Tender For Repair To Internal Roads, Culverts And Allied Works In Zone-I Area Under Age B/R-I Of Ge Jaipur
Tender Value
35 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
2 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Internal Roads, Culverts And Allied Works In Zone-I Area Under Age B/R-I Of Ge Jaipur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Nov-2026 | BOQ CORRIGENDUM | BOQ | 14-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82597/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPAIR TO INTERNAL ROADS, CULVERTS AND ALLIED WORKS IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR CA NO: CWE/JPR- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 3 | M&L for repair to pot holes exc 30mm depth not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg/ 10 sqm, using paving bitumen of grade VG-30 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed. |
| 4 | M&L for applying evenly a priming/tack coat with bitumen primer (VG-30) @ 5 kg per 10 sqm using paving bitumen complete all as specified and directed. |
| 5 | M&L for preparing of black top surface by brushing with wire brushes for removing caked mud and bushes near roadside etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and laying bituminous premix asphaltic semi dense concrete (Design Mix) 30 mm consolidated thickness, with 5.5% of binder content by weight of total mix and compacted to required camber and gradient rolling with power roller with 8-10 Tonne capacity to bituminous carpet for uniform surface complete all as specified and directed.Note:- Bitumen Mix will be prepared in Hot MIx Plant as per Design mix formula approved by GE and laying will be done by means of mechanical paver. |
| 6 | M&L for cleaning and preparing the bituminous road surface for road marking with reflective thermoplastic white road marking paint confirming to BIS-3262 laid through road marking machine in a 2.5 mm thick layer for painting lines, dashes, arrows, letters etc on road pavements and the like exceeding 10 cm wide with road marking paint white or golden yellow using 5 kg material per sqm by incorporating the white glass beads for reflectivity, complete all as specified and directed. |
| 7 | M&L for preparing old decorated surface of any description in kerb stones/concrete surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | M&L for 30 mm thick bitumen mastic wearing course with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surfaces with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning the surface, removal of debris etc complete all as specified and directed.Note:- Bitumen shall be used @ 14-17% as per MoRTH Specification. |
| 9 | S&F Geo fabric/ textile not less than 300 gram/ Sqm on concrete road joints complete all as specified and directed. |
| 10 | M & L for making 2.50 mm thick centre line, side line,stop line dashes, arrows, brackets & similars works width nexc 15 cm on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make 8% glasss beads laid at temprature 160 c with a special applicator machine complete & traffic diversion arrengement complete all as specified and directed |
| 11 | M&L for Premix bituminous macadam using paving bitumen of grade VG-30 using 4% binder material of weight of total mix (Paving bitumen any penetration) laid/rolled with 8 - 12 ton roller and compacted to required gradient and camber (consolidated thickness 75mm or less) |
| 12 | S&F in repair road safety convex mirror 80cm dia unbreakable polycarbonate lens ABS body, adjustable bracket with pipe including necessary fixing arrangements, excavation and earth work in soft/loose soil, foundation in PCC 1:2:4 type B-1 of size 150mmx150mmx300mm as approved by GE complete all as specified and directed |
| 13 | S & F in repair road stud Cat eye (100 x100x 18.5mm) made of ABS material two way reflectors fitted in the body and dynamically designed to bear load upto 25 tons and impact strength of about 255 KN weight of stud 130 gms. in red/white/yellow colours with swareflex bead. The material should be non-breakable, dust proof including fixing with bitumen adhesive BT-69 complete all as specified and directed by Engineer-in-charge |
| 14 | S & F in repair solar road stud (125 x125x 25mm) with dual shank of 65mm Aluminium allloy shell, Unbreakable poly carbonate clear facing designed made of ABS material two way fitted in the body and dynamically designed to bear load upto 10 tons and designed 100% water proof as per IP 67 , high effieciency mono crystaline solar 2.4 V/0.3 watt with Ni-Mh Rechargebale battery (1.2V /1600 MA) , Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela), View Distance: upto 1000 meters, Working Temp: 10 ~ 75 C, Working Time: 3 to 4 days after fully charged battery. in red/white/yellow colours with swareflex bead. The material should be non-breakable, dust proof including fixing with bitumen adhesive BT-69 complete all as specified and directed by Engineer-in-charge |
| 15 | Schedule of Credit Total in Figures 0.0 0.0 -800.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Eight Hundred Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender