Tender For Augmentation Of Drinking Water System At Maharana Pratap Airport, Udaipur.
Tender Value
48.74 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
97489
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Drinking Water System At Maharana Pratap Airport, Udaipur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing & Commissioning of Reverse Osmosis (RO) Water Treatment Plant comprising of External Filter (Dual Media Filter), 5 Micron Cartridge Filters, Reverse Osmosis System, suitable for raw water up to TDS 3000 ppm-4000 ppm, complete with all pumps, antiscalant dosing system including first fill of antiscalant, instrumentation, piping, valves, control panel, accessories and interconnections, mounted on SS 304 skid, complete as required.The system shall not be inferior to the minimum specifications indicated below and shall meet the guaranteed performance parameters. |
| 2 | Industrial type 250 LPH RO Plant(i) Raw water feed pump 1 m³/hr @ 15–20 m head, 0.5 HP - 1 No.(ii) 5 micron cartridge filter 20 x 4 inch - 03 Nos(iii) Antiscalant dosing system with 50 litre HDPE tank and dosing pump - 1 Set(iv) High pressure multistage pump with SS 304/316 wetted parts - 1.5 HP - 1 No.(v) RO membrane 4040 TFC type with FRP pressure vessel - 1 No.(vi) Micro controller based automation panel with low & high pressure safety, dry run protection and water level sensors - 1 Set(vii) Pressure gauges, flow meters, CPVC piping, valves and fittings complete(viii) SS-304 skid with ss powder coating mounted structure with anti vibration pads complete as required for feed water TDS up to 3000 ppm complete as per technical specifications. |
| 3 | Industrial type 500 LPH RO Plant(i) Raw water feed pump 2 m³/hr @ 20 m head, 1 HP - 1 No.(ii) Dual media filter with activated carbon and multi grade sand media in FRP vessel of dimensions 12\\" x 48\\" with multiport valve - 1 Set(iii) 5 micron cartridge filter 20 x 4 inch - 03 Nos(iv) Antiscalant dosing system with 75 litre HDPE tank and dosing pump - 1 Set(v) High pressure multistage pump with SS 304/316 wetted parts - 2 HP - 1 No.(vi) RO membrane 4040 TFC type with FRP pressure vessel - 2 Nos.(vii) Micro controller based automation panel with low & high pressure safety, dry run protection and water level sensors - 1 Set(viii) Pressure gauges, flow meters, CPVC piping, valves and fittings complete(ix) SS-304 skid with ss powder coating mounted structure with anti vibration pads complete as required for feed water TDS up to 4000 ppm complete as per technical specifications. |
| 4 | Industrial type 1000 LPH RO Plant(i) Raw water feed pump 3 m³/hr @ 25 m head, 1 HP - 1 No.(ii) Dual media filter with activated carbon and multi grade sand media in FRP vessel of dimensions 13\\" x 54\\" with multiport valve - 1 Set(iii) 5 micron cartridge filter 20 x 4 inch - 03 Nos(iv) Antiscalant dosing system with 150 litre HDPE tank and dosing pump - 1 Set(v) High pressure multistage pump with SS 304/316 wetted parts - 3 HP - 1 No.(vi) RO membrane 4040 TFC type with FRP pressure vessel - 4 Nos.(vii) Micro controller based automation panel with low & high pressure safety, dry run protection and water level sensors - 1 Set(viii) Pressure gauges, flow meters, CPVC piping, valves and fittings complete(ix) CIP system with cleaning tank and circulation arrangement - 1 Set(x) SS-304 skid with ss powder coating mounted structure with anti vibration pads complete as required for feed water TDS up to 3000 ppm complete as per technical specifications. |
| 5 | Supplying, installing, testing and commissioning of 5000 litres capacity SS-304 water storage tank, fabricated from minimum 2 mm thick SS sheet, complete with top cover, manhole, inlet, outlet, overflow, drain connections, screened vent, necessary stiffeners, fittings and accessories, including water leak testing and connection to the RO plant etc. complete as required. |
| 6 | Supply & fixing 500 litre capacity, triple layered, white colour, extra heavy duty, UV stabilized, roto-moulded, virgin plastic water storage tank with threaded lid and air ventilation lid, overall diameter 850 mm, overall height 1000 mm, diameter of manhole 420 mm, on existing foundation including providing locking and cleaning arrangement, float valve etc., complete as per site requirement. (Make: Sintex, Pure plus or equivalent) |
| 7 | Supply & fixing 1000 litre capacity, triple layered, white colour, extra heavy duty, UV stabilized, roto-moulded, virgin plastic water storage tank with threaded lid and air ventilation lid, overall diameter 1090 mm, overall height 1280 mm, diameter of manhole 420 mm, on existing foundation including providing locking and cleaning arrangement, float valve etc., complete as per site requirement. (Make: Sintex, Pure plus or equivalent) |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia Pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, as per site requirement but excluding ball valves, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints etc. complete as per site requirement. |
| 9 | Supply & fixing of Grade 304 SS water tank made out of 1 mm thick sheet with threaded lid and storage capacity 500 ltr with suitable stand, inlet and outlet control valve, float valve and locking arrangement etc. for treated water storage etc. complete as per site requirement. |
| 10 | SITC of 3 phase, 415 V, double door distribution board outdoor type having IP 54 protection made out of 2 mm thick CRCA sheet steel suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system with following switchgears and accessories : 1. Incomer :MCCB - 150 A, 4 P, 36 kA, Icu = 100% Ics with ROH - 2 no.2. Out goings: MCB - 63 A , FP - 4 nos.MCB - 25 A , SP - 4 nos.3. Al. Bus Bars 200 A - 1 Set4.Accessories - RYB indication lamps for i/c MCCB - 2 sets.5. Miscellaneous - Neutral link and earth bar etc. |
| 11 | Supply of 4 x 10 sqmm, 1.1 KV grade, XLPE insulated, PVC sheathed, armoured, aluminum conductor power cable conform to IS 7098 (part -1) with up to date amendments etc complete as required. |
| 12 | Supply of 4 x 16 sqmm, 1.1 KV grade, XLPE insulated, PVC sheathed, armoured, aluminum conductor power cable conform to IS 7098 (part -1) with up to date amendments etc complete as required. |
| 13 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 14 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size above 35 sq. mm and upto 95 sq. mm in the existing RCC/ HUME/ METAL / HDPE pipe as required. |
| 15 | Supply of spare quantities of RO membrane 4040 suitable for high TDS 4000 PPM. (Make : Hydranautics/ Dow Filmtec / Lexcru/ LCM/ Pentair/ CSM or equivalent reputed makes). |
| 16 | Supply of spare quantities of RO antiscalant chemical compatible with the RO membranes and raw water quality, for use in the antiscalant dosing system, complete in sealed containers. Provision of services provided by specialist - Technician / Egineers for repairing / servicing of water supply pump sets of capacity upto 7.5 HP (D.P. Holland - Make) installed in pump room. The job includes dismantling of existing pump-set and re-assembling the same after repairing of the impaler, diffuser, o-ring, bushes i/c mechanical seal etc complete as required, T & P also to be provided by the agency to repair the same as per site condition for complete the job as per satisfaction of E.I.C. for the pump sets as and when required. (Spares - wil be provided by AAI). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender