Tender For Miscellaneous Civil Maintenance Works For Staff Quarters And Buildings At Keonjhar.
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
5701
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Miscellaneous Civil Maintenance Works For Staff Quarters And Buildings At Keonjhar.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 3 | Of area 3 sq. metres and below |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 5 | Of area 3 sq. metres and below |
| 6 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 7 | 15 mm to 40 mm nominal bore |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 9 | Sub-Head : Concrete Work |
| 10 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 11 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Sub-Head : Wood and P.V.C. Work |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 14 | Sal wood |
| 15 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 16 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 17 | 100x58x1.90 mm |
| 18 | 75x47x1.70 mm |
| 19 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 20 | 250x16 mm |
| 21 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 22 | 200x10 mm |
| 23 | 150x10 mm |
| 24 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 25 | 100 mm |
| 26 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 27 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 28 | Marine plywood conforming to IS: 710 |
| 29 | Sub-Head : Roofing |
| 30 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 31 | (i)Single socketed pipes. |
| 32 | 110 mm diameter |
| 33 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 34 | Single pushfit Coupler : |
| 35 | 110mm |
| 36 | Single tee with door |
| 37 | 110x110x110 mm |
| 38 | Bend 87.5° |
| 39 | 110 mm bend |
| 40 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 41 | 110 mm |
| 42 | Sub-Head : Finishing |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 44 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 45 | Sub-Head : Repairs to Buildings |
| 46 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 47 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 48 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 49 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 50 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 51 | (a) Internal Work- Exposed on wall |
| 52 | Sub-Head : Sanitary Installations |
| 53 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 54 | 10 litre capacity - White |
| 55 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 56 | Flexible pipe |
| 57 | 32 mm dia |
| 58 | 40 mm dia |
| 59 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 60 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 61 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 62 | Sub-Head : Water Supply |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 64 | 20 mm nominal outer dia. Pipes. |
| 65 | 25 mm nominal outer dia .Pipes. |
| 66 | 40 mm nominal outer dia. Pipes. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 68 | 40 mm nominal outer dia. Pipes. |
| 69 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 70 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 71 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 72 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 73 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 74 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 75 | Providing and fixing PTMT grating of approved quality and colour. |
| 76 | Circular type. |
| 77 | 100 mm nominal dia. |
| 78 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 79 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 80 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 81 | 15 mm nominal bore with 45 cm length. |
| 82 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 83 | With common burnt clay F.P.S. (non modular) bricks. |
| 84 | Sub-Head : MARKET RATED ITEMS |
| 85 | Deduct for taking into posession the unserviceable dismantled materials including carriage: |
| 86 | Unserviciable Brass / PVC Bib/stop cocks/pillar tap |
| 87 | Dismantled damaged Gun metal gate valve 25mm to 40 mm. |
| 88 | Dismantled damaged CI / GI pipes. |
| 89 | Damaged doors and windows. |
| 90 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, takingout & refixing of grills where required etc, all complete as per the direction of the Engineer-in-charge. |
| 91 | Providing and fixing double scaffolding system on the exterior side upto seven storey height made with best quality bamboo ballies 1.5 m centre to centre, horizontal and vertical ballies joining with best quality coir ropes, 38 mm thick local hard wood planks for working platform and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per direction of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. |
| 92 | Repairing of flushing cistern by replacing damaged parts such as float/ siphon etc. with new parts as per requirement all complete as per direction of Engineer-in-charge. |
| 93 | Removing waste water manually from the septic tank of any size due to sewage water overflow in manholes and septic tank including all labour , tools and plants etc. complete as per the direction of Engineer-in-Charge, |
| 94 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) |
| 95 | Kasi / Acacia wood |
| 96 | 30 mm thick shutters |
| 97 | Repairing to aluminium door shutter by opening joints, frames if required and cutting the members to required length, providing and fixing aluminium angle cleats & dash fastener, if required , rearranging the pivots etc. for smooth operation of the Aluminium doors as per direction of the Engineer-in-charge. |
| 98 | Cutting and enrouting of big trees from compond wall with necessary ladder / scafolding ,applying acid for complete removal to prevent further growth including cutting of masonry and plastering the damaged portion complete as per direction of Engineer-in-charge. |
| 99 | Engaging labour for cleaning of open surface drains of any size, roof, terrace, chajjas at any floor at any height including all T & P, removal of debrishes, sullage and disposal all complete as per direction of Engineer-in-charge. |
| 100 | Weeding out trees/ plants/ vegetations growth from wall, roof, chajja or any part of the building at any height by uprooting with application of acid for complete removal to prevent further growth all complete as per direction of Engineer-in-charge. |
| 101 | Cleaning of drainage manholes alongwith connecting sewer lines including removing the soil, waste, sludge deposits, earth, rubbish etc. and disposal of same including flushing with sufficient water all complete as per direction of the Engineer -in- charge. |
| 102 | Providing and fixing CPVC Ball valve approved quality with handle in CPVC pipe line etc complete as per direction of Engineer-in-charge: |
| 103 | 25 mm diameter |
| 104 | 40 mm diameter |
| 105 | Providing and fixing CPVC Union in CPVC pipe line including cutting the pipe etc complete as per direction of Engineer-in-charge |
| 106 | 25 mm diameter |
| 107 | 40 mm diameter |
| 108 | Takingout & refixing of window grills of any size with required screws etc complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender