Tender For Repairs To Compound Wall, Barbed Wire, Chain Link Fencing, Security Gate, Plinth Protection And Other Connected Works At Vishwa Vihar Under Ge (Af) Marathahalli Bangalore
Tender Value
39 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
17 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Compound Wall, Barbed Wire, Chain Link Fencing, Security Gate, Plinth Protection And Other Connected Works At Vishwa Vihar Under Ge (Af) Marathahalli Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for as specified and directed. |
| 2 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate plinth protection finishing surface even and fair incl. making of groove as specified and directed. |
| 3 | M&L for 75 mm thick PCC 1:4:8 (40 mm graded aggregate) type D2 as in sub- base of floor complete all as specified and directed. |
| 4 | M & L for sand filling (Cushion 30mm thick) in pathway including watering and consolidation as directed |
| 5 | M&L for Machine pressed precast concrete interlocking polished paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over and including machine compacted sand cushion all as specified and directed. etc complete. |
| 6 | M&L for machine pressed Pre-cast cement concrete interlocking polished paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment, colour laid over and including machine compacted sand cushion all as specified and directed. |
| 7 | Material and labour for 20mm thick screed bed or bedding layer in CM 1:4 for laying of tiles, complete all as specified and directed. |
| 8 | Material and labour for rubber moulded Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed with white cement and pigment in floors, complete all as specified and directed. ( with gray cement no pigment) |
| 9 | Demolition of cement concrete (reinforced)(other than ground floors), staircases, landing,chajjas and similar suspended work including reiforcement cut to facilitate.(Note: Height of the building varies from 3m to 10m from GL) |
| 10 | M&L for Reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in slab supported on wall, beam ,roofs, landing, chajja, shelves etc all as specified and as directed. |
| 11 | M&L for mild steel bars 8 mm dia and over TMT bar, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed. |
| 12 | Demolition of cement concrete/ removal of waterproofing membrane/roof tiles (unreinforced)(other than ground floors),roofs and similar suspended work.(Note: Height of the building varies from 3m to 20m from GL) |
| 13 | Roughening surfaces of old concrete/brick floor by picking, sweeping clean and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.0kg of cement per sq. metre all as specified and directed. |
| 14 | Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in as in padding of roof for making slope, coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed. |
| 15 | M&L for Rendering 10mm thick on fair face of concrete surfaces in CM 1:3 with WPC as specified finishing even and smooth with out using extre cement. |
| 16 | Supply only integral water proofing compound all as specified |
| 17 | M&L for labour for preparation of surface by removing dust,dirt and applying oil bound bitumen primer @0.20Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0Kg/sqm reinforced with non woven polyester matt weighing not less than160gm/sqm having softening point not less than 150̊ degree centigrade, having tensile strength of 650N/sqcm and 350N/sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of180N by torch application with minium 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumin 90/15 over the membrane @ 1.2Kg/sqm and on drying apply a coat of solar reflective bituminous aluminium paint over membrane @ 0.1kg/sqm all as specified and directed. |
| 18 | Taking up or down 25mm bore steel tubing and connection including cleaning for refixing all as specified and as directed |
| 19 | Disconnection exisiting PVC water tanks of 500 liters to 1000 liters capacity setting aside or lowering for carrying out roof repairs etc, includingn cleaning and removal of all scale, dirt etc from tanks and from mouths of circulating pipes, hoisting the tanks reconnecting and refixing in position, all as specified and as directed |
| 20 | Dismantling Asbestos cement/ GI Galvalume (corrugated,semicorrugated, etc.) sheets in roof coverings |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in roof. |
| 22 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 23 | S & F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where onnected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 24 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 26 | S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 27 | S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 28 | M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and intle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed. |
| 29 | Dismantling of of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 30 | M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling/truss section using GI wire with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl frame work for ceiling and OBD painting in celing with 2 coats of distemper over a coat of primer incl preparation of false ceiling surfaces as all directed and specified by Engr-In-Charge. |
| 31 | S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre ceiling tiles of Classic lite RH99 complete all as specified and as directed. |
| 32 | Removing by cutting/up rooting plant/tree under surface of wall/celling/roof including pouring of acid on the place and making good the damage portion with cement mortar 1:3 or concrete 1:2:4 type B1 using 20 mm graded aggregate complete and removing of material retrived from above work to outside of MoD landall as specified and as directed (Note: Height of bldg is upto 15m) |
| 33 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as directed. (Note: Height of bldg is upto 15m) |
| 34 | M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc.10cm in width and setting in mortar complete in CM 1:6 all as specified and directed. |
| 35 | Taking down cement or cement lime plaster on brick or stone wall/ceiling etc. including racking out joints, hacking for key, scrubbing down with water etc., all as specified and directed. |
| 36 | M&L Rendering 15mm thick on fair faces of concrete surface in cement mortar 1:4 finished even and fair without using extra cement all as specified & directed. |
| 37 | M&L two coat of cement based paint on undecorated wall surfaces including preparation of new plastered surfaces all as specified and directed. |
| 38 | M&L for preperation of new steel surfaces girth exc. 10cm and apply two coat of synthetic enamel paint over a coat of red oxide primer. |
| 39 | Dismantling floor hearth or wall tiling incling cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the permises (outside the complex area) all as specified and directed. |
| 40 | M&L for Cool Roof SRI tiles (White colour, matte finish) of size 300mm x 300mm x 10mm thick set in CM 1:4 over 15mm screed bed in 1:6 in roof surfaces, etc., incl, cleaning of surfaces, cutting, jointing filling using Dr. Fixit tile joint filler (404 FEVIMATE TG) or by Granule Mix with 1:1 or equvalent ratio with white cement as recommended by manufacturer, complete all specified and directed. |
| 41 | Removing building materials etc to a distance of 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
| 42 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation. |
| 43 | Returing, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm, hard/dense soil |
| 44 | Removing building materials etc. to a distance of 5 Km out side MoD/Unit land including loading, unloading and stacking at the destination etc. complete all as direction of Engineer-in-charge, |
| 45 | M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in CM 1:6 including hammer dressing all as specified and directed. |
| 46 | All as per above Item No 45 but except material , complete all as specified and directed. |
| 47 | Extra over stone masonry for hammer dressing to face stones and dressing offace beds and joints as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm complete for lime or sand stones, complete all as specified. |
| 48 | M&L Keyed pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified. |
| 49 | M&L for flush pointing to squared rubble masonry, uncoursed or brought upto courses in CM 1:4, complete all as specified and directed by Engineer - in - charge. |
| 50 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 but except Blocks etc. complete. |
| 51 | M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 52 | Rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement. |
| 53 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified |
| 54 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) coforming to Fe 410 -W (Gde E-250) Quality -A all as specified and directed. |
| 55 | S&F for angle iron posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 56 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 57 | Dismantling fencing wire mesh, any type |
| 58 | Supply only chain link MS galvanised fencing any size or type , complete all as specified and directed by Engineer - in - charge. |
| 59 | Fixing only chain link fencing including line wires,, any mesh, size and type to any type of standards, rails, straining bolts, welding work required etc. including provision of winding wire, complete all as specified and directed by Engineer - in - charge. |
| 60 | Dismantling barbed wire fencing of any description |
| 61 | S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately). |
| 62 | Fixing only Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately). |
| 63 | Supply and Fix in repair for zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 Kg per coil all as directed. |
| 64 | Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, etc and applying One coat of cement base paint Complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender