A TP&N (i/c rebate for dismantle materials) |
| 20 | Supply & replacement of mechanical seal, bearing and bush, alignment of pump, oiling, greasing etc. of main Electric driven Main Pump ,Sprinkler pump Set & diesel engine pump set having a discharge upto 2850 LPM at suitable Head coupled to Electric Motor i/c providing gland packing as required and re-installing, re-testing & commissioning of the same complete as required.The Job also includes putting the same in automatic operation mode of the Main pump set to make it functional as per local Fire Service requirements.(i/c rebate for dismantle materials) |
| 21 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender