Tender For Construction Of Guard Room In Certain Unit At Jaisalmer Mil Stn
Tender Value
43.75 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
4 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Guard Room In Certain Unit At Jaisalmer Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified and as directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated oridanary rock and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified. |
| 3 | Excavation in hard /Disintegrated rock not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable and getting out complete all as specified and diected at site. |
| 4 | M&L for cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for floor all as specified . |
| 5 | M & L for Reinforced cement concrete (Design Mix) (RCC-M25), (20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 6 | M & L for Reinforced cement concrete, (Design Mix) (RCC-M25) (20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified. |
| 7 | M & L for Reinforceed cement concrete (Design Mix) (RCC-M25) (20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 8 | M&L for RCC (Design Mix) (RCC-M25) (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 9 | Use and waste Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete. |
| 10 | Use and waste Form work in rough finished surfaces of of rectangular, square or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 11 | Use and waste Form work in rough finished surfaces of of rectangular sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified. |
| 12 | Use and waste Form work in rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick.complete all as specified. |
| 13 | Use and waste Form work in rough finished surfaces of edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widecomplete all as specified. |
| 14 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified. |
| 15 | Ditto as item No 13, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 16 | M & L for AAC (Autoclaved Aerated Concrete) Blocks of size 600mm X 200 mmx200mm, light weight, factory made joint with 3-5mm thick block jointing mortar/ polymer modified cementitious adhesive for thin bed application (3-5mm thick) complete all as specified and directed by Engr-in-Chargege. |
| 17 | M and L for rendering 10mm thick ready made plaster on internal walls by adding potable water by weight of material as mentioned by manufacture. Ready - Mix plaster shall complies with IS 1661 - 1972, IS-2250-1981, IS 2402-1963 and shall confirm the compressive strength @ 28 days - 10-15Mpa/Bulk density 1600-1800 Kg/m3 and pull out bond strength - > 0.5Mpa. |
| 18 | M and L for rendering 5mm thick ready mix self curing plaster on ceiling by adding potable water by weight of material as mentioned by manufacture. Ready - Mix plaster shall complies with IS 1661 - 1972, IS-2250-1981, IS 2402-1963 and shall confirm the compressive strength @ 28 days - 10-15Mpa/Bulk densityh 166-1800 Kg/m3 and ppuill out bond strength - > 0.5Mpa. |
| 19 | M and L for rendering 15mm thick ready made plaster on internal walls by adding potable water by weight of material as mentioned by manufacture. Ready - Mix plaster shall complies with IS 1661 - 1972, IS-2250-1981, IS 2402-1963 and shall confirm the compressive strength @ 28 days - 10-15Mpa/Bulk density 1600-1800 Kg/m3 and pull out bond strength - > 0.5Mpa. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed. |
| 21 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 22 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and as directed. |
| 23 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified. |
| 24 | M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface |
| 25 | M&L for 100mm cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for floor all as specified . |
| 26 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 27 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed. |
| 28 | ditto as item No 26 but on wall surfaces including 10mm th backing coat in CM 1:4 complete all as specified. |
| 29 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed. |
| 30 | M&L Glazed ceramic colour tiles of size 450 x 300 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including complete all as specified and directed. |
| 31 | S&F in repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete fixed in repairs. |
| 32 | S & F in repair Flushing cistern of PVC 10 ltr. cap. with single flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 33 | S & F in repair Vitreous china premium/1st quality urinal pedestal type of white colour, of size 355x340x535mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified.Make: Jaquar . Cat part No: URS-WHT-13261or equivalent make mentioned in Appendix 'C' |
| 34 | Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB/ urinal upto floor level complete all as specified and directed. |
| 35 | S & F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.' |
| 36 | S&F in repairs 15 mm size Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses screwed for iron pipe complete all as specified & directed.Make: (Jaquar) Cat No.CON-167KNB or equivalent make mentioned in Appendix 'C' |
| 37 | S&F in repair 15 mm size Basin inlet connection (Angular stop cock) with wall flange, chromium plated all as specified and directed. Make : Cat No (JAQUAR) CON-059KN or equivalent make mentioned in Appendix 'C' |
| 38 | S&F in repair 15 mm size bib tap long body with wall flange , chromium plated, screwed for iron pipe or for brass ferrule complete all as directed.Make: Cat No : CON-107KN (JAQUAR) or equivalent make mentioned in Appendix 'C' |
| 39 | S&F in repair 1200mmx800mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 40 | S&F in repair 500mmx1200mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 41 | S & F 1000 litres capacity white tripple layer, rotational molded, polythene water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet and outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 43 | Supply & Fixing 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/wall with connected all accessories complete all as specified and directed by Engr-in-charge. |
| 44 | Supply & Fixing 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/wall with connected all accessories complete all as specified and directed by Engr-in-charge. |
| 45 | S & F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement all as specified and directed |
| 46 | S & F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 47 | S & F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 48 | S & F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 49 | S & F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and as directed by Engineer - in charge. |
| 50 | S&F in PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 51 | S&F in repair PVC (SWR) 75mm dia in junction single, (Single T) equal or unequal completed all as specified and directed. |
| 52 | S & F in repair stack clamps out of 50 mm by 5 mm flat PVC and 16mm dia round PVC stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof completed all as specified and as directed by Engineer-in-Charge. |
| 53 | S & F in repair stack clamps out of 50 mm by 5 mm flat PVC and 16mm dia round PVC stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof completed all as specified and as directed by Engineer - in- Charge. |
| 54 | S & F in epair PVC (SWR) 110mm bends any radius all as specified and directed |
| 55 | S & F in repair PVC (SWR) 75mm bends any radius all as specified and directed. |
| 56 | S&F in repair PVC (SWR) vent cowl 110mm dia completed all as specified and as directed by Engineer - in- Charge. |
| 57 | S&F in repair PVC (SWR) vent cowl 75mm dia completed all as specified and as directed by Engineer - in- Charge. |
| 58 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 59 | S & F 30mm thick Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 60 | S & F for Steel windows with side hungshutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified. |
| 61 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified. |
| 62 | M&L for preparation of new surfaces of steel n. exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 63 | S & F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden/steel beads in squares n.exc. 0.50 sqm in each pane with puty or fixed with wooden bends including hacking out old broken glass from wooden/metal frame complete all as specified and directed. |
| 64 | Removing excavated material exc 500m but nexc 1.5 Km and depositing in low lying areas where directed. |
| 65 | Removing excavated material to a distance exc 50m but n.exc 100 m and depositing where directed at a level n.exc 1.50m from starting point complete all as specified and as directed by Enginneer in charge. |
| 66 | Returning filling in, including, spreading, leveling watering and well ramming in layers n exc 25 cm thick each, complete all as specified. |
| 67 | S&F for Galvanised Iron work post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 68 | M & L for 1.00mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 69 | M & L for Exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid and including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer -in-Charge. |
| 70 | OVERLAY - PU BASED ELASTOMERIC LIQUIED MAMBRANE SYSTEM FOR EXPOSED ROOF: M&L for providing and applying polyurethane liquid applied roof waterproofing with improved water ponding capability, thermal insulating elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 60% and Solar Reflectance Index 106 as per (ASTM E1980-19) / tear strength ~20 N/mm (Free film, 14 days, +30 °C) (ASTM D624) and Tensile strength-≥ 2 N/mm2 (ASTM D4541). It is applied at a minimum wet film thickness of 1.5 to 2mm in two coats by roller complete all as specified and as directed by the Engineer-in-Charge. Make: M/s Sika India Pvt Ltd/ Fosroc/Chemsol /Bostik / Choksey etc Tender Application Note From serial No. 67.00 to 84.00 :- (i) The structural rapair and strengthening and rehabilitation and roof treatment shall be applied by the company’s authorized applicator firm only.(ii) Contractor have to get prior approval of applicator or authorized agency by submitting its authorization letter to this office for approval prior to commencement of work. Department will conduct an official varification from manufacturer of its authorised agency.(iii) Submission of 5 year warranty certificate for structural repair and roof waterproofing treatment work over roof is mandatory after completion of work.(iv) The cost of Scaffolding work required at certain places is including in the respective items catered for repairs itself. No extra shall be paid for the same. |
| 71 | M&L for rubber moulded supplying and laying 60mm thick factory made chamfered edge cement concrete paver block of M-25 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.Note: colour and design as approved by GE |
| 72 | M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified. |
| 73 | S&F RCC pipe class NP-2 ISI marked laid to slope in trenches jointed and tested complete with collars for 150 mm dia pipe Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone agg) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm Bore diacomplete all as specified and directed by Engineer - in - Charge. |
| 74 | M & L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge. |
| 75 | M & L for rendering 15mm thick in CM (1:4) on stone, block masonry or concrete surfaces finished fair and even and smooth with out using extra cement complete all as specified and as directed by Engineer -in-Charge.. |
| 76 | M & L for Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching and forming channel inside manholes for section of pipe 100mm, 150mm or 200mm including finished smooth and even using extra cement complete all as specified and as directed by Enginneer in charge. |
| 77 | M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge |
| 78 | Material & Labour for 75 mm thick sand stone slabs as in drain covers,cover stone templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 i ncluding Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortarcomplete all as specified and as directed. |
| 79 | S & F automatic 2 Hp single phase electric submersiable utility drainage water pump for pumping of used for dewatering of sewage water alongwith connecting accessaries complete all as specifed and directed by Engineer-in-Charge.Make: Crumpton, Model No. : STPM22(1PH)-15 |
| 80 | M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:- |
| 81 | (a) One light point controlled by one switch |
| 82 | (b) One E/fan point controlled by one switch |
| 83 | (f) One socket 5 pin 5 Amps flush type on independent board |
| 84 | M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing |
| 85 | S&F switch piano flush type single pole one way 5 Amps |
| 86 | S&F switch socket combination 2 in 1, 5 Amps flush type |
| 87 | S&F switch socket combination 2 in 1, 15 Amps flush type |
| 88 | S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block |
| 89 | S&F MCB SP 240 volts 6-32 Amps |
| 90 | S&F isolator SPN 40 Amps 240 volts |
| 91 | S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 92 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 93 | S&F of building security light fitting LED 15 Watt IP 66 IK 07 pressure dia cast aluminium housing with high efficient LED as lihjting souce and PC cover having TOP opening sepreate drive compartment etc and connecting as specified and directed .Havells or Crompton/Philips equivalent as approved. |
| 94 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified. |
| 95 | Supply and fix in repair ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor. |
| 96 | S & F in repair/replacement for MCB DB TPN 4 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . |
| 97 | Supply and fixing in reapair MCB TPN 100 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. Make :Legrand/Havells/Indoasian |
| 98 | M&L in repair bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to 4.00 mm dia GI wire as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 15 mm dia light grade pipe for earth lead protection connected to electrical equipment and earthing test point , earth dolly and earth chamber as shown in elect plate No 2 of SSR Pt-I including all necessary earth work, excavation, earth chamber with PCC 1:3:6, Type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed Engr-in-Charge. Note : Testing of earthing of any type, after disconnecting from test point and other loops by using ISI marked digital/Analog earth tester of reputed make and test result shall be entered in a Earth Testing register and put up to the Engr-in-Charge after testing complete all as specified and directed. Test result for item No. 7 and all earthing in schedule to be provided to Engr-in-Charge before completion of work. Earth tester to be provided by the contractor himself. |
| 99 | Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of 16 Sqmm x 2 core size including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge |
| 100 | M & L for 32 mm dia HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection |
| 101 | S&F repair ,40 mm bore GI tubing \\"light garde \\"in treches on pole for protection of cables complete all as specified & directed by Enginner-in Charge . |
| 102 | M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender