Tender For Special Repair To Td Blocks Of Sncos Mess At Af Stn Uttarlai
Tender Value
48.06 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
96120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Td Blocks Of Sncos Mess At Af Stn Uttarlai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced cement concrete in floors or pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge. |
| 2 | M&L for 75mm thick PCC 1:4:8 type B-2(using 40mm graded aggr) as in sub base finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge. |
| 4 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick joint less (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) with providing of any dark colour border complete all as specified and directed by Engr-in-charge. |
| 5 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-charge. |
| 6 | M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. |
| 7 | Demolition of cement concrete reinforced of any descrition and in any position not otherwise specifially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge. |
| 8 | M&L for form work to soffits of suspended slabs such as roof slabs,cooking platform, floor slabs, landings and similar work, flat rought finished surface of concrete to RCC work , complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for RCC nominal mix type B-1, 1:2:4 (20mm graded aggregate) for slabs supported on walls , beams and columns in floors, roofs, landings, balconies, conopies, deck slab and in shelve and the like. complete all as specified and directed by Engr-in-charge. |
| 10 | S&F of precast cement concrete type B1 1:2:4 (20mm graded aggregate, with reinforced as required) as in baluster, decorative jali ,apex stones, pier caps, columns , posts of balcony, chajja/prjection any type and similar work set in cement mortar 1:4 and finish smooth with using putty and two coats of weather. complete all as specified and directed by Engr-in-charge. |
| 11 | M&L TMT bars 10 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter complete all as specified and as directed by Engr-in-charge. |
| 12 | Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 13 | M&L for coloured glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed by Engr-in-charge. |
| 14 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifieally provided complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for PCC 1:1.5:3 Nominal mix concrete type A1 ( Using 20mm graded aggregate) as in lavel course on roof, roof flooring, mass concrete and similar work, finish even and smooth without using extra cement. complete all as specified and directed. |
| 16 | M & L for 10 mm thick screed bed in cement mortar 1:4 complete mixed with water proofing compound as per manufacturer instructions over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajja / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying bitumen primer/tack coat of in dustrial bitumen 85/25 at the rate of 1.20kg/Sqm by the same agency as that of APP membrane. (c) Laying of APP based polymeric membrane minium weight 3kg/Sqm and miniume 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) land on primed surface by forced application using butane torch by torch application with 100mm side laps and 150mm end lap. (d) one coat of aluminium paint over a coat of primer apply on top surface of APP. (Note:- WPC shall be measured and paid separately) |
| 17 | Supply only integral water proofing compound. |
| 18 | Demolition of pcc block, built in cement mortar, complete all as specified and directed. |
| 19 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete. |
| 20 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 22 | M/L rendering 15mm thick on concrete surface or brick/stone work in CM 1:4 finished even and smooth with out using extra cement & using WPC as per manufacturer instruction similar work . all as specified and directed. (Note:- WPC shall be measured and paid separately) |
| 23 | M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work .complete all as specified and directed by Engr-in-charge. |
| 24 | M&L for rendering 5mm thick in CM (1:4) on concrete surface such as roof projection, chajja, fin & ceiling and similar work , finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for preparation of surface and applying two coats of oil bound distemper on newly plastered wall surfaces over one coat primer and over and including 1.50 mm thick wall care putty complete all as specified and directed by Engr-in-charge. |
| 26 | M & L for prepration of newly plastered external surfaces of wall and for applying two or more coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge. |
| 27 | Prepration on new plastered or unplastered ceiling surface and applying Three coat of white wash of the bldg. complete all as specified & directed by Engineer-in-Charge |
| 28 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 29 | S&F Powder coated(powder coating not less than min 50 Micron)aluminium frame for doors,windows, partition, ventilators with one or more rebates including joining cleat for fixing/sliding etc. Complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F Powder coated(powder coating not less than min 50 Micron) aluminium rolling/side hung window and ventilator shutters without sash bars, aluminium sections weighting 0.55 Kg/Mtr incl necessary joining leats, glazing lcip, subber packing, snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1Nos) hinges type B-21 100mm long(02 Nos suitable powder coated handle as required Powder coated aluminum snap beading screws etc . Complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F for framed work such as grills gratings etc with ends of bars shoudered and /or riveted, or forged into spikes, framed guard bars barred iron doors ladders framed blaluster walk way railings framework of waterr tands and similar works conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for preparation of new or untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed. |
| 33 | M&L sheet glass ordinary quality 4.8/5 mm thick(tinted/plain) and glazing with oil putty or aluminium clip and similar work in squares exc 0.5 sqm each pane fixed. |
| 34 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm. complete all as specified and directed. |
| 35 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 36 | S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised . |
| 37 | S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 38 | S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified. |
| 39 | Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr Each incl iron mangery complete. |
| 40 | S&F 125 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified. |
| 41 | S&F factory made flush shutters 35 mm thick, solid core construction with block board core and plywood face panels, commercial type, both side of shutterr covered with decorative type veneer in factory made/pressed with lipping/framed to match. complete all as specified & directedand designe as approved by Engineer-in-Charge. |
| 42 | S&F factory made 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2nd class hard wood). complete all as specified & directed by Engineer-in-Charge |
| 43 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed. |
| 44 | S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. complete all as specified and directed. |
| 45 | S&F floor door stoper (140mm length) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed to door complete. complete all as specified and directed. |
| 46 | S&F 300 mm ordinary MS rat rail rod pattern spring including roller and roller plate complete |
| 47 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer and over one coat of wood putty, complete all as specified and directed. |
| 48 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board(any coloured) of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng butt hinges with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-In-Charge, |
| 49 | S&F magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished. |
| 50 | S&F in repair Rotational moulded 3 layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl all fitting such as tank nipple/GI fitting incl PTMT float/ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Min weight 210 gms)and fixed to iron pipes etc. all as specified in SSR Part I for 1000 ltrs capacity incl dismantling of old tank.complete all as specified and directed by Engr-in-charge. |
| 51 | Dismantling of cast iron or reinforced concrete drain pipes/PVC pipe 100/75mm dia and under any type, jointed in cement mortar and taking out of trenches if required . |
| 52 | S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. |
| 53 | S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. |
| 54 | S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed. |
| 55 | S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 56 | S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches. |
| 57 | S&F 100mm bore bend (any radius) with duck foot or heel rest. |
| 58 | S&F 75mm bore bend (any radius) with duck foot or heel rest. |
| 59 | M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches, concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge. |
| 60 | M&L for 20 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches with concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge. |
| 61 | M&L for 25 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches incl taking down old pipe.complete all as specified and directed by Engr-in-charge. |
| 62 | S&F in repairs 20 mm bore Gun metal, globe, gate valves/Ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or for unions. complete all as specified and directed by Engr-in-charge. |
| 63 | S&F in repair looking mirror 4 to 5mm Thick decorative type beading of any size of standard quality bevelled edge mounted on 6 mm thick ply wood and fixed with rubber plugs, screws, cup washers, complete all as specified and directed. |
| 64 | S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, complete all as specified and directed by Engr-in-charge. |
| 65 | S & F in repair bib taps (long body) cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed, complete all as specified and directed by Engr-in-charge. |
| 66 | S&F of stainless steel wall hook for hanging cloth and towel hangers for 6 no of hook set fabricated on stainless steel flat plate as per sample approved by Engineer-in-Charge. |
| 67 | S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 68 | S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender