Tender For Maintenance Of Street Light Fittings Installed At Various Pwd Roads Under Pwd Emd South East, New Delhi. (Sh: Providing And Fixing Of Culvert Poles At Defence Colony Nala Road).
Tender Value
9.06 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
4 days left
EMD
18129
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Street Light Fittings Installed At Various Pwd Roads Under Pwd Emd South East, New Delhi. (Sh: Providing And Fixing Of Culvert Poles At Defence Colony Nala Road).
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Decorative Illuminated Pole with overall 6 meter height made of galvanised mild steel tublar having 200 mmx200 mm with 3.2 mm thichness Square at bottom section with Laser cut slits design pattern fully illiminated, Section-B tubilar with dia 76 mm with 3.2 mm thickness at top section. An additional diffused light section of 1000mm height shall be provided on the pole for enhanced illumination and aesthetic appeal. Pole is metalic pre treated to make it fine and core free. Pole is coated with epoxy primier to make it alkline proof to avoid the rust and finally coated with UV stabilize PU paint to make it UV stabilize as per desired color. Pole have base plate- 300 x 300 x12 mm, Sec A-200x200mm / 3.2 mm thick and 1 meter long, Sec B - 76mm / 3 mm thick and 4 meter long, with decorative single arm bracket 1 meter long and 900 mm wide including laser design pattern with logo to enhance the overall asthetic of a pole duly illiminated with warm white led alongwith bottom section. Pole have service window at the bottom comprising 4 way 25 Amp. connector mounted on backlite plate with DIN rail for mounting of MCB. Pole has a mild steel base plate having four numbers of mounting holes can be mounted with four nos. anchors bolts. |
| 2 | Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 450 mm (L) X 450mm wide and 1200mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 2000 mm long (approx) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx) 8 nos. (with 150 mm spacing) as requried with positioning of foundation bolts and provoding 40 mm dia (O.D.) DWC, HDPE pipe of 0.3 mtrs. length for cable entry & exit as reqd. |
| 3 | Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation bolt(EN8 grade) with nuts,washer including 2 Nos. template of 3 mm thick size 200mmX200mm with 4 Nos. 24mm dia holes to match with PCD of Pole base plate as reqd. |
| 4 | Fabrication, supplying & fixing of Designer single/double/tripple over hang PU Painted bracket made out of Suitable dia etc. complete as required.(Design as per approved sample). |
| 5 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 6 | 120 Watt |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 8 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | Supplying and laying of one number PVC insulated and PVC sheated/XLPE aluminium conductor armoured power cable of 1.1 KV grade of following size in existing HDPE pipe etc as reqd. |
| 10 | 4 x 16 sqmm |
| 11 | Supplying and drawing following sizes of PVC insulated aluminium conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd. |
| 12 | 3core x 2.5 sq. mm |
| 13 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 14 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 15 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender